Entwodiksyon
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Feit Electric Wi-Fi Smart Dimmer Light Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The product packaging for the Feit Electric Smart Dimmers, highlighting key features such as Wi-Fi connectivity, remote access, voice control, and scheduling. It also states the requirement for a neutral wire.
Enstalasyon ak Enstalasyon
Prekosyon Sekirite
- Always turn off power at the circuit breaker before beginning any electrical work.
- Si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an, konsilte yon elektrisyen kalifye.
- Ensure your electrical box has a neutral wire. This dimmer switch requires a neutral wire for operation.
Identifying a Neutral Wire
Before installation, verify the presence of a neutral wire in your switch box. A neutral wire is typically white. If no neutral wire is present, this dimmer switch will not function.
Image: A diagram illustrating how to identify a neutral wire (white wire) within a standard electrical switch box. It shows the dimmer switch connected to line, load, ground, and neutral wires.
Enstriksyon fil elektrik
The Feit Electric Smart Dimmer supports both single-pole and 3-way wiring configurations. Refer to the diagrams below for appropriate connections.
Image: Diagrams illustrating various wiring configurations for the smart dimmer, including single dimmer, two dimmers, switch and dimmer, and multiple dimmers, along with multi-gang installation examples.
- Fèmen kouran nan disjoncteurs a.
- Retire plak miray ki deja egziste a ak switch.
- Identify the Line, Load, Neutral, and Ground wires.
- Connect the wires from the Feit Electric Smart Dimmer to the corresponding wires in your electrical box using wire nuts.
- Carefully push the wires back into the electrical box and secure the dimmer switch with screws.
- Tache nouvo plak miray la.
- Retabli pouvwa nan disjoncteurs a.
Wi-Fi Pairing
After installation, pair your dimmer switch with the Feit Electric app for smart control. The switch operates on a 2.4GHz Wi-Fi network.
- Download the Feit Electric app from your device's app store.
- Kreye yon kont oswa konekte.
- Follow the in-app instructions to add a new device. The power indicator light on the dimmer will blink during pairing mode.
Enstriksyon Operasyon
Manyèl kontwòl
Image: A detailed diagram of the Feit Electric Smart Dimmer switch, labeling the Power ON/OFF Switch, Dim (+) and Dim (-) buttons, Air Gap Switch, Light Level Indicator Lights, and Power Indicator Light.
- Pouvwa ON / OFF switch: Press the main button to turn lights on or off.
- Dim (+) / Brighten Lights: Press the upper side button to increase brightness. Hold for 2 seconds for stepless dimming.
- Dim (-) / Lower Lights: Press the lower side button to decrease brightness. Hold for 2 seconds for stepless dimming.
- Light Level Indicator Lights: Five LEDs indicate the selected brightness level (LED 1: 1%-20%, LED 2: 21%-40%, LED 3: 41%-60%, LED 4: 61%-80%, LED 5: 81%-100%).
- Limyè endikatè pouvwa: Blinks during pairing mode (lasts three minutes). Solid light indicates the unit is paired or after 3 minutes if no Wi-Fi connection.
- Chanjman Air Gap: Pull out the small tab at the bottom to completely cut power to the light fixture for bulb replacement or maintenance.
Karakteristik Kontwòl Entelijan
Imaj: Yon plis paseview of the smart features of the dimmer switch, including Remote Access, Voice Control (compatible with Alexa and Google Assistant), Scheduling & Timer, and Grouping, shown alongside the dimmer and a smartphone app interface.
- Aksè Remote: Control your lights from anywhere using the Feit Electric app.
- Kontwòl vwa: Compatible with Amazon Alexa and Google Assistant. Use voice commands to turn lights on/off or adjust brightness (e.g., "Alexa, dim the kitchen lights to 20%").
- Planifikasyon ak Minutè: Set schedules for your lights to turn on/off or dim at specific times.
- Gwoupman: Group multiple Feit Electric smart devices together for simultaneous control.
Smooth Dimmability
Image: A visual representation of the smooth dimmability feature, showing five stages of light intensity from 1%-20% to 81%-100% brightness.
The dimmer provides smooth transitions across its dimming range, from 1% to 100% brightness. Ensure compatible dimmable LED bulbs are used for optimal performance.
Antretyen
The Feit Electric Smart Dimmer Light Switch requires minimal maintenance.
- Netwayaj: To clean the switch and wall plate, wipe with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan. Asire w ke kouran an koupe anvan ou netwaye.
- Anpoul konpatibilite: For best dimming performance and to prevent flickering, use only dimmable LED bulbs.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Dimmer not responding / No power | No neutral wire; Power off at breaker; Loose wiring. | Verify neutral wire presence. Check circuit breaker. Re-check wiring connections. |
| Lights flickering or buzzing | Non-dimmable bulbs; Incompatible dimmable bulbs; Overloaded circuit. | Ensure all bulbs are dimmable LEDs. Try different brand of dimmable LED bulbs. Check total wattage does not exceed dimmer's maximum rating. |
| Cannot connect to Wi-Fi / App issues | Incorrect Wi-Fi band (not 2.4GHz); Incorrect pairing procedure; Weak Wi-Fi signal. | Ensure your router is broadcasting a 2.4GHz network. Follow app pairing instructions carefully. Move closer to router or improve Wi-Fi signal. |
| 3-way/4-way wiring not working | Incorrect wiring for multi-way setup; Defective switch. | Review wiring diagrams for 3-way/4-way configurations. Ensure only one smart dimmer is on the line side for 3-way, or two smart dimmers for specific 3-way setups. Consult an electrician if issues persist. |
Espesifikasyon
Image: A detailed specification sheet for the dimmer switch, including physical dimensions, setup requirements, compatible wiring types, gang installation options, voltage, ak maksimòm wattage.
- Nimewo Modèl: B0D4YFCTHV
- Mak: Feit elektrik
- Product Dimensions (Switch): 4.6 in (H) x 2.8 in (W) x 1.7 in (D)
- Pwa pwodwi: Approximately 1.3 Pounds (for 3-pack)
- Kondisyon pou konfigirasyon: Neutral Wire, 2.4GHz Wi-Fi
- Compatible Wiring: Single Wiring, 3-WAY (1 smart dimmer on circuit), 3-WAY (2 smart dimmers on same circuit)
- Compatible Gang Installation: 1-Gang, 2-Gang, 3-Gang
- Voltage: 120 Volt, 60Hz, 15 Amp Max
- Max watage: 450 Wattage (Incandescent/Halogen), 150 Watt Dimmable LED
- Mòd operasyon: Otomatik
- Kalite kontak: Nòmalman Louvri
- Kalite konektè: Tèminal vis
- Tèminal: Vis
- Kalite actuator: Levye charnyèr
- Kontakte materyèl: Kwiv
- Evalyasyon pwoteksyon entènasyonal: IP20
Enfòmasyon sou Garanti
Specific warranty details for the Feit Electric Wi-Fi Smart Dimmer Light Switch are typically provided with the product packaging or available on the official Feit Electric websit la. Tanpri gade resous sa yo pou jwenn kondisyon garanti ki pi egzak ak ajou yo.
Sipò
Pou plis asistans, sipò teknik, oubyen pou view frequently asked questions, please visit the official Feit Electric websit entènèt la oubyen kontakte depatman sèvis kliyan yo. Anjeneral, ou ka jwenn enfòmasyon pou kontakte yo sou anbalaj pwodwi a oubyen sou fichye manifakti a. websit.
