Wuloo Solar Driveway Alarm System User Manual

1. Entwodiksyon

Thank you for choosing the Wuloo Solar Driveway Alarm System. This wireless, weatherproof motion sensor and receiver system is designed to provide reliable alerts for activity in your driveway, walking path, garage, or other outdoor areas. Featuring solar charging, a long-range signal, and adjustable settings, this system offers enhanced security and convenience for your property. Please read this manual carefully before installation and operation to ensure optimal performance and longevity of your device.

2. Pwodwi souview

The Wuloo Solar Driveway Alarm System includes a solar-powered motion sensor and an indoor receiver. This section details the components and their key features.

2.1 Kontni pake a

• 1 x Solar Motion Sensor
• 1 x Indoor Receiver
• Montage vis ak lank
• 1 x Type-C Charging Cable (for initial charging if needed)
• 1 x tournevis
• 1 x manyèl itilizatè

Figi 2.1: Konpozan ak Dimansyon ki Enkli yo

2.2 Eleman Sistèm

Capteur Mouvman Solè

• Sous pouvwa: Solar panel with rechargeable Lithium Polymer (LiPo) battery.
• Mòd travay: 4 modes (Light & Alarm, Light Only, Alarm Only, Mute).
• Sansiblite: 3-level adjustable sensitivity to minimize false alarms.
• Enpèmeyab: Designed to operate effectively in rain or snow.
• Melodi: 12 different melodies available.

Figure 2.2: Solar Motion Sensor Features

Andedan kay la reseptè

• Chimes: 16 adjustable chimes, allowing different chimes for multiple sensors.
• Volim: 4 adjustable volume levels, including a mute option.
• Peyaj: Easy pairing process with sensors.
• Prompt Sounds: Includes 'turn on', 'turn off', 'pairing finished', and 'pairing cleared' prompts.

Figure 2.3: Indoor Receiver Features

Figure 2.4: Wuloo Solar Driveway Alarm System (Sensor and Receiver)

3. Enstalasyon ak Enstalasyon

This section provides instructions for setting up and installing your Wuloo Solar Driveway Alarm System.

3.1 Capteur plasman

• Choose a location for the sensor that provides a clear line of sight to the detection area (e.g., driveway, gate, walking path).
• Ensure the solar panel on top of the sensor receives adequate direct sunlight for optimal charging.
• Mount the sensor securely using the provided screws and anchors. The sensor can be wall-mounted.
• Position the sensor approximately 3-4 feet (0.9-1.2 meters) above the ground for best detection results.
• Avoid pointing the sensor directly at moving objects like trees or bushes that might cause false alarms.

Figure 3.1: Common Installation Scenarios

3.2 Plasman Reseptè a

• Place the receiver indoors, ideally in a central location where the alarm can be heard throughout your home.
• Ensure the receiver is within the 1/2 mile (approx. 800 meters) signal range of the sensor. Note that obstacles like thick walls, buildings, and dense foliage can reduce the effective range.

Figure 3.2: Signal and Detection Range

3.3 Initial Charging (Sensor)

While the sensor is solar-powered, it is recommended to fully charge it using the provided Type-C cable before first use, especially if it has been stored for a long time or if sunlight is limited. Connect the Type-C cable to the sensor's charging port and a DC 5V adapter (not included).

3.4 Pairing Sensor and Receiver

The sensor and receiver typically come pre-paired. If re-pairing is needed or if you are adding additional sensors:

1. On the receiver, press and hold the PAIR button until you hear a 'welcome' prompt sound. This puts the receiver into pairing mode.
2. On the sensor, press the ON/OFF button for 3 seconds to turn it on.
3. The sensor and receiver should automatically pair. You will hear a 'pairing finished' prompt from the receiver.
4. To clear existing pairing history on the receiver, press the PAIR & Volume buttons simultaneously. You will hear 'pairing cleared'.

The system is expandable, allowing you to add up to 8 sensors to a single receiver or multiple receivers for broader coverage.

Figure 3.3: Easily Expandable System

4. Operasyon

This section details how to operate your Wuloo Solar Driveway Alarm System, including adjusting settings for the sensor and receiver.

4.1 Anviwònman Capteur

• ON/OFF: Press and hold the ON/OFF button on the sensor for 3 seconds to turn it on or off.
• Mòd travay: The sensor has 4 work modes: Light and Alarm Sound, Light Flash Only, Alarm Sound Only, and Mute (no sound, no flash). Select the desired mode using the dedicated button on the sensor.
• Melody Setting: Press the melody button on the sensor to cycle through 12 different melodies.
• Ajisteman sansiblite: The sensor features a 3-level sensitivity switch (L/M/H). Adjust this setting to optimize detection and reduce false alarms from small animals or environmental factors like leaves.

Anviwònman reseptè 4.2

• Seleksyon Chime: The receiver offers 16 different chimes. You can set a unique chime for each paired sensor (e.g., 'sensor one', 'sensor two' melodies). Enter pairing mode to set specific melodies for different sensors.
• Ajisteman Volim: The receiver has 4 volume levels, including a mute level. Use the volume button to adjust the sound output.

5. Antretyen

Proper maintenance ensures the long-term performance and reliability of your Wuloo Solar Driveway Alarm System.

• Panèl solè: Regularly check the solar panel on the sensor for dirt, dust, or debris. Clean it gently with a soft, damp cloth to ensure efficient charging.
• Lavi batri: The sensor's rechargeable battery is designed to last up to 24 months on a full charge. Ensure the sensor receives adequate sunlight to maintain battery levels. If the sensor is in a shaded area, occasional manual charging via the Type-C cable may be necessary.
• Pwoteksyon move tan: The sensor is weatherproof and designed to withstand rain and snow. However, avoid submerging the unit in water.
• Netwayaj jeneral: Wipe down both the sensor and receiver with a dry or slightly damp cloth as needed to keep them clean. Do not use harsh chemicals or abrasive cleaners.

Figure 5.1: Solar Charging and Weatherproof Design

NAN. Depanaj

If you encounter issues with your Wuloo Solar Driveway Alarm System, refer to the following common problems and solutions:

7. Espesifikasyon

Detailed technical specifications for the Wuloo Solar Driveway Alarm System.

• Mak: Wuloo
• Nimewo Modèl: WUL-MTY0102-1T1
• Koulè: Nwa
• Sous pouvwa: Solar Powered (Sensor), 110 Volts AC (Receiver)
• Pwa atik: 0.35 Kilogram (apeprè 12.3 ons)
• Ranje siyal maksimòm: 1/2 Mile (approx. 800 meters) in open area
• Maksimòm Ranje Deteksyon: 25 pye (apeprè 7.6 mèt)
• Kalite montaj: Mi mòn
• Battery Type (Sensor): Lithium Polymer (LiPo) rechargeable battery (included)
• Battery Life (Sensor): Jiska 24 mwa sou yon chaj konplè
• Aparèy konpatib: Light, Security System, Smart Home Hub
• Itilizasyon Rekòmande: Andedan kay la / Deyò
• Dimansyon pwodwi: 5.12 x 3.31 x 5.08 inches (Sensor and Receiver dimensions vary slightly)

8. Garanti ak sipò

Wuloo is committed to providing high-quality FM wireless products and excellent customer service. With over 20 years of experience in designing and manufacturing wireless technology, Wuloo stands behind its products.

Wuloo offers a 'Love it or refund' promise, ensuring customer satisfaction. For any questions, technical assistance, or support needs, please refer to the contact information provided with your product packaging or visit the official Wuloo brand store online.

We are dedicated to making your life safer and more convenient.