OONO DIN Rail Mount 16 LEDs Indicator Light Module

Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your OONO DIN Rail Mount 16 LEDs Indicator Light Module. This module is designed for industrial and electrical applications, offering clear visual indication with 16 independent LED channels. Please read this manual thoroughly before use to ensure proper and safe operation.

Enfòmasyon sou Sekirite

• Always disconnect power before installing, wiring, or performing maintenance on the module.
• Asire w ke tout fil elektrik yo konfòm ak kòd elektrik lokal ak nasyonal yo.
• This module operates with DC voltage. Verify correct polarity before applying power.
• Do not exceed the specified operating voltage seri de 5VDC a 50VDC.
• Avoid exposing the module to excessive moisture, dust, or extreme temperatures.
• Se sèlman pèsonèl kalifye ki ta dwe fè enstalasyon ak fil elektrik.

Pwodwi souview

The OONO D-1003T Series is a 16-channel LED indicator light module featuring 5mm blue LEDs. It supports both Common Positive and Common Negative control modes, making it versatile for various circuit designs. The module is equipped with 5.0mm pitch screw terminal blocks for secure wire connections and comes with a high-quality fireproof nylon DIN rail mount carrier.

Karakteristik kle:

• 16 independent LED indicator channels.
• Wide opere voltage range: 5VDC to 50VDC.
• Supports Common Positive and Common Negative control.
• Robust 5.0mm pitch screw terminal blocks.
• DIN rail mountable (35mm, 32mm, 15mm compatible) with detachable carrier for panel mounting.
• FR-4 fiber glass PCB for durability.

Eleman:

• 16 x 5mm Blue LEDs
• Input Terminal Blocks (Channels 1-8, 9-16, COM)
• DIN Rail Mount Carrier
• FR-4 PCB

Figi 1: Anwo-anba view of the 16-LED indicator module, showing the LED array and terminal blocks.

Figure 2: Angled perspective of the module, highlighting its compact design and integrated DIN rail mounting mechanism.

Espesifikasyon

Figure 3: Detailed dimensional drawing of the module, showing key measurements in millimeters.

Enstalasyon ak Enstalasyon

Ki sa ki nan bwat la:

• 1 x DIN rail mount indicator light module

Mounting the Module:

The module is designed for easy installation on standard DIN rails (35mm, 32mm, or 15mm). The carrier can also be detached for panel mounting applications.

1. Montaj DIN Rail: Align the module's clips with the DIN rail. Press down firmly until the module snaps securely onto the rail. Ensure it is seated properly and does not wobble.
2. Montaj panèl: The DIN rail carrier can be disassembled from the main PCB. Once detached, the PCB can be mounted directly to a panel using appropriate standoffs or screws (not included).

Figure 4: The indicator module securely mounted on a standard DIN rail, ready for wiring.

Enstriksyon fil elektrik:

The module features 5.0mm pitch screw terminal blocks for connecting input signals. Each LED channel (1-16) has a dedicated input terminal, and there is a common (COM) terminal.

1. Prepare Fil: Strip approximately 7mm (0.28 inches) of insulation from the ends of your wires (26 to 12AWG / 2.5mm²).
2. Konekte Antre yo: Loosen the screws on the desired terminal blocks. Insert the stripped wire ends fully into the terminal openings. Tighten the screws to secure the wires. Gently tug on the wires to ensure a firm connection.
3. Common Connection: Connect the common return path of your control circuit to the "COM" terminal.

Figi 5: Close-up view of the screw terminal blocks, indicating channel numbers and the common terminal.

Mòd fonksyònman

The OONO D-1003T Series supports both Common Positive and Common Negative control configurations. This flexibility allows integration into various existing control systems.

Common Positive Control:

In this mode, the "COM" terminal is connected to the positive supply voltage. Each individual channel terminal (1-16) is then connected to the negative side of the control signal. When a channel's input is pulled low (connected to ground or negative supply), the corresponding LED will illuminate.

• Connect the positive supply (e.g., +5VDC to +50VDC) to the COM tèminal.
• Connect the negative side of your control signal for each channel (1-16) to its respective input terminal.
• LED illuminates when the input terminal is connected to the negative potential.

Common Negative Control:

In this mode, the "COM" terminal is connected to the negative supply voltage (ground). Each individual channel terminal (1-16) is then connected to the positive side of the control signal. When a channel's input is pulled high (connected to positive supply), the corresponding LED will illuminate.

• Connect the negative supply (e.g., Ground) to the COM tèminal.
• Connect the positive side of your control signal for each channel (1-16) to its respective input terminal.
• LED illuminates when the input terminal is connected to the positive potential.

Figure 6: Internal circuit diagram illustrating the connection of LEDs and resistors to the input and common terminals.

Antretyen

The OONO DIN Rail Mount 16 LEDs Indicator Light Module is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

• Netwayaj: If necessary, gently wipe the module with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
• Tcheke Koneksyon: Periodically inspect terminal block screw connections to ensure they remain tight and secure. Loose connections can lead to intermittent operation or damage.
• Kondisyon anviwònman: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component degradation.

Depanaj

Garanti ak sipò

For warranty information and technical support, please refer to the official OONO website or contact your authorized distributor. Keep your purchase receipt as proof of purchase for any warranty claims.

Manifakti: CZH-LABS

Mak: OONO

Pou plis asistans, ou ka vizite Magazen OONO sou Amazon.