ELAMOR M19 Fingerprint Keyless Entry Door Lock Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your ELAMOR M19 Fingerprint Keyless Entry Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and security.

Figure 1: ELAMOR M19 Fingerprint Keyless Entry Door Lock

Karakteristik kle

• 3-in-1 Keyless Unlock: Supports up to 100 fingerprints, 50 PIN codes, and 2 mechanical keys for versatile access. No app or Wi-Fi connection is required for primary functions.
• Advanced Biometric Technology: Identifies fingerprints in 0.3 seconds and unlocks within 1 second, with a 99.99% success rate.
• Automatic Locking & One-Touch Locking: Adaptable automatic locking function (5 to 30 seconds) and convenient one-touch locking for enhanced security.
• Durable & Long-lasting: Constructed from sturdy aluminum alloy, IP54 waterproof certified, features a low battery indicator LED, resilient lock cylinder, and an emergency USB Type-C power supply interface.
• Enstalasyon fasil: Simple installation with a basic screwdriver, adjustable center distance (2-3/8" to 2-3/4" or 60mm to 70mm) for a seamless fit.

Figi 2: Plis paseview of ELAMOR M19 Smart Security Features

Enstalasyon ak Enstalasyon

1. Door Preparation and Dimensions

Asire w pòt ou a satisfè espesifikasyon sa yo pou yon enstalasyon kòrèk:

• Door Holes: Only suitable for 2-1/8" (54mm).
• Epesè Pòt: 1-3/8" and 2" (35mm to 50mm).
• Adjustable Center Distance (Backset): 2-3/8" (60mm) to 2-3/4" (70mm).

Figure 3: Door Measurement Guidelines

2. Lis Pati

Verifye tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

Video 1: ELAMOR M19 Smart Lock Installation Guide (0:16 - 0:20 shows parts list)

3. Etap enstalasyon yo

Swiv etap sa yo pou yon enstalasyon siksè:

1. Adjust Latch Bolt: Twist the latch to adjust the bolt length to either 60mm or 70mm, ensuring the latch bolt is retracted.
2. Insert Latch Bolt: Insert the latch bolt into the door, making sure the T-shaped hole is in the bottom position.
3. Enstale plak grèv la: Secure the strike plate on the door frame using the provided 3/4" (19mm) screws (2ea).
4. Enstale asanble eksteryè: Route the cable through the door, pass the tail of the exterior assembly through the T-shaped hole, and stud through the latch. Ensure the key is pulled out when installing and push the keypad onto the door.
5. Enstale Plak Montaj: Remove the mounting plate from the interior assembly, then attach it to the door using the 1-5/32" (33mm) screws (2ea).
6. Enstale Asanble Enteryè: Ensure a tight cable connection. Insert the tail of the exterior assembly into the T-shaped hole of the interior assembly. Fix the interior assembly using the 3/4" (19mm) screws (2ea).
7. Enstale pil: Insert 4 AAA batteries into the interior assembly.
8. Fonksyonalite Tès Lock: Press the lock key to ensure the latch bolt extends by itself. Unlock using the default user code 123456.

Video 2: ELAMOR M19 Smart Lock Installation Guide

Enstriksyon Operasyon

This section details how to program and use your ELAMOR M19 lock.

1. Chanje Kòd Mèt

The default master code is 123456. It is recommended to change this immediately after installation.

1. Press the 'Set' button (located on the interior assembly).
2. Enter the Default Master Code (123456).
3. Peze '4' sou klavye a.
4. Enter your New Master Code (e.g., 147147).
5. Confirm your New Master Code (e.g., 147147).

Video 3: Change Master Code (0:00 - 0:37)

2. Add User Code

You can add up to 50 user codes.

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '1' sou klavye a.
4. Enter a 2-digit User ID (01 to 50).
5. Enter the New User Code (e.g., 258369).
6. Confirm the New User Code (e.g., 258369).

Video 4: Add User Code (0:38 - 1:16)

3. Delete Single User Code

To remove a specific user code:

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '2' sou klavye a.
4. Enter the 2-digit User ID of the code you wish to delete.
5. Confirm the 2-digit User ID.

Video 5: Delete Single User Code (1:17 - 1:44)

4. Efase Tout Kòd Itilizatè yo

This action will remove all programmed user codes, but not the Master Code.

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '3' sou klavye a.
4. Confirm the Master Code.

Video 6: Delete All User Codes (1:45 - 2:12)

5. Mete Tan Auto Lock

Configure the automatic locking delay (5 to 30 seconds).

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '5' sou klavye a.
4. Enter the desired auto-lock time (e.g., '05' for 5 seconds, '30' for 30 seconds).

Video 7: Set Auto Lock Time (2:13 - 2:29)

6. Cancel Auto Lock

To disable the automatic locking feature:

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '5' sou klavye a.
4. Enter '00' on the keypad.

Video 8: Cancel Auto Lock (2:30 - 2:45)

7. Son On/Off

Toggle the sound alerts for the lock.

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '6' sou klavye a.
4. Press '1' for Sound Off or '2' for Sound On.

Video 9: Sound On/Off (2:46 - 3:20)

8. Ajoute anprent

Ou ka ajoute jiska 100 anprent dwèt.

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '7' sou klavye a.
4. Press your finger on the fingerprint sensor 6 times, lifting it slightly between each press.

Video 10: Add Fingerprint (3:21 - 3:51)

9. Delete All Fingerprints

This action will remove all programmed fingerprints.

1. Press the 'Set' button.
2. Antre Kòd Mèt la.
3. Peze '8' sou klavye a.
4. Confirm the Master Code.

Video 11: Delete All Fingerprints (3:52 - 4:18)

Antretyen

Ranplasman batri

The lock requires 4 AAA batteries (not included). Replace batteries when the low battery indicator LED is active or if the lock shows signs of power issues.

1. Retire kouvèti batri a sou asanblaj enteryè a.
2. Retire ansyen pil yo.
3. Mete nouvo pil AAA yo, asire w ke polarite a kòrèk.
4. Ranplase kouvèti batri a.

Video 12: Battery Replacement (0:09 - 0:29)

Depanaj

Gade solisyon sa yo pou pwoblèm komen:

1. Red Light on when any key is pressed, but not locked/unlocked successfully

Pwoblèm: The lock's red light illuminates when a key is pressed, but the lock does not respond to lock/unlock commands.

Solisyon: Replace the batteries. This indicates low battery power.

Video 13: Red Light Issue (0:43 - 1:26)

2. Keypad and Indicator Not Responding

Pwoblèm: The keypad and indicator lights do not respond to any input.

Solisyon: Replace the batteries. This indicates completely drained batteries.

Video 14: Keypad Not Responding (2:07 - 2:55)

3. Keypad Lockout (Incorrect Password)

Pwoblèm: The keypad locks after entering an incorrect password 5 times within one minute.

Solisyon 1: Reinstall the batteries. This can reset the lockout state.

Solisyon 2: Wait for 90 seconds until the keypad automatically unlocks.

Video 15: Keypad Lockout (2:56 - 4:09)

Espesifikasyon

Garanti ak sipò

ELAMOR provides the following for your M19 Fingerprint Keyless Entry Door Lock:

• Ranplasman: 12 months replacement available from the date of purchase.
• Sèvis ak sipò teknik: Lifetime service and technical support.

For further assistance, please contact ELAMOR customer service.