DARKROCK D240 CPU Liquid Cooler Instruction Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your DARKROCK D240 CPU Liquid Cooler. Please read this guide thoroughly before beginning installation to ensure proper setup and optimal performance. The DARKROCK D240 is an all-in-one (AIO) liquid cooling system designed to efficiently dissipate heat from your CPU, featuring a 240mm radiator, addressable RGB lighting, and a pure copper pump base.

Image: The DARKROCK D240 CPU Liquid Cooler integrated into a computer system, showcasinefè ekleraj RGB li yo.

2. Enstalasyon ak Enstalasyon

2.1 Kontni pake a

Anvan enstalasyon an, verifye si tout konpozan yo prezan nan pake a:

• 1x Radiator with Integrated Pump and Tubing
• 2x 120mm ARGB PWM Cooling Fans
• Intel Mounting Bracket (LGA1851/1700/1200/115X)
• Sipò Montaj AMD (AM5/AM4)
• Plak dèyè pou Socket Intel yo
• Mounting Screws and Standoffs for Intel/AMD
• Paste tèmik
• Vis Fan yo
• 1 to 3 Fan Splitter Cable
• RGB Controller (if included with your model)

Imaj: Yon imaj detaye view of all parts and accessories included in the DARKROCK D240 CPU Liquid Cooler package.

2.2 Etap Pre-Enstalasyon

1. Prepare your Motherboard: Ensure your motherboard is compatible with the cooler. The D240 supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets.
2. Retire ansyen glasyè a: If replacing an existing cooler, carefully remove it and clean any old thermal paste from the CPU surface using isopropyl alcohol.
3. Identify Mounting Hardware: Select the appropriate mounting bracket and screws for your CPU socket type (Intel or AMD).

Image: Visual representation of the cooler's compatibility with various AMD and Intel CPU sockets.

2.3 Mounting the Radiator and Fans

1. Attach the two 120mm fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or side).

Image: Illustration of the 120mm PWM/ARGB cooling fans and the radiator, highlighting their features.

Imaj: Yon gwo plan view of the radiator's fin structure, designed for optimal heat dissipation.

2.4 Installing the Pump Head

1. Aplike yon ti kantite pat tèmik nan sant difizè chalè entegre (IHS) CPU ou a.
2. Attach the correct mounting bracket to the pump head. Ensure the protective film is removed from the copper base before installation.
3. Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs on the motherboard.
4. Secure the pump head with the thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

Image: A visual representation of the pure copper base of the pump and the liquid circulation path.

2.5 Koneksyon fil elektrik

Connect the pump and fan cables to your motherboard or an RGB controller as follows:

• Pouvwa ponp: Connect the pump's 3-pin or 4-pin connector to the dedicated AIO_PUMP or CPU_OPT header on your motherboard.
• Pouvwa fanatik: Connect the fan cables to the 1-to-3 splitter cable, then connect the splitter to a CPU_FAN or SYS_FAN header on your motherboard.
• Ekleraj ARGB: Connect the ARGB cables from the fans and pump head to a 5V 3-pin ARGB header on your motherboard or to the included RGB controller. Ensure correct pin alignment to prevent damage.
• RGB Controller Power: If using an RGB controller, connect it to a SATA power connector from your power supply.

Image: A comprehensive diagram illustrating the electrical connections for the pump, fans, and ARGB lighting.

2.6 Videyo enstalasyon

For a visual guide on the installation process, please refer to the official installation video:

3. Operasyon Enstriksyon

3.1 Premye pouvwa-sou

After completing the installation and wiring, power on your computer. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.

3.2 Kontwòl ekleraj ARGB

The DARKROCK D240 features addressable RGB lights on both the fans and the water-cooling head. These can be controlled via:

• Lojisyèl kat manman: If connected to a compatible 5V 3-pin ARGB header, you can synchronize and customize lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Included RGB Controller: If your model includes a dedicated RGB controller, use its buttons or remote control to cycle through various lighting modes, colors, and effects.

Image: A computer case interior illuminated by the customizable addressable RGB lighting of the DARKROCK D240 cooler and other components.

Image: The RGB controller and its remote, used for adjusting the cooler's lighting effects.

3.3 PWM Smart Control

The adjustable PWM fans (800 RPM - 1800 RPM) automatically adjust their speed based on CPU temperature. This provides efficient cooling when needed and reduces noise during lighter loads. You can often fine-tune fan curves through your motherboard's BIOS settings or dedicated software.

3.4 Videyo Prezantasyon Pwodwi

Observe the DARKROCK D240 in action with its dynamic RGB lighting and cooling capabilities:

4. Antretyen

Antretyen regilye ede asire lonjevite ak pèfòmans optimal glasyè likid ou a:

• Netwayaj pousyè: Netwaye najwa radyatè yo ak lam vantilatè yo detanzantan pou anpeche pousyè akimile, sa ki ka anpeche sikilasyon lè a epi diminye efikasite refwadisman an. Sèvi ak lè konprese oswa yon bwòs mou.
• Inspect Tubing and Connections: Occasionally check the tubing for any signs of leaks or kinks. Ensure all electrical connections are secure.
• Pat tèmik: While not frequently required, if you ever remove the pump head from the CPU, you will need to clean off the old thermal paste and apply new paste before reinstallation.

NAN. Depanaj

If you encounter issues with your DARKROCK D240 CPU Liquid Cooler, consider the following:

• Pa gen pouvwa/pa gen limyè:
  • Check all power connections (pump, fans, RGB controller) to ensure they are securely plugged in.
  • Verify that the motherboard headers are supplying power (check BIOS settings).
  • If using an RGB controller, ensure it is receiving SATA power.
• Tanperati CPU ki wo:
  • Confirm the pump is running (you might feel a slight vibration or hear a low hum).
  • Ensure the pump head is securely mounted to the CPU and thermal paste was applied correctly.
  • Check fan operation and ensure they are spinning and providing adequate airflow.
  • Netwaye tout pousyè ki sou najwa radyatè yo.
• bri nòmal:
  • Identify if the noise is coming from the fans or the pump.
  • For fans, check for obstructions or loose mounting.
  • For pump noise, ensure it's not running dry (though unlikely with a sealed AIO).
• RGB Not Working/Incorrect Colors:
  • Verify the ARGB cables are connected to a 5V 3-pin header, not a 12V 4-pin RGB header, as this can cause damage.
  • Check motherboard RGB software settings or RGB controller mode.
  • Ensure all ARGB connections are firm.

6. Espesifikasyon

7. Garanti ak sipò

For warranty information and technical support, please refer to the official DARKROCK websit la oubyen kontakte sèvis kliyan yo. Kenbe prèv acha ou pou nenpòt reklamasyon garanti.

Optional protection plans may be available for extended coverage. Please check with your retailer for details on available protection plans.