Manyèl Enstriksyon pou Distribitè Bwason Fwad Trip Tank RHINO DISBEF-3T

Entwodiksyon

Thank you for choosing the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and retain it for future reference.

Imaj: Devan view of the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser, showcasing its three clear tanks and stainless steel base with dispensing levers.

Enstriksyon Sekirite Enpòtan

• Li tout enstriksyon anvan ou itilize.
• Asire w ke ekipman pou pouvwa a koresponn ak espesifikasyon ki sou etikèt klasman an.
• Pa plonje aparèy la, kòd, oswa ploge nan dlo oswa lòt likid.
• Sipèvize timoun yo pou asire yo pa jwe ak aparèy la.
• Deploge nan priz lè yo pa itilize epi anvan netwaye.
• Pa opere nenpòt aparèy ki gen yon kòd oswa ploge ki domaje, oswa apre aparèy la fonksyone mal oswa li te domaje nan nenpòt fason.
• Sèvi ak sèlman atachman rekòmande pa manifakti a.
• Pa sèvi ak deyò.
• Pa kite kòd la pandye sou kwen yon tab oswa kontwa, oswa manyen sifas cho.
• Toujou mete aparèy la sou yon sifas ki estab ak nivo.
• Aparèy sa a fèt pou itilizasyon komèsyal.

Pwodwi konpozan

The RHINO DISBEF-3T dispenser consists of the following main components:

• Inite debaz: Contains the cooling system and electrical components, made of stainless steel.
• Beverage Tanks (x3): Transparent, food-grade polycarbonate tanks, each with an 18-liter capacity.
• Lids (x3): Covers for each beverage tank.
• Dispensing Levers (x3): "Push" type levers for controlled beverage flow.
• Drip Trays (x3): Removable trays located below each dispensing lever to catch spills.
• Agitation System: Fountain-type agitators within each tank to keep beverages mixed and chilled.

Image: An illustrative diagram highlighting key features of the dispenser, including triple tanks, polycarbonate construction, stainless steel cabinet, 680W power, and 18 liters per tank capacity.

Enstalasyon ak Enstalasyon

1. Debake: Retire dispansè a nan anbalaj li avèk prekosyon. Enspekte li pou wè si li gen nenpòt domaj.
2. Plasman: Place the dispenser on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit, especially at the rear and sides, to allow for proper heat dissipation from the cooling system.
3. Netwayaj: Before first use, thoroughly clean all removable parts (tanks, lids, drip trays, agitators) with mild soap and water. Rinse thoroughly and dry.
4. Asanble:
   • Insert the agitators into their respective positions within the base unit.
   • Place the clean beverage tanks onto the base unit, ensuring they are securely seated.
   • Attach the lids to the tanks.
   • Position the drip trays under each dispensing lever.
5. Koneksyon pouvwa: Plug the power cord into a grounded electrical outlet that matches the appliance's voltage and frequency (680W power requirement).

Enstriksyon Operasyon

1. Filling Tanks: Open the lids and pour your desired cold beverages into each of the three 18-liter tanks. Do not overfill.
2. Pouvwa sou: Locate the power switch (usually on the side or rear of the base unit) and turn the dispenser ON.
3. Cooling and Agitation: The cooling system will begin to chill the beverages, and the fountain-type agitation system will start mixing the contents to maintain an even temperature and prevent settling. This process may take some time depending on the initial temperature of the beverages.
4. Dispense: To dispense a beverage, place a cup under the desired dispensing lever and press the lever inward. Release the lever to stop the flow.
5. Nivo Siveyans: Regularly check beverage levels in the transparent tanks and refill as needed.

Imaj: Yon gwo plan view of the three "PUSH" dispensing levers on the front of the stainless steel base, indicating how to operate them.

Imaj: Yon gwo plan view of the three removable drip trays located beneath the dispensing levers, designed to catch any spills.

Netwayaj ak antretyen

Netwayaj ak antretyen regilye enpòtan anpil pou lonjevite ak fonksyònman ijyenik dispansè ou a.

1. Netwayaj chak jou:
   • Turn off and unplug the dispenser.
   • Empty any remaining beverages from the tanks.
   • Remove the tanks, lids, agitators, and drip trays.
   • Wash these removable parts with warm, soapy water. Use a soft brush for agitators if needed.
   • Rense byen avèk dlo pwòp epi kite l sèk nèt nan lè a.
   • Wipe down the exterior of the base unit with a damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa plonje inite baz la nan dlo.
2. Antretyen peryodik:
   • Tcheke fil elektrik la pou nenpòt siy domaj.
   • Ensure ventilation openings on the base unit are clear of dust and debris.

Gid depanaj

Espesifikasyon

Image: A diagram illustrating the dimensions of the dispenser: 70 cm width, 40 cm depth, and 73 cm height, with a total weight of 48 kg.

Garanti ak sipò

For warranty information, technical support, or service inquiries, please contact RHINO customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Refer to the official RHINO website or your purchase documentation for specific contact details and warranty terms.