BETAFPV Air 5IN1 Brushless Flight Controller 1S AIO FC Instruction Manual

1. Entwodiksyon

The BETAFPV Air 5IN1 Brushless Flight Controller is a lightweight, high-performance 1S All-In-One (AIO) flight controller designed for FPV Whoop Quadcopters. It integrates a G473 CPU, 16MB BlackBox, BB51 Bluejay 96K ESC, OSD Chip, and a built-in Serial ELRS 2.4G receiver. This manual provides essential information for the proper setup, operation, and maintenance of your flight controller.

2. Pake kontni

Please verify all items are present upon unboxing. The package includes:

• 1 * Air Brushless Flight Controller
• 1 * 2.4g Antenna (Only 5IN1 Version)
• 1 * Type-C to SH1.0 Adapter
• 1 * SH1.0 4Pin Adapter Cable
• 1 * 5.8g VTX Antenna
• 1 * BT2.0 U Whoop Cable Pigtail | 40mm
• 4 * M1.4*4 Self-tapping Screws
• 4 * Shock Absorbing Ball

Image: Contents of the BETAFPV Air 5IN1 Brushless Flight Controller package.

3. Espesifikasyon

Flight Controller (FC) Specifications:

• Pwa: 3.6g (5IN1 Version)
• Gwosè twou pou monte: 26mm x 26mm
• CPU: STM32G473CEU6 (168MHz)
• Six-Axis: ICM42688P (SPI connection)
• Blackbox Memory: 16MB
• 5V BEC: 5V 3A
• Pò USB: SH1.0 4-Pin
• RX: Serial ELRS 2.4G (V3.4.3) (Only 5IN1 Version)
• 5IN1 Version: FC+ESC+OSD+VTX+RX

Video Transmitter (VTX) Specifications:

• Sòti pouvwa: 25/100/200/400/PIT
• Frekans: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
• Kontwòl frekans: PLL
• All Harmonic: Maksimòm -50dBm
• Estabilite frekans: ±100KHz (Typ.)
• Frequency Precision: ±200KHz (Typ.)
• Channel Carrier Error: ± 1.5dB
• Pò antèn: 50 Ω
• Tanperati operasyon: -10 ° C ~ + 80 ° C

Image: The BETAFPV Air 5IN1 Flight Controller on a digital scale, displaying its lightweight design at 3.59 grams.

4. Enstalasyon ak Enstalasyon

The Air 5IN1 FC is designed for advanced pilots due to its compact and integrated nature. Careful handling and precise connections are crucial.

4.1 Konpozan Plis paseview

Imaj: Anlè view of the BETAFPV Air 5IN1 Flight Controller, showing the main components and layout.

Imaj: Anba view of the BETAFPV Air 5IN1 Flight Controller, highlighting solder pads and connectors.

4.2 Konfigirasyon pò

The UART2 port is connected with the VTX by default. This flight controller also provides 3 complete full-featured serial ports for external CRSF/SBUS receivers, GPS, HD VTX, or other serial devices. Refer to the diagram below for port details.

Image: Diagram illustrating the UART port connections and configuration options for the flight controller.

4.3 Detailed Component Labels

Image: Detailed labeled top view of the BETAFPV Air 5IN1 Flight Controller, identifying key chips and connection points.

Image: Detailed labeled bottom view of the BETAFPV Air 5IN1 Flight Controller, showing ESCs, OSD, and USB connections.

4.4 Gid Videyo Enstalasyon

For a visual guide on installing a flight controller into a drone, please refer to the following official BETAFPV video. While this video demonstrates installation for a Meteor series drone, the general principles for connecting the flight controller and VTX module are applicable.

5. Gid pou opere

5.1 VTX Power Settings

The integrated onboard VTX allows power adjustment from 25mW to 400mW. Higher VTX power consumes more energy and generates more heat, which can reduce flight time. For optimal flight time in indoor environments, it is recommended to use 25mW to 100mW power settings.

5.2 Obligasyon Reseptè

The Air 5IN1 Brushless Flight Controller integrates a Serial ELRS 2.4G RX with default protocol ELRS and firmware version V3.4.3. Ensure that your binding device (e.g., radio transmitter) uses the same protocol and firmware version for successful binding.

6. Antretyen

Regular maintenance ensures the longevity and performance of your flight controller.

• Enspeksyon fizik: Periodically check all solder joints and connections for any signs of damage or loose contacts.
• Jesyon kab: Ensure all cables, especially coaxial cables and antenna wires, are properly secured and not under tension to prevent damage.
• Lapwòpte: Keep the flight controller free from dust, dirt, and moisture. Use a soft brush or compressed air for cleaning.

NAN. Depanaj

Si ou rankontre pwoblèm, konsidere etap depanaj komen sa yo:

• Pa gen pouvwa: Check battery connection and ensure the correct polarity. Verify the flight controller receives power.
• Pwoblèm obligatwa: Confirm that your transmitter and the FC's ELRS receiver are on the same protocol and firmware version. Re-attempt the binding process as per ELRS documentation.
• VTX Signal Problems: Ensure the VTX antenna is securely connected. Check VTX power settings and frequency for interference.
• Enstabilite vòl: Verify all motors are spinning in the correct direction and propellers are installed correctly. Check for any loose components or damaged wires.

For more complex issues, please refer to the official BETAFPV support resources.

8. Garanti & Sipò

It is recommended to check the package contents immediately upon arrival to ensure everything is in order. For product support, technical assistance, or warranty inquiries, please visit the official BETAFPV store or contact their customer service.

Visit the BETAFPV Store for Support