TAXNELE TXATS3-63A/4P Din Rail Automatic Transfer Switch User Manual

1. Entwodiksyon

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the TAXNELE TXATS3-63A/4P Din Rail Automatic Transfer Switch (ATS). The TXATS-3 is a PC class infrequent change-over switch designed for AC systems with 50-60Hz frequency and a rated current of 6A-63A. Its primary function is to automatically switch to a backup power supply (Power B) when the main power (Power A) fails, ensuring an uninterrupted power supply with a switching speed of less than 50 milliseconds. When both power sources are available, Power A is prioritized.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before installing, operating, or performing maintenance on the ATS. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• Enstalasyon ak antretyen ta dwe fèt sèlman pa elektrisyen kalifye.
• Ensure all power sources are disconnected before beginning any installation or wiring work.
• Sèvi ak ekipman pwoteksyon pèsonèl (PPE) ki apwopriye tankou gan izole ak linèt sekirite.
• Verify correct wiring connections to prevent damage to the device and connected equipment.
• Do not operate the ATS if it appears damaged or malfunctions.
• The device must be installed in an enclosure that provides adequate protection against environmental factors.

3. Pwodwi souview

3.1 Karakteristik

• Dual Power Inputs: Connects to two separate power sources for continuous operation.
• Transfè otomatik: Seamlessly switches between power sources without manual intervention.
• Konsepsyon kontra enfòmèl ant: DIN rail-mountable for easy installation in electrical cabinets.
• Konstriksyon solid: Made with high-quality, wear-resistant, and heat-resistant materials for durability.
• Aplikasyon lajè: Suitable for industrial equipment, telecommunications, and backup power systems.

3.2 Konpozan ak Endikatè

The TAXNELE TXATS3-63A/4P ATS features clearly labeled terminals and indicators for easy identification and operation.

Deskripsyon imaj: Yon fasad detaye view of the TAXNELE TXATS3-63A/4P Automatic Transfer Switch with various components labeled. Key labels include: Backup power neutral wire (N2 A2), Backup power live wire (C2 B2), Common power neutral wire (N1 A1), Common power live wire (C1 B1), Common power supply indicator (green LED), Backup power supply indicator (red LED), Auto/Manual Switch, Manual operation handle, Load ON indicator (green LED), Load output neutral wire (NA), and Load output live wire (BC).

Deskripsyon imaj: Yon devan klè view of the TAXNELE TXATS3-63A/4P Automatic Transfer Switch, showing its white casing, green and red indicator lights, the auto/manual switch, and the manual operation handle. Product specifications are printed on the front, including rated current, voltage, frequency, and control voltage.

Deskripsyon imaj: This image emphasizes the durable construction of the ATS. It shows the device with visual cues suggesting its heat-resistant and cold-resistant shell, indicating its suitability for various environments. The text overlay states, "THE SHELL IS COLD AND HEAT-RESISTANT, MAKING IT MORE STABLE FOR USE."

4. Espesifikasyon

Deskripsyon imaj: A technical drawing showing the dimensions of the TAXNELE TXATS3-63A/4P ATS. The front view indicates a width of 82.45mm and a height of 107.8mm. A side view provides depth measurements, including 70mm and 78.86mm for the base, and 93.8mm and 105.8mm for the overall height from the DIN rail.

5. Enstalasyon (Enstalasyon)

The TAXNELE TXATS3-63A/4P ATS is designed for 35mm standard DIN rail installation. Ensure all power is off before proceeding with installation.

5.1 Montaj

1. Select a suitable location within an electrical cabinet or distribution panel that provides adequate ventilation and protection.
2. Align the ATS with the 35mm DIN rail.
3. Press the ATS firmly onto the DIN rail until it clicks into place, ensuring it is securely mounted.

Deskripsyon imaj: This image illustrates the installation of the ATS on a 35mm standard DIN rail. The ATS units are shown mounted inside a household lighting distribution box, demonstrating how they integrate into an existing electrical setup. The text overlay highlights "35MM STANDARD RAIL INSTALLATION."

5.2 fil elektrik

Refer to the wiring diagram below for proper connection of common power, backup power, and load outputs. Ensure all connections are tight and secure.

Deskripsyon imaj: A simplified wiring diagram for the ATS. It shows the connections for "Common power" (input I) and "Backup power" (input II) leading to the respective terminals. The "Load" output is shown connected from the bottom terminals. Blue lines indicate neutral connections, and red lines indicate live connections for both input sources and the load.

• Connect the main (common) power supply to terminals N1 A1 (neutral) and C1 B1 (live) under section 'I'.
• Connect the backup power supply to terminals N2 A2 (neutral) and C2 B2 (live) under section 'II'.
• Connect the load to terminals NA (neutral) and BC (live) at the bottom of the ATS.
• Double-check all wiring for correctness and tightness before restoring power.

6. Operasyon

The TXATS3-63A/4P ATS can operate in both automatic and manual modes.

6.1 Mòd otomatik

1. Set the Auto/Manual switch to the "AUTO" position.
2. When the common power supply (Power A) is present, the ATS will automatically connect the load to Power A. The green "Common power supply" indicator will illuminate.
3. If Power A fails, the ATS will detect the outage and automatically switch the load to the backup power supply (Power B) within 50 milliseconds. The red "Backup power supply" indicator will illuminate.
4. When Power A is restored, the ATS will automatically switch the load back to Power A, prioritizing the common power source.

Deskripsyon imaj: This image highlights the automatic switching capability of the ATS, stating "AUTOMATIC SWITCHING AFTER POWER OFF <50MS". It visually represents the rapid transfer function, ensuring minimal interruption to power supply.

6.2 Manyèl Mode

In manual mode, the power source can be selected using the manual operation handle.

1. Set the Auto/Manual switch to the "MANU" position.
2. Use the manual operation handle to select between Power I (Common Power) and Power II (Backup Power).
3. The corresponding indicator light (green for Power I, red for Power II) will illuminate.
4. Atansyon: Ensure the load can handle the selected power source when operating in manual mode.

7. Antretyen

Antretyen regilye ede asire lonjevite ak fonksyònman serye ATS ou a.

• Enspeksyon peryodik: Visually inspect the ATS and its connections periodically for any signs of damage, loose wiring, or overheating.
• Netwayaj: Kenbe aparèy la pwòp epi san pousyè ak debri. Sèvi ak yon twal sèk epi mou pou netwaye. Pa sèvi ak pwodui netwayaj likid.
• Tcheke Koneksyon: Ensure all terminal connections remain tight. Loose connections can lead to overheating and malfunction.
• Tès Fonksyon: Periodically test the automatic transfer function by simulating a main power failure (if safe to do so and permitted by your electrical setup).
• Sèvis pwofesyonèl: For any complex issues or internal repairs, contact a qualified electrician or the manufacturer's support.

NAN. Depanaj

This section addresses common issues you might encounter with your ATS.

If troubleshooting steps do not resolve the issue, please contact customer support or a qualified electrician.

9. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the purchase documentation or contact TAXNELE customer service. Keep your purchase receipt as proof of purchase.