Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply User Manual

1. Entwodiksyon

This manual provides essential information for the installation, operation, and maintenance of your new Vetroo 850W 80 Plus Gold Full Modular ATX 3.1 Power Supply. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: Vetroo 850W Power Supply (White)

2. Pwodwi Features

• Pare pou PCIe Jenerasyon 5.1: Meets the latest PCIE 5.1 standards for improved performance and efficiency. Backward compatible with both PCIE 4.0 and 3.0.
• Fully ATX 3.1 Compliant: Designed to meet the newest, most advanced power supply standards.
• Premium 105°C Capacitors: High-quality materials and construction ensure stable, low-temperature operation.
• 80 Plus Gold Certified: Meets high standards for quality and efficiency, ensuring reliable performance and energy savings.
• Konsepsyon konplètman modilè: Allows for easy cable management and customization, reducing cable clutter by only installing necessary cables.
• Operasyon trankil: Features a 120mm FDB (Fluid Dynamic Bearing) fan for quiet cooling.

Figi 2: Plis paseview of Vetroo 850W Power Supply features

3. Pake kontni

Verifye ke tout konpozan yo prezan nan pake a:

• Vetroo 850W Power Supply Unit
• Modular Cable Set (including 24-pin ATX, CPU, PCIe, SATA, Molex, FDD connectors)
• AC pouvwa kòd
• Montaj Vis
• Lyen Jesyon Kab
• Storage Bag for Unused Cables

Figi 3: Kab Modilè ki Enkli yo

4. Enfòmasyon sou Sekirite

WARNING: Improper installation or use can result in serious injury or damage to your system.

• Always disconnect the AC power cord from the wall outlet before installing or removing the power supply.
• Pa ouvri inite ekipman pou pouvwa a. Gwo vòltajtages yo prezan anndan, menm lè yo dekonekte.
• Ensure all cables are securely plugged into their respective ports. Loose connections can cause damage.
• Use only the modular cables provided with this power supply. Third-party cables may not be compatible and could cause serious damage.
• Install the power supply in a well-ventilated area, away from high humidity and extreme temperatures.

5. Enstalasyon ak Enstalasyon

Follow these general steps for installing your power supply. Refer to your PC case and motherboard manuals for specific instructions.

1. Prepare Sistèm ou an: Asire w ke òdinatè w la etenn epi li debranche nan priz miray la.
2. Monte ekipman pouvwa a: Secure the power supply unit into the designated bay in your PC case using the provided mounting screws.
3. Konekte kab prensipal kouran yo: Konekte kab ATX 24-pin lan ak kat manman ou an.
4. Connect CPU Power Cables: Connect the 8-pin (4+4) CPU power cable(s) to your motherboard.
5. Connect PCIe Power Cables: Connect the necessary PCIe power cables (e.g., 12V-2x6 for PCIe 5.1 GPUs, or 8-pin (6+2) for older GPUs) to your graphics card(s).
   

   Figure 4: Dual PCIe 5.1 Connectors

6. Konekte kab periferik yo: Connect SATA, Molex, and FDD cables to your storage drives and other peripherals as needed.
7. Jesyon kab: Utilize the fully modular design and included cable ties to route cables neatly, improving airflow and aesthetics.
8. Tcheke final la: Double-check all connections to ensure they are secure before closing your PC case.

6. Operasyon Enstriksyon

After successful installation, you can power on your system.

• Pouvwa sou: Connect the AC power cord to the power supply and a wall outlet. Flip the main power switch on the power supply to the 'ON' position.
• Mòd ECO: The power supply features an ECO mode switch. When 'ON', the fan will stop spinning unless the load is above approximately 50% of the rated capacity, ensuring silent operation at low loads. When 'OFF', the fan will spin continuously.

Figure 5: Power Switch and ECO Mode

7. Antretyen

Bon antretyen asire lonjevite ak pèfòmans optimal ekipman pou pouvwa ou a.

• Netwayaj: Periodically clean the exterior of the power supply and the fan grille to prevent dust buildup, which can impede airflow and cooling. Use compressed air or a soft brush. Ensure the power supply is off and unplugged before cleaning.
• Operasyon Fan: The 120mm Fluid Dynamic Bearing fan is designed for durability and quiet operation. In ECO mode, the fan may not spin at low loads; this is normal.

NAN. Depanaj

Si ou rankontre pwoblèm ak ekipman pou pouvwa ou a, konsidere bagay sa yo:

• Pa gen pouvwa: Ensure the AC power cord is securely connected to both the power supply and the wall outlet. Verify the main power switch on the power supply is in the 'ON' position. Check your wall outlet with another device.
• Enstabilite/Arrêt Sistèm: This power supply includes multiple protection features (OVP, OCP, OPP, SCP, UVP, OTP) to safeguard your components. If your system is unstable or shuts down unexpectedly, it could indicate an issue with power delivery or another component. Ensure all power connections are firm.
• Vantilatè a pa ap vire: If the ECO mode is enabled, the fan will not spin until the power supply reaches approximately 50% load. This is normal operation for quiet performance. If the fan does not spin under heavy load, contact support.
• Bwi ki pa nòmal: If you hear unusual noises (e.g., coil whine, grinding), power down your system immediately and contact support.

9. Espesifikasyon

10. Garanti ak sipò

The Vetroo 850W Power Supply comes with a 10-ane garanti, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or any questions regarding your product, please visit the official Vetroo websit oswa kontakte depatman sèvis kliyan yo.