Manyèl Enstriksyon SwitchBot Smart Relay Switch 1 (pakè 4)

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SwitchBot Smart Relay Switch 1 (4-pack). This smart relay module is designed to integrate existing electrical appliances and lighting into your smart home ecosystem, offering remote control and automation capabilities through Wi-Fi and Bluetooth connectivity. It features a built-in Bluetooth repeater and supports various smart home platforms including Matter, Alexa, Apple Home, and Google Home.

Image 1.1: The SwitchBot Smart Relay Switch 1 (4-pack) modules and retail packaging.

2. Pwodwi souview

2.1 Karakteristik kle

• Matter-Compatible: Supports Apple Home (Matter Network required), Alexa, Google Home, and SmartThings (compatible speaker required) for direct appliance control.
• Integrated Gateway: Connects with other smart devices from various brands.
• Entegrasyon fasil: Compact design (1.65 x 1.45 x 0.63 inches) fits most switch boxes and outlets without extensive rewiring.
• Enstalasyon rapid: Approximately 10-minute installation for remote control and automation of lights, fans, heating, and air conditioning.
• Opsyon kontwòl miltip: Wi-Fi for remote control, Bluetooth for local control when internet is unavailable, and voice control via Matter Protocol.
• Custom Smart Scenes: Automate actions like turning on lights with door opening or motion detection (requires SwitchBot Sensor), or scheduled light control.
• Environmental Automation: Pair with SwitchBot Meter for weather-based automation, such as garden irrigation based on temperature and humidity.
• Karakteristik sekirite: V0 flameproof casing and over-temperature protection for power cut-off during emergencies.
• Memwa Power-Off: Restores to its previous state after a power outage.
• Pèfòmans Amelyore: Equipped with an ESP32 processor for improved communication, data transmission, and smart control efficiency.

2.2 Kontni pake a

• SwitchBot Smart Relay Switch 1 (4 units)
• Manyèl Enstriksyon

3. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan enstalasyon ak itilizasyon. Si ou pa swiv enstriksyon sa yo, ou ka pran chòk elektrik, pran dife oswa pran lòt danje.

• Sekirite elektrik: Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring. Always turn off power at the circuit breaker before installing, removing, or servicing the device.
• Voltage konpatibilite: Asire w ke volim aparèy latage and current ratings match your electrical system.
• Itilize andedan kay la sèlman: This device is intended for indoor use in dry locations. Do not expose to water or moisture.
• Pwoteksyon Surcharge: Pa depase chaj maksimòm 16 la. Amps for AC 100-240V or 10 Amps for DC 10-30V.
• Fil elektrik apwopriye: Ensure all wire connections are secure and correctly terminated according to the wiring diagram. A neutral wire is required for AC installations.
• Timoun ak bèt kay: Kenbe aparèy la ak konpozan li yo lwen timoun ak bèt kay.

4. Espesifikasyon

Image 4.1: Dimensions of the SwitchBot Smart Relay Switch 1, showing its compact size.

5. Enstalasyon

5.1 Enstalasyon elektrik

1. Pouvwa Off: Before beginning any electrical work, ensure the power to the circuit is turned off at the main circuit breaker. Verify with a voltage tèsteur.
2. Idantifye fil yo: Locate the live (L), neutral (N), and switch wires (SW) in your switch box or outlet. A neutral wire is required for AC installations.
3. Konekte fil yo: Connect the wires to the corresponding terminals on the SwitchBot Smart Relay Switch 1. Refer to the wiring diagram printed on the device for correct connections. Ensure all connections are secure.
4. Aparèy Monte: Carefully place the compact relay switch into the switch box or outlet.
5. Retabli pouvwa: Yon fwa enstalasyon an fini epi tout koneksyon yo byen fèm, retabli kouran an nan disjonktè a.

Imaj 5.1: Egzanpample installation of the SwitchBot Smart Relay Switch 1 within a standard wall switch box.

5.2 App and Smart Home Integration

1. Telechaje App: Download the SwitchBot app from your device's app store.
2. Ajoute Aparèy: Open the SwitchBot app, create an account or log in, and follow the on-screen instructions to add the Smart Relay Switch 1.
3. Konekte ak Wi-Fi: During the setup process, connect the device to your 2.4GHz Wi-Fi network.
4. Entegrasyon Matyè: For Matter compatibility with platforms like Apple Home, Alexa, Google Home, or SmartThings, ensure you have a compatible Matter controller (hub/speaker). Follow the specific pairing instructions provided by your Matter controller's app.
5. Enstalasyon asistan vwa: Once integrated with your smart home platform, you can enable voice control through Alexa, Google Assistant, or Siri Shortcuts.

Image 5.2: The SwitchBot Smart Relay Switch 1 integrates with major smart home platforms.

6. Opere

6.1 Opsyon kontwòl

• Aplikasyon Smartphone: Control connected appliances remotely via the SwitchBot app over Wi-Fi.
• Kontwòl Bluetooth: If internet connectivity is lost, the device can still be controlled locally via Bluetooth using the SwitchBot app.
• Kontwòl vwa: Use voice commands through Alexa, Google Assistant, or Apple Home (via Matter) for hands-free operation.
• Physical Switch: The existing physical wall switch connected to the relay will continue to function normally.

Image 6.1: Voice control allows for convenient, hands-free operation of connected devices.

6.2 Automation and Smart Scenes

• Orè Custom: Set specific times for appliances to turn on or off using the SwitchBot app's scheduling feature.
• Sèn Entelijan: Create automated routines by pairing the Relay Switch 1 with other SwitchBot sensors (e.g., Contact Sensor, Motion Sensor) to trigger actions based on events like door opening or motion detection.
• Environmental Automation: Integrate with SwitchBot Meter devices to automate tasks such as garden irrigation based on real-time temperature and humidity data.

Image 6.2: Automatic lighting can be set up using SwitchBot sensors and the Relay Switch 1.

Image 6.3: Weather-based watering systems can be automated with the SwitchBot Outdoor Meter.

6.3 Bluetooth Repeater Function

The SwitchBot Smart Relay Switch 1 acts as a Bluetooth repeater, extending the range and reliability of your SwitchBot Bluetooth sub-devices. When paired with a SwitchBot Hub, it can automatically scan nearby Bluetooth devices, allowing you to remotely view and operate them, and integrate them into automation routines.

Image 6.4: The Relay Switch 1 extends Bluetooth connectivity for other SwitchBot devices.

6.4 Dry Contact Applications

The device supports dry contact functionality, making it compatible with low-voltage devices such as garage door openers, doorbells, and other systems that require a simple contact closure.

Image 6.5: The Relay Switch 1 can be used for dry contact applications like garage doors and doorbells.

7. Antretyen

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye aparèy la. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.
• Mizajou mikrolojisyèl: Periodically check the SwitchBot app for available firmware updates to ensure optimal performance and access to new features.
• Kondisyon anviwònman: Asire w ke aparèy la ap fonksyone nan limit tanperati ak imidite espesifye yo pou anpeche domaj.

NAN. Depanaj

• Aparèy pa reponn:
  • Tcheke si aparèy la gen kouran.
  • Verify Wi-Fi connectivity in the SwitchBot app.
  • Ensure your smartphone's Bluetooth is enabled for local control.
  • Restart the device by cycling power at the circuit breaker.
• Difficulty with Matter Integration:
  • Ensure you have a compatible Matter controller (hub/speaker) and it is online.
  • Follow the specific pairing instructions for your Matter controller's app carefully.
  • Ensure the device is within range of your Matter controller.
• Koneksyon tanzantan:
  • Ensure the device is within range of your Wi-Fi router or SwitchBot Hub (if used as a Bluetooth repeater).
  • Minimize entèferans ki soti nan lòt aparèy elektwonik yo.
  • Konfime ke rezo Wi-Fi ou a se 2.4GHz.
• Switch Wires (SW) Triggering Unexpectedly:
  • Ensure the SW wires are properly isolated to prevent phantom voltage/current from triggering the switch sensor.
  • Keep SW wires as short as possible.
  • If multiple switches are in the same gang box, ensure the relay is not too close to other switches.
• 24V Power Supply Issues:
  • While the device supports 24V DC, some users have reported better performance with 120V AC. Verify your power supply meets the device's requirements and provides stable voltage.

9. Garanti ak sipò

SwitchBot provides a limited warranty for its products. For detailed warranty information, technical support, or to contact customer service, please visit the official SwitchBot websit la oubyen gade kat garanti ki vini ak acha ou a.

Official SwitchBot Store: SwitchBot Amazon Store