Manyèl Enstriksyon pou Kapo Tiwa Klarstein Ventimate 60cm

1. Entwodiksyon

Thank you for choosing the Klarstein Ventimate 60cm Drawer Hood. This appliance is designed to efficiently remove cooking odors and steam from your kitchen, ensuring a fresh and clean environment. Featuring a modern touch control panel, three fan speeds, and versatile operation modes (extraction or recirculation), this hood combines performance with user-friendly design. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance.

2. Enstriksyon Sekirite

To prevent personal injury or damage to the appliance, please observe the following safety precautions:

• Asire ke ekipman pou pouvwa a matche ak voltage espesifye sou etikèt evalyasyon an.
• Enstalasyon an dwe fèt pa yon teknisyen kalifye dapre règleman lokal yo.
• Do not operate the hood if the power cord or plug is damaged.
• Toujou dekonekte aparèy la nan ekipman pou pouvwa a anvan w netwaye oswa antretyen.
• Maintain a minimum distance between the hood and the cooking surface as specified in the installation section.
• Netwaye filtè grès yo regilyèman pou anpeche danje dife.
• Pa flambe anba hotte a.
• Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te ba yo sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo.
• Asire w ke gen bon vantilasyon nan chanm nan lè w ap itilize kapo a an menm tan ak aparèy ki boule gaz oswa lòt konbistib.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje:

• Klarstein Ventimate Drawer Hood unit
• Filtè grès aliminyòm (yo)
• Carbon odor filter(s) (for recirculation mode)
• Mounting hardware (screws, brackets, etc.)
• Manyèl Enstriksyon

4. Espesifikasyon teknik

5. Enstalasyon

The Klarstein Ventimate drawer hood is designed for integration into a 60cm wide kitchen cabinet. Careful measurement is crucial for proper fit. Due to the precise dimensions, ensure your cabinet's internal width accommodates the hood without obstruction. If you are unsure about the installation process, it is recommended to consult a professional installer.

5.1 Monte kapo a

1. Prepare Kabinè a: Ensure the cabinet opening is correctly sized for the hood (approx. 59.8 cm width).
2. Detèmine wotè enstalasyon an: For optimal performance, the hood should be installed at a specific distance above the cooking surface. A common recommendation is 60-65 cm (23.6-25.6 inches) above electric hobs and 65-75 cm (25.6-29.5 inches) above gas hobs. Installing too high may reduce extraction efficiency.
3. Fikse kapo a: Insert the hood into the cabinet opening. Use the provided mounting hardware to secure the hood firmly to the cabinet structure. Refer to the detailed diagrams in the printed manual for specific screw locations and bracket usage.
4. Connect Ducting (Extraction Mode): If using extraction mode, connect appropriate ducting (not included) from the hood's outlet to an external vent. Ensure the ducting is as short and straight as possible for maximum efficiency.
5. Install Carbon Filters (Recirculation Mode): If using recirculation mode, ensure the carbon filters are correctly installed. These filters purify the air before returning it to the kitchen.
6. Koneksyon elektrik: Connect the hood to a suitable power outlet. Ensure the connection is secure and meets all electrical safety standards.

Nòt enpòtan: Some users have reported challenges with cabinet fit and securing the hood. Double-check all measurements and ensure the hood is stable before final use. The provided instructions for securing the hood may require careful attention to detail.

This image displays the Klarstein Ventimate 60cm drawer hood in black, viewed from below and slightly to the side. The extendable panel is pulled out, revealing the touch control interface with illuminated symbols for power, fan speed, and lighting. The LED lights are visible on the underside of the hood, and the metallic grease filter is partially visible behind the panel.

6. Operasyon

The Klarstein Ventimate hood features an intuitive touch control panel located on the extendable front flap.

6.1 Fonksyon debaz

• Extend the Flap: Gently pull the front panel of the hood outwards to activate the appliance and reveal the touch controls.
• Limen/Etenyen: Touche senbòl pouvwa a (O) pou limen oswa etenn kapo a.
• Ajisteman vitès fanatik: Use the '+' and '-' symbols to cycle through the three available fan speeds (1, 2, 3). The current speed will be displayed.
• Dirije ekleraj: Touch the light bulb symbol (💡) to turn the integrated LED lighting on or off. The 6500K LED lights provide clear illumination of your cooking area.
• Retract the Flap: Push the front panel back into the cabinet to turn off the hood and conceal the controls.

7. Antretyen

Regular maintenance ensures optimal performance and extends the lifespan of your hood.

7.1 Netwaye Filtè Grès yo

The aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain extraction efficiency.

1. Dekonekte pouvwa: Always switch off and unplug the hood before cleaning.
2. Retire filtè yo: Locate the release latches on the grease filters and carefully remove them.
3. Netwaye Filtè: The aluminum grease filters are dishwasher-safe. Alternatively, wash them by hand in hot water with a mild detergent. Rinse thoroughly and allow them to dry completely before reinstallation.
4. Re-enstale filtè yo: Insert the dry filters back into their slots, ensuring they click securely into place.

7.2 Replacing Carbon Odor Filters (Recirculation Mode)

If your hood is operating in recirculation mode, the carbon odor filters need to be replaced periodically (typically every 3-6 months, depending on usage and cooking habits). These filters cannot be washed.

1. Dekonekte pouvwa: Switch off and unplug the hood.
2. Retire filtè grès yo: Follow the steps above to remove the aluminum grease filters.
3. Remove Old Carbon Filters: The carbon filters are usually attached to the motor housing. Follow the specific instructions in your printed manual to detach them.
4. Install New Carbon Filters: Attach the new carbon filters, ensuring they are securely fitted.
5. Re-enstale filtè grès yo: Place the aluminum grease filters back into position.

7.3 Netwaye Eksteryè a

Siye sifas ekstèn kapo a ak yon twal mouampened with mild detergent. Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.

NAN. Depanaj

Anvan ou kontakte sèvis kliyan, tanpri tcheke pwoblèm komen sa yo:

9. Garanti ak sipò

Klarstein products are manufactured with quality and reliability in mind. For warranty information, please refer to the warranty card included with your purchase or visit the official Klarstein website. If you encounter any issues that cannot be resolved using the troubleshooting guide, or require spare parts, please contact Klarstein customer support or your authorized dealer for assistance.

Manifakti: Klarstein

Websit: www.klarstein.com