Entwodiksyon
Thank you for choosing the Feit Electric 2ft LED T8 Linear Tube Light. This manual provides important information regarding the installation, operation, and maintenance of your new LED tube lights. These 10-watt (20-watt equivalent) direct replacement (Type A) non-dimmable linear LED tubes are designed to replace F17T8, T8, F20T12, or T12 fluorescent and LED tubes. They are engineered for quick and easy plug-and-play installation with most existing magnetic and electronic ballasts, requiring no rewiring. Each tube delivers 800 lumens of 4000K Cool White light, offering significant energy savings and a long lifespan of up to 50,000 hours.
Enfòmasyon sou Sekirite
Please read and understand all safety instructions before installation or use. Failure to do so may result in electric shock, fire, or other injuries.
- AVÈTISMAN: Risk of shock. Disconnect power at the source before installation, inspection, or removal.
- Do not install this product in a pre-heat luminaire with non-shunted bi-pin lamp moun ki gen yo.
- Sa a lamp operates only on electronic or magnetic ballasts. If the lamp does not light when installed in the luminaire, remove the lamp soti nan luminaire a epi kontakte l laamp manifakti oswa elektrisyen ki kalifye.
- Aparèy sa a pa fèt pou itilize ak sòti ijans.
- Do not use with dimmers. This product is non-dimmable.
- Pa gade dirèkteman nan tib dirije fonksyònman an.
- Asire ke aparèy la byen chita.
- Do not modify the tube or its components.
- Apwopriye pou damp kote yo ye.
- Mercury-free and shatter-resistant coating for safe disposal.
Pwodwi souview
The Feit Electric LED T8 Linear Tube Light is designed for efficient and long-lasting illumination. It features a G13 base for easy plug-and-play installation into compatible fixtures.
Image: A pack of twelve Feit Electric 2ft LED T8 Linear Tube Lights, showcasing their uniform design and quantity.
Image: A detailed diagram illustrating the 2ft length and 1-inch diameter of the LED tube, along with key specifications such as 800 lumens brightness, 4000K Cool White light color, 50,000 hours life, 10 watts power consumption, and G13 base code.
Karakteristik kle:
- Enèji efikas: 10W power consumption, equivalent to 20W fluorescent tubes.
- Ekleraj klere: 800 lumens of light output.
- Limyè blan fre: 4000K color temperature for a balanced, neutral white light.
- Long Lifespan: Jiska 50,000 èdtan nan operasyon.
- Direct Replacement (Type A): Works with most existing magnetic and electronic ballasts.
- Enstantane sou: No warm-up time, flicker-free illumination.
- San danje: Mercury-free with a shatter-resistant coating.
Enstalasyon ak Enstalasyon
These LED tubes are designed for simple plug-and-play installation into existing fluorescent fixtures with compatible ballasts. No rewiring is necessary.
- Etap 1: Dekonekte kouran an. Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box. This is a critical safety step.
- Step 2: Remove Existing Fluorescent Tubes. Carefully remove the old fluorescent tubes from the fixture. Allow them to cool if they have been recently in use.
- Step 3: Insert LED Tube. Align the G13 pins of the Feit Electric LED tube with the lamp holders in the fixture. Gently push and twist the tube until it is securely seated. Ensure both ends are properly connected.
- Etap 4: Retabli kouran an. Once all LED tubes are securely installed, restore power to the fixture from the circuit breaker or fuse box.
- Step 5: Verify Operation. Turn on the light switch to confirm the LED tubes illuminate instantly and without flickering.
Image: A close-up of hands installing a Feit Electric LED tube light into a ceiling fixture, demonstrating the quick and easy direct replacement process.
Image: An illuminated Feit Electric LED tube light, showcasing its 4000K Cool White light output in a typical setting.
Image: A garage setting with a Feit Electric LED tube light installed, demonstrating its instant full brightness and lack of flickering or strobing.
Nòt: Si l laamp does not light when installed, remove it and contact Feit Electric customer support.
Enstriksyon Operasyon
Once installed, the Feit Electric LED T8 Linear Tube Light operates like a standard fluorescent tube. Simply use the existing light switch to turn the light on or off. The LED tube will provide instant, full brightness without any warm-up time or flickering.
- On/Off Operasyon: Use the wall switch connected to the fixture to control the light.
- Ki pa dimmable: This product is not compatible with dimmers. Attempting to use it with a dimmer may damage the tube or the ballast.
- Pèfòmans optimal: Designed for general illumination in offices, garages, workspaces, warehouses, and similar environments.
Antretyen
The Feit Electric LED T8 Linear Tube Light requires minimal maintenance due to its long lifespan and durable construction.
- Netwayaj: Ensure the power is off before cleaning. Wipe the tube with a soft, dry, or slightly damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
- Ranplasman: With a 50,000-hour lifespan, frequent replacement is not necessary. When replacement is required, follow the installation steps in reverse.
- Dispozisyon: These tubes are mercury-free and can be disposed of safely according to local regulations.
Depanaj
If you encounter issues with your Feit Electric LED T8 Linear Tube Light, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. |
|
|
| Light flickers or strobes. |
|
|
| Limyè fèb. |
|
|
Espesifikasyon
| Atribi | Valè |
|---|---|
| Nimewo Modèl | T24/840/LEDG2/RP/12 |
| Kalite limyè | dirije |
| Wattage | 10 Watt (Ekivalan 20W) |
| Voltage | 120 Volts |
| Klète | 800 Lumen |
| Tanperati Koulè | 4000K Cool White |
| Gwosè fòm anpoul | T8 |
| Baz anpoul | G13 |
| Mwayèn lavi | 50,000 èdtan |
| Karakteristik espesyal | Energy Efficient, Flicker-Free, Frosted, Long Lasting |
| Konpatibilite | Most Magnetic/Electronic Ballasts (Type A) |
| Dimansyon | 2ft Length (approx. 1" diameter) |
| Materyèl | Glass |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
Garanti
Feit Electric provides a 1-ane garanti on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.
Sipò pou Kliyan
For 24/7 customer support, technical assistance, or warranty inquiries, please visit the Feit Electric help center or contact us directly:
- Sant Èd sou Entènèt: help.feit.com
- Telefòn: Refer to the Feit Electric websit pou nimewo kontak aktyèl yo.
Image: A visual representation of Feit Electric's 24/7 customer support, directing users to their online help center at feit.com/help via text and a QR code.
