Entwodiksyon
Thank you for choosing the EverBrite Rechargeable Underhood Work Light. This manual provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.
Image: The EverBrite Rechargeable Underhood Work Light, showing its flexible light strip and magnetic ends with adjustable straps.
Karakteristik pwodwi
- Twa mòd ekleraj: High, Medium, and Low settings to adapt to various lighting requirements.
- USB-C chaj rapid: Equipped with two USB-C charging ports and LED indicators (red for charging, green for full charge).
- Magnetic Base Design: Integrated magnets allow secure attachment to metal surfaces for hands-free operation.
- Adjustable Elastic Strap: Durable nylon strap designed to fit vehicle hoods from 52 to 75 inches wide, providing a secure and flexible fit.
- Dual Hooks: Sturdy hooks on both ends offer additional stability and mounting options.
Ki sa ki nan bwat la
- EverBrite Rechargeable Underhood Work Light (Model E111014AE)
- USB-C Chaje Kab
- Manyèl Enstriksyon
Image: Diagram showing the light strip, switch button, magnetic base, charging port, charging indicator, adjustable strap, and hook components.
Enstalasyon ak Enstalasyon
- Prepare the Light: Unfold the work light. Ensure the elastic straps are properly attached to the magnetic ends.
- Position on Hood: Open the vehicle's hood. Place the magnetic ends of the light onto the metal frame of the hood. The magnets will securely hold the light in place.
- Tache ak espageti: Extend the adjustable elastic straps over the hood. Hook the ends of the straps onto suitable points on the hood or vehicle frame to provide additional stability and prevent accidental dislodgement. Adjust the strap length to ensure a snug fit across the hood (compatible with hoods 52 to 75 inches wide).
- Ajiste Direksyon Limyè: The flexible light strip can be bent and angled to direct illumination precisely where needed within the engine bay.
Image: The EverBrite work light installed under a car hood, illuminating the engine bay. The adjustable straps are visible.
Imaj: Gwo plan view of the hanging hooks on the EverBrite work light, designed for securing the fixture.
Image: The magnetic base of the EverBrite work light attached to a metal pegboard, demonstrating its hands-free capability.
Enstriksyon Operasyon
- Limen/Etenyen: Short press the switch button located on either end of the light to turn it ON.
- Fè sik atravè mòd: Once ON, short press the switch button repeatedly to cycle through the three lighting modes: High, Medium, Low, and then OFF.
- Mode Sequence: High Brightness → Medium Brightness → Low Brightness → OFF.
Image: The EverBrite work light displaying its three distinct lighting modes: Low (200LM, 14H), Medium (400LM, 6H), and High (900LM, 3.5H).
Videyo: Yon finiview of the EverBrite Rechargeable Underhood Work Light, demonstrating its features and operation.
Chaje Enstriksyon yo
- Konekte Charger: Locate the USB-C charging port on the side of the light. Open the protective cover and insert the provided USB-C cable.
- Siveye eta chaje: An LED indicator will illuminate red to show that the device is charging.
- Endikasyon plen chaj: The LED indicator will turn green when the battery is fully charged. A full charge typically takes approximately 2 hours.
- Dekonekte: Once fully charged, disconnect the USB-C cable and close the protective cover to maintain water resistance.
Atansyon: Do not operate the light while it is charging.
Image: Close-up of the EverBrite work light showing the USB-C charging port and the red/green LED charging indicators.
Antretyen
- Netwayaj: Siye limyè a ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Depo: Store the work light in a cool, dry place away from direct sunlight when not in use.
- Swen batri: To prolong battery life, charge the device fully before long-term storage and recharge every 3-6 months.
Depanaj
- Limyè pa limen:
- Asire w batri a chaje. Konekte l nan yon sous kouran epi tcheke endikatè chaj la.
- Peze bouton pouvwa a byen fèm.
- Light Not Holding Charge:
- Verifye kab chaje a ak adaptè a ap fonksyone byen.
- Asire w ke pò chaj la pwòp epi li pa gen debri.
- Magnets Not Holding Securely:
- Ensure the surface is clean and metallic.
- Use the adjustable straps and hooks for additional support, especially on uneven or painted surfaces.
Espesifikasyon
| Paramèt | Valè |
|---|---|
| Sous pouvwa | Lityòm Ion batri |
| Kapasite batri | 2200mAh |
| Maksimòm Klate | 1000LM |
| Max Running Time (Low Mode) | Jiska 14 èdtan |
| Max Running Time (High Mode) | Jiska 3.5 èdtan |
| Pwa | 10.9 ons (310g) |
| Dimansyon | 8.66 x 4.72 x 2.05 inches (1400*40*32MM) |
| Distans Maksimòm Gwo bout bwa | 40M |
| Port chaje | USB-C (2 pò) |
| Hood Compatibility | 52 to 75 inches wide |
Enfòmasyon sou Sekirite
- Do not look directly into the light source when operating on high brightness to avoid eye strain.
- Kenbe soti nan atenn timoun yo.
- Pa demonte oswa modifye pwodwi a.
- Avoid exposing the product to extreme temperatures or direct flame.
- Asire w kouvèti pò chaje a byen fèmen lè w pa ap chaje pou kenbe rezistans dlo a.
Garanti ak sipò
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EverBrite websit.
