User Manual for Polibi Full-Over-Full Metal Bunk Bed

Entwodiksyon

Mèsi pou acha aasing the Polibi Full-Over-Full Metal Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read these instructions carefully before beginning assembly and retain them for future reference.

Enstriksyon Sekirite

To ensure safe use of this product, please adhere to the following safety guidelines:

• Always follow assembly instructions precisely. Do not deviate from the steps.
• Ensure all connections are tight before use. Periodically check and re-tighten hardware.
• Kabann ki anlè a pa apwopriye pou timoun ki poko gen 6 an.
• Use only mattresses that meet the recommended thickness and dimensions. (Recommended Bed Mattress Thickness (Upper/ Down): 4-6'' / 8'')
• Do not allow horseplay on or under the bed.
• Toujou sèvi ak nechèl la pou jwenn aksè nan kabann ki anlè a.
• Ensure the slide is securely attached and positioned on a stable surface if in use.
• Pwodwi sa a fèt pou itilize andedan kay la sèlman.
• Maximum weight capacity for the upper bed is 250 lbs. Maximum weight capacity for the bottom bed is 350 lbs.

Pwodwi konpozan

Before assembly, verify that all parts are present and undamaged. Refer to the included hardware list for specific component identification.

Figure 1: Overall Dimensions and Key Measurements. This diagram illustrates the length, width, and height of the bunk bed, including the slide, providing a comprehensive overview nan gwosè li.

Enstalasyon ak Asanble

Assembly requires at least two adults. Clear a spacious area for assembly. Do not fully tighten screws until all components are loosely assembled.

1. Depake tout konpozan yo epi mete yo sou yon sifas mou epi pwòp pou evite reyur.
2. Identify all frame pieces, guardrails, ladder, and slide.
3. Begin by assembling the main bed frames (upper and lower) according to the detailed diagrams in the separate assembly guide.
4. Attach the mattress support slats to both upper and lower frames. Ensure they are evenly spaced and securely fastened.
5. Install the guardrails on the upper bunk. Verify they are firmly attached to prevent falls.
6. Attach the ladder to the designated side of the bunk bed. Ensure it is stable and provides safe access to the upper bunk.
7. Attach the slide to the designated opening. The slide and ladder are convertible and can be swapped or the slide can be omitted. Ensure the slide is securely fastened and rests on a stable surface.
8. Once all components are in place, gradually tighten all screws and bolts. Do not overtighten.
9. Perform a final check to ensure all connections are secure and the bed is stable before use.

Figure 2: Convertible Bunk Bed to Loft Bed Configuration. This image demonstrates how the bunk bed can be reconfigured into a loft bed, offering versatility in room design.

Figure 3: Convertible Slide and Ladder Options. This image illustrates the flexibility of swapping the slide and ladder positions to best suit your space and preferences.

Enstriksyon Operasyon

This bunk bed is designed for sleeping and light recreational use of the slide. Adhere to the following:

• Ensure mattresses are properly placed and do not exceed the recommended thickness.
• Only one person should use the slide at a time.
• Pa sote sou kabann nan.
• When converting the bed to a loft configuration, ensure all components are securely reassembled and stable.

Antretyen

Regular maintenance will prolong the life of your bunk bed:

• Periodically check all bolts and screws to ensure they are tight. Re-tighten as necessary, but do not overtighten.
• Netwaye ankadreman metal la avèk yon twal mou,amp twal. Evite pwodui netwayaj abrazif oswa pwodui chimik ki fò.
• Inspect the slide and ladder for any signs of wear or damage. Replace damaged parts immediately.
• Keep the bed dry and away from excessive moisture.

Figure 4: Mattress Slats Detail. This image shows the sturdy metal slats that provide support for the mattress, eliminating the need for a box spring.

Figure 5: Guardrail Gate Detail. This image highlights the design of the full-length guardrail with a handy gate, enhancing safety and access.

Depanaj

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please contact Polibi customer service. Details are typically provided with your purchase documentation or can be found on the manufacturer's official websit.

Manufacturer: Polibi

Dat Premye Disponiblite: 22 Out 2024

Pou plis asistans, tanpri vizite Polibi Store on Amazon.