Antec CX700 RGB Elite Mid Tower PC Gaming Case User Manual

1. Entwodiksyon

This manual provides essential information for the proper installation, operation, and maintenance of your Antec CX700 RGB Elite Mid Tower PC Gaming Case. Please read these instructions carefully before beginning assembly to ensure optimal performance and longevity of your system components.

Figure 1: Antec CX700 RGB Elite Mid Tower PC Gaming Case, showcasing its panoramic tempered glass view and internal RGB fans.

2. Karakteristik kle

• Panoramik 270° View: Seamless 4mm steel-tempered glass on the left and front panels provides an unobstructed view nan konpozan entèn yo.
• Tool-Free Panels: Front and side panels feature a fixing stud design for easy assembly and disassembly, reducing the risk of glass breakage.
• Vertical Cooling with Massive Air Intake: Bottom-up vertical airflow is facilitated by mesh on the lower front, lower left, and right sides for efficient heat dissipation.
• Pre-installed RGB Fans: Equipped with 9 fan positions and 5 pre-installed reverse fans for enhanced airflow and aesthetic appeal.
• Sipò pou refwadisman dlo: Supports simultaneous installation of a 360mm radiator on top and a 240mm radiator on the side. Note: Installing a 240mm side radiator limits graphics card length to 270mm.
• EVA PSU Cushion Pads: Anti-vibration foams on the power supply mount position protect hardware from resonance.
• Reusable PCI Slot Covers: Full reusable PCI slot covers for an optimal build experience.
• Ample Cable Management: 23mm of space behind the motherboard tray ensures a neat and organized PC build.

3. Enstalasyon ak Konpozan

3.1 Prekosyon sekirite

• Toujou dekonekte ekipman pou kouran an nan priz miray la anvan ou enstale oswa retire nenpòt konpozan.
• Mete yon braslè ponyèt anti-estatik pou anpeche domaj akòz dechaj elektwostatik (ESD) sou konpozan sansib yo.
• Handle tempered glass panels with care to avoid breakage. Place them on a soft, flat surface.

3.2 Prepare Ka a

1. Depake bwat la: Retire bwat la nan anbalaj li avèk prekosyon.
2. Retire Panno Side: Locate the fixing studs on the rear of the case. Gently pull the tempered glass side panels outwards to detach them. Place them safely aside.
3. Aksè Enteryè: Remove any internal packaging materials.

3.3 Enstalasyon mèr

1. Enstale Pwoteksyon E/S la: If your motherboard requires a separate I/O shield, install it into the rear I/O opening of the case.
2. Enstale Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (Micro ATX, ATX, E-ATX). The CX700 RGB Elite supports various form factors.
3. Monte Kat Mèb: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.

3.4 CPU, RAM, and Cooler Installation

1. CPU: Install your CPU onto the motherboard socket according to the motherboard manufacturer's instructions.
2. RAM: Install your RAM modules into the appropriate DIMM slots on the motherboard.
3. CPU Cooler: Install your CPU cooler (air or liquid) onto the CPU. The case supports up to a 360mm radiator on top and a 240mm radiator on the side.

3.5 Enstalasyon Kat Grafik (GPU)

1. Retire kouvèti plas PCI yo: Remove the necessary reusable PCI slot covers from the rear of the case to accommodate your graphics card.
2. Install GPU: Insert your graphics card into the primary PCIe slot on the motherboard. Secure it with the thumbscrew or latch.
3. Konekte pouvwa: Connect the appropriate PCIe power cables from your power supply to the graphics card.

3.6 Power Supply (PSU) and Storage Installation

1. Enstale PSU: Mount your power supply in the bottom-mount position, securing it with screws from the rear of the case. Ensure EVA PSU cushion pads are correctly positioned.
2. Enstale Disk Depo yo: Install your 2.5" SSDs or 3.5" HDDs into the designated drive bays.

3.7 Jesyon kab

1. Konekte Kab Ka yo: Connect the front panel I/O cables (USB, audio, power, reset, RGB) to the appropriate headers on your motherboard.
2. Route Câbles: Utilize the 23mm cable management space behind the motherboard tray and the various cable routing cutouts to organize all power and data cables. Use zip ties or Velcro straps (not included) for a clean look.

3.8 Final Asanble

1. Reinstall Panels: Carefully reattach the tempered glass side panels, ensuring they snap securely into place.

4. Operasyon Enstriksyon

4.1 Power On/Off

• Peze a Bouton pouvwa on the top panel to turn your PC on or off.
• A Bouton Reyajiste is also available for system restarts.

4.2 Kontwòl ekleraj RGB

The Antec CX700 RGB Elite comes with 5 pre-installed RGB fans. The RGB lighting can typically be controlled via:

• Lojisyèl kat manman: Connect the case's RGB cables to your motherboard's ARGB headers (if available) and use the motherboard manufacturer's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to customize lighting effects.
• Integrated Controller (if applicable): Some cases may include a dedicated RGB control button or hub. Refer to the specific case documentation for details on controlling pre-installed fans.

5. Antretyen

5.1 Netwayaj Filtè Pousyè

Regularly clean the dust filters to maintain optimal airflow and cooling performance.

1. Locate Filters: The case features mesh panels on the lower front, lower left, and right sides, which act as dust filters.
2. Retire filtè yo: Gently detach the mesh filters.
3. Netwaye: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with mild soap and water, then ensure they are completely dry before reinstallation.
4. Réinstaller: Place the clean, dry filters back into their respective positions.

5.2 Netwayaj jeneral

• Sèvi ak yon mou, damp cloth to wipe down the exterior surfaces of the case. Avoid abrasive cleaners.
• For tempered glass panels, use a glass cleaner and a microfiber cloth to prevent streaks.
• Periodically inspect internal components for dust buildup and clean with compressed air as needed.

NAN. Depanaj

6.1 Pa gen pouvwa

• Ensure the power supply is switched on and properly connected to the wall outlet.
• Verify all power cables from the PSU are securely connected to the motherboard and components.
• Tcheke koneksyon bouton pouvwa a sou panèl devan an ak kat manman an.

6.2 Fanatik yo pa vire / RGB pa fonksyone

• Confirm that all fan power cables are correctly connected to the motherboard fan headers or a fan hub.
• Check that RGB cables are properly connected to the motherboard's ARGB headers or a dedicated RGB controller.
• If using motherboard software, ensure it is installed and configured correctly.

6.3 Overheating Issues

• Clean all dust filters and internal components to improve airflow.
• Asire w ke vantilatè yo oryante kòrèkteman pou yon sikilasyon lè optimal (admisyon/echapman).
• Verify CPU cooler and GPU fans are functioning properly.

7. Espesifikasyon

8. Garanti ak sipò

For warranty information, technical support, or further assistance, please refer to the official Antec websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou pou reklamasyon garanti.