Manyèl Itilizatè Tèmomèt Enfrawouj San Kontak CONTEC TP500(LED)

1. Entwodiksyon

This manual provides essential instructions for the safe and effective operation of the CONTEC TP500(LED) Non-Contact Infrared Thermometer. This device is designed for accurate and rapid temperature measurement without physical contact, suitable for infants, children, and adults. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: CONTEC TP500(LED) Non-Contact Infrared Thermometer.

2. Enfòmasyon sou Sekirite

• Pa plonje tèmomèt la nan dlo oswa lòt likid.
• Keep the device away from direct sunlight, extreme temperatures, and high humidity.
• Evite jete aparèy la oswa soumèt li a gwo enpak.
• Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte sèvis kliyan si ou bezwen sèvis.
• Kenbe pil yo lwen timoun yo. Jete pil ize yo byen dapre règleman lokal yo.
• This device is intended for household use. Consult a medical professional for any health concerns or persistent fever.
• Ensure the measurement probe is clean before each use to maintain accuracy and hygiene.

3. Pwodwi Features

• Mezi ki pa gen kontak: Measures temperature without physical contact, reducing discomfort and potential cross-contamination.
• Precise Infrared Probe: Utilizes an advanced infrared sensor for accurate and rapid temperature readings within 1 second.
• Gwo ekspozisyon dirije: Clear and easy-to-read LED display, visible even in low light conditions or at night.
• Fonksyon memwa: Stores up to 30 groups of measurement values, allowing for easy tracking of temperature trends.
• Fever Warning: Intelligent sound and light prompts indicate different temperature levels (normal, low fever, high fever) for quick assessment.
• Otomatik fèmen: Device automatically turns off after 5 seconds of inactivity to conserve battery life.
• Konvèsyon Inite: Easily switch between Celsius (°C) and Fahrenheit (°F) as preferred.
• Endikatè batri ki ba: Avèti itilizatè a lè pil yo bezwen chanje.

Figure 2: Understanding the display indicators.

4. Enstalasyon

4.1 Enstalasyon batri

1. Jwenn kouvèti konpatiman pil la sou manch tèmomèt la.
2. Slide or open the cover according to the indicator marks.
3. Insert two "AAA" batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Fèmen kouvèti konpatiman batri a byen fèm jiskaske li fè yon klik an plas.

Note: The package does not contain batteries. Please use two new "AAA" batteries for optimal performance.

5. Operasyon Enstriksyon

5.1 Pran yon mezi

1. Ensure the thermometer is clean and dry.
2. Press the power button to turn on the device. The LED display will light up.
3. Position the thermometer 1-3 cm (approximately 0.4-1.2 inches) from the center of the forehead. Ensure there is no hair, sweat, or cosmetics obstructing the measurement area.
4. Press the measurement button (trigger) once. The temperature reading will appear on the LED display within 1 second.
5. The device will provide sound and light prompts based on the measured temperature.
6. The measurement will be automatically saved to the device's memory.

Figure 3: Proper measurement distance and placement on the forehead.

5.2 Chanje ant Sèlsiyis (°C) ak Farennayt (°F)

1. Vire tèmomèt la.
2. Long press the "M" (Memory) button to enter the memory interface.
3. While in the memory interface, long press and hold the "M" button again to enter the setting mode.
4. Press the "M" button briefly to toggle between Celsius (°C) and Fahrenheit (°F).
5. Once your desired unit is displayed, release the button. The setting will be saved automatically.

Figure 4: Celsius and Fahrenheit unit conversion.

5.3 Fonksyon memwa

The CONTEC TP500(LED) thermometer automatically stores the last 30 temperature readings. To view mezi sot pase yo:

1. Vire tèmomèt la.
2. Briefly press the "M" (Memory) button to cycle through the stored readings. Each press will display the next stored value.

Figure 5: Memory function displaying temperature trends.

6. Antretyen

6.1 Netwayaj

• Siye kò tèmomèt la avèk yon twal mou, yon ti kras damp twal.
• For the infrared probe, gently clean with a cotton swab lightly moistened with 70% isopropyl alcohol. Allow it to dry completely before use.
• Do not use abrasive cleaners, solvents, or immerse the device in water.

6.2 Depo

• Store the thermometer in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
• If the device will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and potential damage.

NAN. Depanaj

8. Espesifikasyon

• Modèl: TP500
• Metòd mezi: Enfrawouj san kontak
• Distans Mezi: 1-3 cm
• Ekspozisyon: dirije
• Depo memwa: 30 gwoup
• Otomatik fèmen: 5 segonn
• Sous pouvwa: 2 x AAA pil (pa enkli)
• Lavi batri: Apeprè 600 mezi
• Karakteristik espesyal: Low Battery Indicator, Fever Warning
• Materyèl: Plastik
• Koulè: Blan
• Dimansyon: Approximately 162mm (Height) x 113mm (Length) x 51mm (Width)

Figi 6: Dimansyon pwodwi a.

9. Garanti ak sipò

The CONTEC TP500(LED) Non-Contact Infrared Thermometer comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding the product, please contact CONTEC customer service. You can typically find contact information on the product packaging or through the official CONTEC websit.

For purchases made on Amazon, you may also contact the seller, CONTEC, directly through your Amazon order history for assistance.