Manyèl Itilizatè Twous Devlopman M5Stack ATOM Lite ESP32 IoT a

2. Pake kontni

The M5Stack ATOM Lite package includes the following items:

• 1 x ATOM Lite ESP32 IoT Development Kit

Figure 3: The M5Stack ATOM Lite development kit as packaged for retail.

3. Materyèl Plis paseview

The ATOM Lite features several integrated components and interfaces for diverse applications.

Figure 4: Diagram illustrating the key components and interfaces of the ATOM Lite, including the IR-LED, RGB LED, internal button (G39), Reset button, external pins, USB-C port, and HY2.0-4P connector.

Konpozan kle:

• ESP32-PICO Microcontroller: Integrates Wi-Fi and Bluetooth capabilities.
• USB-C pò: For power supply and data communication (programming).
• HY2.0-4P Connector: A 4-pin connector for external modules and sensors.
• Pins GPIO: Six general-purpose input/output pins for connecting peripherals.
• RGB LED (G27): A programmable full-color LED.
• Infra-Red (IR) LED: For infrared communication.
• Built-in Button (G39): A user-programmable button.
• Bouton Reyajiste: To restart the device.
• M2 Screw Hole: For mounting purposes.

Figi 5: Top view of the ATOM Lite, detailing the pinout for the HY2.0-4P connector and external GPIOs, including voltage (3V3, 5V) and ground (G) connections.

4. Pou kòmanse (Enstalasyon)

To begin using your M5Stack ATOM Lite, follow these steps:

4.1. Limen ak Koneksyon Inisyal

1. Connect the ATOM Lite to your computer using a USB-C cable. The device will power on automatically.
2. Upon connection, the RGB LED may illuminate, indicating power.

Figure 6: The ATOM Lite connected to a power source via a USB-C cable, with its RGB LED active.

4.2. Enstalasyon chofè

The ATOM Lite uses a standard USB-to-Serial chip (typically CP2104 or CH9102F). Most modern operating systems will automatically install the necessary drivers. If the device is not recognized, you may need to manually install drivers:

• For Windows/macOS/Linux, search for 'CP2104 driver' or 'CH9102F driver' online and download from the official Silicon Labs or WCH websit.

4.3. Enstalasyon Anviwònman Devlopman

The ATOM Lite supports various development platforms:

• Arduino IDE: Install the ESP32 board package in the Arduino IDE. Refer to the official ESP32 Arduino documentation for detailed instructions.
• MicroPython: Flash MicroPython firmware onto the device. Tools like `esptool.py` can be used for this.
• UI-FLOW: M5Stack's block-based programming platform. Download the UI-FLOW desktop IDE or use the web vèsyon.
• ESPHome: For Home Assistant integration, visit esphome.io for pre-built projects and flashing instructions.

5. Operasyon debaz

5.1. Using the Built-in Button

The ATOM Lite includes a programmable button (GPIO39). This button can be used for various user inputs, such as triggering events, changing modes, or confirming actions within your programmed application.

5.2. Controlling the RGB LED

The integrated RGB LED (connected to GPIO27) is a versatile indicator. It can be programmed to display different colors and patterns to convey status, alerts, or other visual feedback.

5.3. Infra-Red (IR) Communication

The IR LED allows the ATOM Lite to send infrared signals, enabling control of IR-compatible devices such as televisions, air conditioners, or other consumer electronics. Programming libraries are available for encoding and decoding IR protocols.

6. Konekte periferik

6.1. HY2.0-4P Interface

The HY2.0-4P connector provides a convenient interface for connecting M5Stack's Grove-compatible modules and other peripherals. This connector typically includes power (5V), ground, and two data lines (e.g., I2C, UART, or digital I/O).

6.2. External GPIOs

The ATOM Lite exposes additional GPIO pins (G19, G22, G23, G26, G32, G33) for direct connection to custom circuits, sensors, and actuators. Refer to the pinout diagram (Figure 5) for specific pin assignments and capabilities.

7. Antretyen ak Swen

• Kenbe aparèy la sèk epi lwen imidite.
• Evite ekspoze aparèy la nan tanperati ekstrèm.
• Handle with care to prevent physical damage to the board and connectors.
• Clean the device with a soft, dry cloth if necessary. Do not use liquid cleaners.

NAN. Depanaj

• Aparèy la pa rekonèt pa òdinatè a: Ensure USB-C cable is functional. Install appropriate USB-to-Serial drivers (CP2104/CH9102F) if not automatically detected.
• Program upload failure: Verify correct board and port selection in your IDE. Ensure drivers are installed. Try pressing the Reset button before uploading.
• Pwoblèm koneksyon Wi-Fi: Check Wi-Fi credentials in your code. Ensure the device is within range of the Wi-Fi network.
• Konpòtman inatandi: Review your code for logical errors. Ensure all external connections are correct and secure.

9. Espesifikasyon

Figi 7: Anba view of the ATOM Lite, showing regulatory markings including the FCC ID.

10. Enfòmasyon sou Garanti

For detailed warranty information, please refer to the official M5Stack website or contact their customer support directly. Warranty terms and conditions may vary based on region and point of purchase.

11. Sipò ak Resous

For further assistance, technical documentation, and community support, please visit the official M5Stack website. You can find tutorials, examples, and forums to help with your development projects.

• Official M5Stack Websit: https://m5stack.com/
• M5Stack Documentation: Refer to the product-specific documentation available on the M5Stack websit.