1. Pwodwi souview
The KISLOT Wood Bed Frame with Headboard is designed to provide a comfortable and stylish foundation for your mattress. Featuring a sturdy wooden frame, upholstered headboard, and robust slat support system, this bed frame eliminates the need for a box spring. It is crafted with attention to detail, ensuring durability and ease of assembly.

Figi 1.1: Konplè view of the assembled KISLOT Wood Bed Frame with Headboard in Oat color.
2. Enfòmasyon sou Sekirite
- Asire w tout konpozan yo prezan epi yo pa domaje anvan ou kòmanse asanblaj la.
- Monte ankadreman kabann lan sou yon sifas mou epi pwòp pou evite reyur.
- Pa sere vis yo twòp pandan asanblaj la pou evite domaje bwa a.
- Tcheke tout vis ak boulon yo regilyèman pou asire yo rete sere.
- Pa depase limit pwa maksimòm lan ki se 800 liv.
- Kenbe ti pati yo lwen timoun yo pandan asanble a.
3. Enstalasyon ak Asanble
Assembly of the KISLOT bed frame is designed to be straightforward, typically taking about 30 minutes with the included mini ratchet wrenches. Follow the steps below for proper setup.
3.1. Debalaj ak Idantifikasyon Konpozan
Carefully unpack all components and lay them out on a clean, soft surface. Verify that all parts listed in the instruction manual are present and undamaged.

Figi 3.1: Plis paseview of bed frame components and hardware.
3.2. Asanble ankadreman
Begin by assembling the main frame components. Connect the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not fully tighten until all major components are in place.
3.3. Slat Installation
Once the main frame is assembled, install the wooden slats. The bed frame features 16 internal slats for optimal support. Lay each slat across the support beams and secure them as indicated in the detailed instructions. The thickened hardwood slats offer extra stability and eliminate the need for a box spring.

Figi 3.2: Close-up view of wooden slats being installed into the bed frame.

Figure 3.3: Detail of the thickened hardwood slats providing mattress support.
3.4. Leg Attachment and Final Tightening
Attach the solid wood cone-shaped legs to the frame. Ensure the extra 4 central support legs are also securely attached. Once all components are in place, go back and fully tighten all screws and bolts using the mini ratchet wrenches. Felt sponge pads are pre-applied to the legs to protect your floors and reduce noise.

Figure 3.4: Detail of a bed leg attachment point.

Figure 3.5: Close-up of the felt sponge pads on the bed legs, designed to protect floors and reduce noise.
4. Operasyon ak Itilizasyon
The KISLOT bed frame is designed for optimal comfort and support. Place your mattress directly onto the wooden slats; no box spring is required. The embedded design of the bed frame helps prevent the mattress from slipping out.
4.1. Konpatibilite Matla
This bed frame is compatible with full-size mattresses. For optimal support and aesthetic, a mattress thickness between 8 and 14 inches is recommended.

Figure 4.1: Diagram illustrating the recommended mattress thickness range (8-14 inches) for the bed frame.
4.2. Under-Bed Storage
The bed frame offers 9.8 inches of clearance underneath, providing convenient storage space. This height also allows for easy cleaning, including the use of robot vacuums.

Figure 4.2: Image demonstrating the 9.8-inch under-bed clearance, ideal for storage and cleaning.
5. Antretyen
Proper maintenance will ensure the longevity and appearance of your KISLOT bed frame.
5.1. Cleaning the Upholstered Headboard
The upholstered headboard is made from cotton and linen fabric. For cleaning, netwayaj à sec sèlman is recommended to maintain its quality and appearance.

Figure 5.1: Close-up of the upholstered headboard fabric texture.
5.2. Cleaning the Wooden Frame
Siye ankadreman an bwa a ak yon twal mou,amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the wood finish.
5.3. Chèk regilye
Periodically inspect all connections, including bolts and screws, to ensure they are tight. Retighten if necessary to maintain the bed frame's stability and prevent squeaking.
NAN. Depanaj
This section addresses common issues you might encounter with your bed frame.
6.1. Bri ki fè bri
- Kòz: Koneksyon ki lach oswa friksyon ant pati yo.
- Solisyon: Check and tighten all bolts and screws. Ensure the felt sponge pads on the legs are intact and properly positioned to minimize noise.
6.2. Mattress Slipping
- Kòz: Mattress not properly seated or bed frame not level.
- Solisyon: Ensure the mattress is centered on the slats. The bed end embedded design is intended to prevent slipping. Verify the bed frame is on a flat, level surface.
6.3. Parts Not Fitting During Assembly
- Kòz: Misalignment, damaged parts, or incorrect orientation.
- Solisyon: Double-check the assembly instructions and diagrams to ensure parts are oriented correctly. If a part appears bent or damaged, contact customer support for assistance. Do not force parts together.
7. Espesifikasyon
| Karakteristik | Deskripsyon |
|---|---|
| Mak | KISLOT |
| Nimewo Modèl | M003 |
| Gwosè | Plen |
| Koulè | Avwàn |
| Dimansyon pwodwi | 80.12"L x 58.27"L x 47.24"H |
| Kalite twal amebleman | Koton, twal fin blan |
| Limit Pwa | 800 liv |
| Pwa atik | 73.7 liv |
| Asanble obligatwa | Wi |
| Karakteristik espesyal | Upholstered Headboard, No Box Spring Needed |
| Konpozan ki enkli | Tèt kabann, Ankadreman, Lat, Materyèl |

Figure 7.1: Detailed dimensions for the Full Size KISLOT Bed Frame.
8. Garanti ak sipò
For specific warranty information regarding your KISLOT Wood Bed Frame, please refer to the documentation included with your purchase or contact KISLOT customer support directly. Protection plans may also be available for purchase.
For further assistance, troubleshooting, or to inquire about replacement parts, please visit the official KISLOT Store or contact their customer service department.





