1. Entwodiksyon
Thank you for choosing the Jectse High-Precision Baby Bath Thermometer. This device is specifically designed to ensure the optimal and safe water temperature for your baby's bath, providing peace of mind for parents. Its high-precision detection technology, portability, and quick response make it an essential tool for newborn care.
Image: The Jectse JH-820 Baby Bath Thermometer, featuring a cute grey elephant design with a clear digital temperature display on its belly.
2. Enfòmasyon sou Sekirite
- Always test the water temperature with your hand before placing the baby in the bath, even after using the thermometer.
- Do not immerse the thermometer in water deeper than recommended or for extended periods beyond bath time.
- Kenbe pil yo pa rive jwenn timoun yo. Si vale, chèche swen medikal imedya.
- Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte sèvis kliyan si gen pwoblèm.
- Asire w ke lòj batri a byen fèmen pou anpeche dlo antre.
3. Pake kontni
Lè w ap ouvri pake a, tanpri verifye si tout bagay sa yo ladan l:
- 1 x Jectse Baby Bath Thermometer (JH-820)
- 2 x LR44 Button Batteries (pre-installed or separate)
- 1 x Small Screwdriver (for battery compartment)
- 1 x Manyèl Enstriksyon Anglè (dokiman sa a)
Image: All items included in the package: the elephant thermometer, two button batteries, and a screwdriver.
4. Enstalasyon
4.1. Enstalasyon batri
The thermometer requires 4 LR44 button batteries. These may be pre-installed or provided separately. If separate, please follow these steps:
- Jwenn lòj batri a sou do tèmomèt la.
- Use the provided screwdriver to unscrew the small screws securing the battery cover.
- Ak anpil atansyon retire kouvèti a.
- Insert the 4 LR44 button batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Replace the battery cover and securely fasten the screws to ensure a watertight seal.
Image: The back of the thermometer, illustrating the battery compartment and screw locations for battery replacement.
5. Operasyon Enstriksyon
Using your Jectse Baby Bath Thermometer is simple and straightforward:
- Aktive: The thermometer automatically activates when placed in water. The digital display will light up and show the current water temperature.
- Mezire Tanperati: Place the thermometer in the baby's bath water. Allow it to float freely for a few seconds to get an accurate reading. The high-precision sensor will quickly display the temperature.
- Ajisteman Tanperati: Based on the reading, adjust the water temperature as needed. The ideal bath temperature for babies is typically between 37°C and 38°C (98.6°F and 100.4°F).
- Dezaktivasyon: The thermometer will automatically turn off after being removed from water for a period of time, conserving battery life.
Image: The thermometer in use, floating in water and displaying the temperature, demonstrating its function.
6. Antretyen
- Netwayaj: After each use, wipe the thermometer with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Depo: Store the thermometer in a dry place at room temperature when not in use. Avoid direct sunlight or extreme temperatures.
- Ranplasman batri: When the display becomes dim or the thermometer stops responding, it's time to replace the batteries. Refer to Section 4.1 for battery installation instructions.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Tèmomèt la pa limen. | Pil yo mouri oswa yo mal enstale. | Replace batteries, ensuring correct polarity. Refer to Section 4.1. |
| Lekti tanperati ki pa kòrèk. | Sensor not fully submerged or air bubbles around sensor. | Ensure the thermometer is fully floating and submerged correctly. Gently swirl the water. |
| Ekran an fèb oswa li ap tranble. | Ba pouvwa batri. | Ranplase pil. |
| Water inside the battery compartment. | Battery cover not securely fastened. | Immediately remove batteries, dry the compartment thoroughly, and ensure the cover is tightly sealed when reassembling. If damage persists, discontinue use. |
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Modèl | JH-820 (Jectseamz3b8dto7-13) |
| Materyèl | ABS |
| Kalite batri | 4 x LR44 Button Cell (320 mAh) |
| Pwa | Apeprè. 122 g (4.3 oz) |
| Dimansyon (Apeprè) | 105mm (H) x 95mm (W) x 49mm (D) / 4.1in (H) x 3.7in (W) x 1.9in (D) |
| Peyi orijin | Lachin |
Image: Dimensional diagram of the thermometer, indicating its height, width, and depth.
9. Garanti ak sipò
Jectse products are manufactured with high quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the seller's policy on the platform where you purchased this product or visit the official Jectse brand store.
Jectse Brand Store: Vizite Magazen an
Tanpri konsève prèv acha ou a pou nenpòt reklamasyon garanti.
