Manyèl Itilizatè Twous Irigasyon Degoute Otomatik MARS HYDRO (13 Galon)

1. Entwodiksyon

This manual provides detailed instructions for the setup, operation, and maintenance of your MARS HYDRO Auto Drip Irrigation Kit. This system is designed to provide efficient and automated watering for various plant types in indoor grow tents, outdoor gardens, and greenhouses. It features a 13-gallon foldable bucket, an upgraded 24W water pump, and 8 adjustable drip emitters to ensure precise irrigation.

2. Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou itilize aparèy la. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife oswa blesi grav.

• Ensure the power adapter and pump are kept away from water and moisture to prevent electrical hazards.
• Do not operate the pump if the water level is below 1.97 inches (5 cm) to prevent damage to the pump. The pump is designed to automatically stop in such conditions.
• Toujou dekonekte ekipman pou kouran an anvan ou fè nenpòt antretyen oswa netwayaj.
• Keep all electrical components and wiring away from children and pets.
• Use only the provided power adapter with the water pump.
• Regularly inspect all tubing and connections for leaks or damage. Address any leaks immediately to prevent water damage to your surroundings.
• When adding fertilizers or nutrient solutions, ensure they are fully dissolved or diluted to prevent clogging of pipes and emitters. Flush the system with clean water regularly.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje lè w ap ouvri pake a.

• 1x pouvwa adaptè
• 1x DC Water Pump (24W)
• 5x Upright Column Base
• 1x 13 Gallon (50L) Foldable Bucket
• 5x Upright Column
• 2x Tube Connector
• 1x 8/12mm Silicone Tube (2m / 78.8 inches)
• 1x Drain Switch Valve
• 1x Valv Tcheke
• 8x 8-outlet Drip Emitters
• 1x 8/12 Locking Switch Valve
• 1x 4/6mm PVC Tube (12m / 472.4 inches)
• 1x 8/12mm Locking Plug
• 1x Overflow Spout

4. Enstriksyon Enstalasyon

Follow these steps to assemble your MARS HYDRO Auto Drip Irrigation Kit.

4.1. Assemble the Bucket

1. Connect the upright column bases to the upright columns.
2. Insert the assembled upright columns into the designated sleeves inside the foldable bucket to provide structural support.
3. Install the drain switch valve onto the bucket's lower outlet. Ensure the waterproof ring is correctly seated to prevent leaks.
4. Install the overflow spout onto the bucket's upper outlet, ensuring the waterproof ring is correctly seated.

4.2. Connect the Water Pump and Tubing

1. Connect the AC adapter to the DC water pump.
2. Insert the 8/12mm silicone tube into the bucket and connect it to the water pump.
3. Attach the check valve and the 8/12mm locking switch valve to the 8/12mm water tube. Ensure the check valve is installed in the correct direction as indicated by the arrow.
4. Connect the 4/6mm PVC tube to the tube connectors and then to the 8-outlet drip emitters. You may need to cut the tubes to your desired length. For easier installation, use a hair dryer to heat and soften the tube ends before attaching connectors and emitters.
5. Attach the locking plug at the end of the 8/12mm water tube to seal the system.

For a visual guide on installation, please watch the official setup video:

5. Operasyon Enstriksyon

Once assembled, follow these steps to operate your drip irrigation system.

5.1. Konble rezèvwa a

Fill the 13-gallon foldable bucket with water. The visible water level indicator helps monitor the remaining water. If using fertilizers or nutrient solutions, ensure they are fully dissolved or diluted before adding them to the reservoir to prevent clogging.

5.2. Adjusting Drip Emitters

The drip emitters feature 360° adjustable sprinkle heads. Rotate the heads to control the water flow and distribution according to your plants' needs. This allows for precise irrigation, saving water and promoting healthy growth.

5.3. Automatic Watering (Optional)

For automated watering, connect the system to a MARS HYDRO digital timer (sold separately). This allows you to customize watering times and frequency, ensuring your plants receive consistent hydration without constant manual intervention. The pump automatically stops when the water level is below 1.97 inches (5 cm) as a safety measure.

See the video below for more information on hydrating your plants with the system:

6. Antretyen

Proper maintenance ensures the longevity and efficiency of your irrigation system.

• Lave regilye: If using nutrient solutions, regularly flush the entire system with clean water to prevent mineral buildup and clogging in the tubes and emitters.
• Netwayaj ponp: The water pump includes a strainer to prevent clogging. Periodically remove and clean the strainer to ensure optimal water flow.
• Enspeksyon Tib: Inspect all tubing for kinks, blockages, or damage. Replace any damaged sections to maintain system integrity.
• Emitter Check: Ensure all drip emitters are functioning correctly and are not clogged. Clean or replace any malfunctioning emitters.
• Bucket Cleaning: Clean the foldable bucket periodically to prevent algae growth or sediment accumulation.

For answers to common questions about the system, including maintenance tips, refer to the video below:

NAN. Depanaj

If you encounter issues with your drip irrigation kit, refer to the following troubleshooting guide:

8. Espesifikasyon

• Dimansyon pwodwi: 16.5 x 4.9 x 6.7 pous
• Pwa atik: 5 liv
• Nimewo Modèl: Twous irigasyon degoute
• Mak: MAS HYDRO
• Materyèl: PVC, Silicone, Nylon
• Bokit Kapasite: 13 galon (apeprè 50 lit)
• Pouvwa ponp dlo: 24W
• Pousantaj koule ponp dlo: Up to 900L/H
• Water Pump Rating: IPX8 ki enpèmeyab
• Drip Emitters: 8 (360° adjustable)
• Karakteristik sekirite: Pump automatically stops when water level is below 1.97 inches (5 cm).

9. Garanti ak sipò

For warranty information or technical support, please contact MARS HYDRO customer service. Refer to the product packaging or the official MARS HYDRO website for contact details and specific warranty terms applicable to your region.

Websit: Magazen MARS HYDRO