HTVRONT Auto Heat Press 2 User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the safe and efficient operation of your HTVRONT Auto Heat Press 2. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Si ou pa swiv enstriksyon sekirite sa yo, sa ka lakòz dife, chòk elektrik, oswa lòt blesi oswa domaj.

Toujou opere près chalè a sou yon sifas ki estab epi ki reziste chalè.
Keep hands and fingers clear of the heating plate during operation to avoid burns.
Pa plonje machin nan nan dlo oswa nan lòt likid.
Asire w ke kòd kouran an pa domaje epi li byen branche nan yon priz ki gen tè.
Deploge machin nan lè li pa itilize oswa anvan w netwaye.
Pa kite machin nan poukont li pandan operasyon an.
The machine features an automatic shut-off function after 15 minutes of inactivity to prevent overheating.
Kenbe soti nan atenn timoun yo.

3. Pwodwi souview

The HTVRONT Auto Heat Press 2 is designed for efficient and precise heat transfer applications. Familiarize yourself with its main components:

HTVRONT Auto Heat Press 2 main unit — Figure 3.1: Main unit of the HTVRONT Auto Heat Press 2. This image displays the overall design of the heat press, featuring the top heating plate, the lower ironing board, and the control panel with an adjustable screen.

HTVRONT Auto Heat Press 2 labeled components — Figure 3.2: Labeled components of the HTVRONT Auto Heat Press 2. This diagram highlights key parts including the LED screen, control buttons, heat plate, ironing board, and base, along with overall dimensions.

Plak chalè: The upper heating element that applies heat and pressure.
Ironing Board (Lower Platen): The surface where materials are placed for pressing. Features a fully pull-out drawer design.
Baz: Provides stability for the machine.
Dirije ekran: Displays temperature, time, and pressure settings.
Bouton kontwòl: Used to adjust settings and initiate operations.

4. Enstalasyon

Follow these steps to set up your HTVRONT Auto Heat Press 2 for first use:

Depake machin nan: Carefully remove the heat press from its packaging. Retain all packaging materials for potential future transport or storage.
Plasman: Place the machine on a flat, stable, and heat-resistant surface. Ensure there is adequate clearance around the machine for ventilation and safe operation.
Koneksyon pouvwa: Connect the power cord to the machine and then plug it into a standard 110V (DC) grounded electrical outlet.
Premye pouvwa sou: Press the power button to turn on the machine. The LED screen will illuminate.

Quick Start Guide for HTVRONT Auto Heat Press 2 — Figure 4.1: Quick start guide illustrating the four basic steps for operating the heat press: powering on, setting parameters, placing materials, and initiating the press.

5. Operasyon Enstriksyon

5.1. Powering On / Off

Pou pouvwa sou, peze bouton pouvwa a.
To power off, press and hold the power button until the screen turns off.

5.2. Setting Parameters (Temperature, Time, Pressure)

The HTVRONT Auto Heat Press 2 allows for precise control over temperature, time, and pressure to suit various materials and transfer types.

Ranje Tanperati: 210°F - 410°F (100°C - 210°C)
Tan Range: 1 - 999 segonn
Ranje presyon: 50 - 170 LB (adjustable)

Heat press control panel with temperature, time, and pressure settings — Figure 5.1: Control panel displaying temperature, time, and pressure settings. The image also highlights preset and custom modes for efficient use.

Use the control buttons on the LED screen to adjust these settings. The machine heats up quickly, reaching 410°F within 5 minutes and 30 seconds.

Adjustable pressure feature of the heat press — Figure 5.2: Illustration of the adjustable pressure feature, showing pressure levels from 50LB to 170LB, suitable for various heat transfer materials like DTF, Sublimation Paper, and HTV.

5.3. Automatic Pressing Cycle

Once parameters are set and the material is in place, the automatic pressing function simplifies operation:

Place your substrate and transfer material on the ironing board.
Press the "R" button to initiate the automatic pressing cycle. The heat plate will descend and apply pressure.
The machine will buzz when the set time is complete and automatically release the heat plate.

Automatic ironing and releasing function of the heat press — Figure 5.3: Depiction of the automatic ironing and releasing mechanism, highlighting hands-free operation and enhanced user safety.

5.4. Using the Fully Pull-out Drawer

The ironing board features a fully pull-out drawer, allowing for safe and easy placement of materials without contact with the hot heat plate.

Pull the drawer completely out before placing or adjusting your items.
Push the drawer back in before starting the pressing cycle.

5.5. Adjusting Screen Angle

The LED screen can be adjusted to 7 levels within a 0-75° range for improved visibility and ergonomic comfort during operation.

Angle-adjustable screen and fully pull-out drawer features — Figure 5.4: Demonstrates the angle-adjustable screen (0-75°) and the fully pull-out drawer, designed for user comfort and convenience.

5.6. Material Compatibility and Higher Heating Height

The HTVRONT Auto Heat Press 2 is compatible with various heat transfer materials and features an increased heating height for thicker items.

Materyèl konpatib: HTV (Heat Transfer Vinyl), Sublimation Paper, DTF (Direct to Film), Heat Transfer Paper, Puff Heat Transfer Vinyl, Glitter Heat Transfer Vinyl.
Increased Heating Height: Up to 4.5 cm (1.77 inches), allowing for pressing on thicker items such as hoodies, canvas bags, and pillows, in addition to t-shirts.

Increased heating height for various materials — Figure 5.5: Illustrates the increased heating height of 1.77 inches (4.5 cm), demonstrating its capability to press both thin items like t-shirts and thicker items like hoodies.

Examples of items that can be pressed with the HTVRONT Auto Heat Press 2 — Figi 5.6: Egzamples of various items suitable for heat pressing, including t-shirts, sublimation blanks, pillows, canvas bags, socks, and hoodies.

Types of heat transfer materials compatible with the HTVRONT Auto Heat Press 2 — Figure 5.7: Various heat transfer materials compatible with the machine, such as Puff Heat Transfer Vinyl, DTF, Heat Transfer Paper, Sublimation Paper, and Glitter Heat Transfer Vinyl.

6. Antretyen

Bon antretyen asire lonjevite ak pèfòmans optimal près chalè ou a.

Netwayaj Plak Chalè a: Allow the machine to cool completely. Use a soft, damp cloth to wipe the heat plate. For stubborn residue, a specialized heat press cleaner can be used, following the cleaner's instructions. Avoid abrasive materials.
Cleaning the Ironing Board: Wipe the ironing board with a damp twal. Asire w ke li sèk anvan pwochen itilizasyon.
Netwayaj jeneral: Siye deyò machin nan avèk yon twal mou epi sèk.
Depo: Sere près chalè a nan yon anviwònman sèk epi san pousyè lè w pa ap itilize li.

NAN. Depanaj

If you encounter issues with your HTVRONT Auto Heat Press 2, refer to the following common troubleshooting steps:

Pwoblèm	Kòz posib	Solisyon
Machin nan pa limen.	Kòd kouran an pa byen konekte; pwoblèm ak priz kouran an.	Ensure the power cord is securely plugged into both the machine and a working grounded outlet. Test the outlet with another device.
Machin nan pa chofe.	Temperature not set; machine in standby mode.	Verify temperature settings on the LED screen. Allow sufficient time for preheating. If the machine has been idle for 15 minutes, it may have entered auto shut-off mode; power cycle the machine.
Uneven heat transfer results.	Incorrect pressure; uneven material placement; faulty transfer material.	Adjust pressure settings as needed (50-170 LB). Ensure material is laid flat and evenly. Test with new transfer material.
Automatic press not engaging/releasing.	"R" button not pressed; obstruction.	Ensure the "R" button is pressed firmly. Check for any obstructions preventing the heat plate from moving freely.

If the problem persists after attempting these solutions, please refer to the support section for further assistance.

8. Espesifikasyon

Karakteristik	Detay
Nimewo Modèl	SG-RYJ-0521-US
Gwosè Plak Chalè	15 x 15 pous (38.1 x 38.1 cm)
Ranje Tanperati	210°F - 410°F (100°C - 210°C)
Tan Range	1 - 999 segonn
Ranje presyon	50 - 170 LB
Increased Heating Height	Jiska 4.5 cm (1.77 pous)
Pouvwa	1500W
Antre Voltage	110 Vòlt (DC)
Pwa atik	47.4 liv (21.54 kg)
Dimansyon pwodwi	Apeprè 20.9"L x 17.1"W x 13"H
Auto fèmen	Apre 15 minit inaktivite
Ajisteman Ang Ekran	0-75 degre

9. Garanti ak sipò

For warranty information, please refer to the documentation included with your purchase or visit the official HTVRONT website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact HTVRONT customer service through their official channels. Details can typically be found on the manufacturer's websit entènèt la oswa platfòm acha ou a.

Note: The manufacturer is committed to providing support; however, specific contact methods may vary. Always check the latest information on the official HTVRONT websit.

	Machin pou fè près chalè HTVRONT HPM10-2 10"x10" - Gid pou itilizatè ak espesifikasyon Gid konplè pou machin près chalè HTVRONT HPM10-2 10"x10", ki kouvri garanti, operasyon, enstriksyon sekirite, ak espesifikasyon materyèl pou pwojè transfè chalè.
	HTVRONT A300 Auto Hat Heat Press User Manual User manual for the HTVRONT A300 Auto Hat Heat Press, providing instructions, specifications, and troubleshooting for heat transfer applications.
	HTVRONT A200 Auto Tumbler Heat Press User Manual Comprehensive user manual for the HTVRONT A200 Auto Tumbler Heat Press, covering device overview, button details, functions, usage instructions, specifications, maintenance, and warranty information.
	HTVRONT Manyèl Chalè Chapèl: Gid Itilizatè ak Enstriksyon Manyèl itilizatè konplè pou HTVRONT Manual Hat Heat Press la, ki kouvri konfigirasyon, operasyon, fonksyon, espesifikasyon, depanaj, ak prekosyon sekirite pou rezilta transfè chalè optimal.
	HTVRONT Tumbler Heat Press: Gid etap pa etap Yon gid etap pa etap pou itilize près chalè HTVRONT pou siblime vè, ki kouvri enprime desen, preparasyon, operasyon machin, ak fini.
	Manyèl Itilizatè pou Chalè Près pou Kouvèti Telefòn HTVRONT: Enstalasyon, Operasyon, ak Espesifikasyon Manyèl itilizatè konplè pou près chalè pou kouvèti telefòn HTVRONT (Modèl HPX01). Li bay enstriksyon detaye pou konfigirasyon, operasyon, depanaj ak antretyen. Aprann kijan pou siblime kouvèti telefòn, badj ak lòt atik ak près chalè sa a. Li gen ladan espesifikasyon ak enfòmasyon sou garanti.

HTVRONT SG-RYJ-0521-US