DIGITEN WTC100 Pro Wireless Thermostat Instruction Manual

Entwodiksyon

The DIGITEN WTC100 Pro Wireless Thermostat provides convenient and precise temperature control for various heating and cooling appliances. This manual will guide you through the setup, operation, and maintenance of your new thermostat to ensure optimal performance and comfort.

Pwodwi souview

The WTC100 Pro features an easy-to-use, non-programmable design with a remote control that includes a built-in, highly accurate temperature sensor. It supports both heating and cooling modes, automatically activating or deactivating connected devices to maintain your desired temperature. The large LCD screen with backlight ensures clear readability in various lighting conditions. Its plug-and-play functionality makes it simple to set up and operate.

The DIGITEN WTC100 Pro Wireless Thermostat system includes a remote control unit with a display and a plug-in receiver unit.

This image highlights the main features of the thermostat, including temperature unit switching, remote control capability, dual heating and cooling modes, a large LCD screen, and plug-and-play functionality.

Kontni pake

• Remote Controller x 1
• Reseptè x 1
• Montaj plak x 1
• Manyèl x 1

Enstalasyon

1. Enstalasyon batri

The remote control unit requires two AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, ensuring correct polarity. Close the compartment securely.

2. Enstalasyon Kontwolè a Distans

The remote controller can be placed on a flat surface using its integrated stand or mounted on a wall using the provided mounting plate and screws. Choose a location away from direct sunlight, drafts, or heat sources for accurate temperature readings.

The remote control can be placed on a surface or wall-mounted for convenience.

3. Plugging in the Receiver

Plug the receiver unit into a standard electrical outlet. Then, plug your heating or cooling appliance into the outlet on the receiver unit. Ensure the appliance is powered on and ready to receive commands from the thermostat.

Connect your appliance to the receiver unit, which then plugs into a wall outlet.

4. Initial Pairing (Automatic)

The remote controller and receiver are pre-paired at the factory. If re-pairing is needed, refer to the detailed instructions in the included manual.

Enstriksyon Operasyon

1. Selecting Temperature Unit (℃/℉)

To switch between Celsius (℃) and Fahrenheit (℉), press and hold the 'M' button on the remote control until the unit changes on the display.

2. Setting Operating Mode (Heat/Cool/Off)

Use the slide switch on the side of the remote control to select your desired operating mode: Chalè for heating appliances, Cool for cooling appliances, or Off to disable temperature control.

The remote control features a simple interface: slide the side switch to select heating or cooling mode, then use the '+' and '-' buttons to adjust the desired temperature.

3. Adjusting Target Temperature

Once the mode is selected, use the '+' and '-' buttons on the remote control to set your desired target temperature. The current temperature and set temperature will be displayed on the LCD screen.

4. Kontwòl otomatik

The remote control's built-in sensor continuously monitors the ambient temperature. When the current temperature deviates from your set target temperature, the remote sends a signal to the receiver to turn the connected appliance on or off, maintaining the desired climate.

Espesifikasyon

Depanaj

If you encounter issues with your DIGITEN WTC100 Pro Wireless Thermostat, please consider the following:

• No Display on Remote: Tcheke si pil AAA yo byen enstale epi yo gen ase chaj. Ranplase yo si sa nesesè.
• Aparèy la pa reponn: Ensure the receiver is properly plugged into a live outlet and the appliance is securely plugged into the receiver. Verify that the remote control is within range and not obstructed.
• Lekti tanperati ki pa kòrèk: Ensure the remote control is placed in a location free from direct heat sources, cold drafts, or direct sunlight, which can affect sensor accuracy.
• Re-paire: If the remote and receiver lose connection, refer to the full instruction manual for re-pairing procedures.

Antretyen

To ensure the longevity and optimal performance of your thermostat:

• Clean the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
• Replace the remote control batteries annually or when the low battery indicator appears on the display.
• Avoid exposing the units to extreme temperatures or humidity.

Garanti ak sipò

DIGITEN provides a one-year warranty for any product quality issues. For further assistance or inquiries, please contact DIGITEN customer support.