RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Pwodwi souview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Figi 1.1: Plis paseview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Enfòmasyon sou Sekirite

• AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan fizib la oswa disjonktè a anvan enstalasyon oswa antretyen.
• Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik nasyonal ak lokal yo.
• Asire rezèv la voltage is correct for the fixture (120-277V).
• Pa manyen aparèy ki anba kouran an ak men mouye.
• Pa enstale tou pre materyèl ki ka pran dife.
• Aparèy sa a fèt pou itilizasyon andedan kay la sèlman.

3. Enstalasyon ak Enstalasyon

3.1. Pre-Enstalasyon

• Depake aparèy la epi enspekte li pou wè si li pa domaje.
• Ensure all necessary components are present (LED Fixture).
• Koupe kouran an nan disjonktè a anvan ou kòmanse enstalasyon an.

3.2. Monte aparèy la

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Figi 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Fil elektrik

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Figi 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Operasyon Enstriksyon

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Figi 4.1: Fèmen view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Chwazi youn nan paramèt sa yo: 40W, 50W, oswa 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Chwazi youn nan paramèt sa yo: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Dimmable Functionality

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Antretyen

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Netwayaj: Dekonekte kouran an anvan ou netwaye. Sèvi ak yon twal mou, sèk oswa yon ti kras mouye.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents.
• Poul: The integrated LED light source is designed for long life and does not require replacement.

NAN. Depanaj

If the fixture is not operating as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Espesifikasyon

8. Enfòmasyon sou Garanti

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou pou reklamasyon garanti.

9. Sipò pou Kliyan

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Websit: www.rablighting.com
• Gade nan website for current contact information, including phone numbers and email support.