Jectse RC Airplane Servo PDB Module User Manual

1. Entwodiksyon

The Jectse RC Airplane Servo PDB Module is specifically designed for RC fixed wing aircraft FPV applications. It provides a stable and adjustable power output for servo components, ensuring reliable performance for your aircraft's control systems.

This module integrates a 4Amp BEC (Battery Eliminator Circuit) to efficiently meet the power requirements of various servo setups. Its compact design and clear labeling facilitate easy and correct installation.

2. Pwodwi souview

The Jectse RC Airplane Servo PDB Module is a printed circuit board (PCB) with integrated components for power regulation and distribution. It includes input terminals for battery connection and multiple output terminals for connecting servos.

3. Espesifikasyon

4. Enstalasyon ak Enstalasyon

The module is designed for straightforward installation due to its compact size and clearly labeled connection ports. Follow these steps for correct setup:

1. Idantifye Pwen Koneksyon yo: Chèche antre voltage (Vbat) and ground (G) pads, as well as the servo output pads (1-6) and voltage selection jumpers (6V, 7.2V, 5V adjustable).
2. Antre pouvwa: Connect your power source (5.5V to 36V, e.g., lithium battery up to 8S) to the Vbat and G pads. Ensure correct polarity to prevent damage.
3. Koneksyon Sèvo: Connect your servos to the numbered output pads. The module provides regulated power output for these servo components.
4. Voltage Seleksyon:
   • The module supports default servo settings of 5V, 6V, and 7.2V.
   • Use the jumpers or designated pads on the PCB to select the desired output voltage for your servos. Refer to the markings on the PCB for 6V and 7.2V options.
   • An adjustable 5V option is also available for fine-tuning.
5. Enstalasyon an sekirite: Mount the module securely within your RC fixed wing aircraft. Ensure it is protected from vibrations, moisture, and potential physical damage.

5. Operasyon Enstriksyon

Once installed and connected, the module operates by converting the input voltage from your battery to the selected stable output voltage for your servos. It ensures efficient and consistent power delivery to all connected servo components.

• Pouvwa sou: Apply power to the Vbat input. The integrated 4Amp BEC will automatically regulate the voltage for the servo outputs based on your selection.
• Kapasite aktyèl: The module provides a continuous current load of 4A and a burst current capacity of 7A, which is sufficient for most standard RC servo requirements. Ensure the total current draw of your servos does not exceed these limits.
• Siveyans pèfòmans: During initial operation and subsequent flights, it is advisable to monitor the performance of your servos and the overall power system to ensure stable operation.

6. Antretyen

The Jectse RC Airplane Servo PDB Module is designed for durability and requires minimal maintenance. However, following these guidelines can help ensure its longevity and optimal performance:

• Kenbe pwòp: Regularly inspect the module for dust, dirt, or debris. Gently clean with a soft, dry brush or compressed air if necessary. Avoid using liquids or harsh chemicals.
• Enspekte Koneksyon: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage. Loose connections can lead to intermittent power supply or performance issues.
• Pwoteksyon anviwònman: Protect the module from extreme temperatures, high humidity, and direct sunlight. While robust, these conditions can degrade electronic components over time.
• Evite estrès fizik: Do not bend or apply excessive force to the PCB or its components. Ensure it is mounted in a location where it will not be subjected to impacts or excessive vibration.

NAN. Depanaj

If you encounter issues with your Jectse RC Airplane Servo PDB Module, consider the following troubleshooting steps:

• Pa gen pwodiksyon pouvwa:
  • Verifye opinyon voltage source (battery) is charged and connected correctly to the Vbat and G pads.
  • Check for any loose or disconnected wires in the power path.
  • Asire vol D' atage se nan seri a espesifye (5.5V a 36V).
• Volim Sòti ki Pa Kòrèktage:
  • Konfime ke voltage selection jumpers or settings are correctly configured for your desired output (5V, 6V, or 7.2V).
  • Mezire volim pwodiksyon antage with a multimeter to confirm the actual voltage.
• Servos Behaving Erratically or Weakly:
  • This could indicate insufficient current. Ensure the total current draw of your servos does not consistently exceed the module's continuous (4A) or burst (7A) current capacity.
  • Check for short circuits in the servo wiring or faulty servos.
  • Verify that the servos themselves are functioning correctly by testing them with an alternative power source if possible.
• Modil ki chofe twòp:
  • Ensure adequate airflow around the module, especially if it's enclosed.
  • Check if the current draw is consistently exceeding the continuous current rating, leading to excessive heat generation.
  • Verifye ke D' voltage is not excessively high, which can cause the BEC to dissipate more heat.

Si pwoblèm yo pèsiste apre ou fin eseye etap sa yo, kontakte sèvis kliyan pou plis asistans.

8. Garanti ak sipò

This product is covered by a standard return policy. For specific details regarding warranty coverage, returns, or technical support, please refer to the purchase platform or contact Jectse customer service directly.

Sèvis Kliyan: Pou asistans, tanpri vizite Jectse Store on Amazon oubyen gade enfòmasyon kontak yo te bay avèk acha ou a.