1. Pwodwi souview
The Mesqool Vibrating Alarm Clock (Model CR1027) is a portable device designed to assist with waking up through customizable alarm modes, including vibration, buzzer, or both. It features a rechargeable battery, dual alarm settings, and adjustable vibration intensity. This manual provides comprehensive instructions for its use.
Figi 1: Devan view of the Mesqool Vibrating Alarm Clock, displaying the digital time, AM/PM indicator, alarm icons, and battery status.
2. Pake kontni
Tanpri verifye ke tout atik yo prezan nan pakè ou a:
- Mesqool Vibrating Alarm Clock (CR1027)
- USB Chaje Kab
- Manyèl Itilizatè (dokiman sa a)
3. Layout aparèy
Familiarize yourself with the buttons and ports on your alarm clock for proper operation.
Figi 2: Side view of the alarm clock, indicating the location of control buttons and the charging port. Specific button functions are detailed in the operating instructions.
4. Enstalasyon
4.1 Premye chaj
Before using the alarm clock for the first time, ensure it is fully charged. Connect the provided USB charging cable to the clock's charging port and then to a compatible USB power adapter (not included). The battery indicator on the display will show the charging status.
Figi 3: The alarm clock connected to a charging cable, illustrating the charging process.
4.2 Power On/Off
To power the device on or off, press and hold the Power button (located on the side, refer to Figure 2) for approximately 3 seconds.
5. Operasyon Enstriksyon
5.1 Mete tan an
- Peze a Tan Mete button once. The hour digits will begin to flash.
- Sèvi ak la + epi - bouton pou ajiste lè a.
- Peze Tan Mete ankò. Chif minit yo ap flache.
- Sèvi ak la + epi - bouton pou ajiste minit yo.
- Peze Tan Mete a third time to confirm the time and exit the setting mode.
5.2 Mete Alam yo (Alam 1 ak Alam 2)
The alarm clock supports two independent alarms. The procedure for setting each alarm is identical.
- Peze a Alam 1 or Alam 2 button once. The alarm time will flash.
- Sèvi ak la + epi - bouton yo pou mete lè alam ou vle a.
- Peze bouton ki koresponn lan Alam button again. The alarm minutes will flash.
- Sèvi ak la + epi - bouton yo pou mete minit alam ou vle yo.
- Peze bouton ki koresponn lan Alam button a third time to confirm the alarm time.
- Immediately after setting the time, press the Alam button repeatedly to cycle through the available alarm modes: Vibwasyon sèlman, Buzzer sèlman, ak Vibration + Buzzer. The corresponding icon will appear on the display.
- To activate or deactivate an alarm, press the respective Alam button until the alarm icon appears (activated) or disappears (deactivated).
Figi 4: Display showing the three alarm modes: Vibration (VIB), Vibration + Buzzer (VIB+BUZZ), and Buzzer (BUZZ).
5.3 Repete Fonksyon
When an alarm is active, press the large Snooze/Limyè button (typically on the top or front, refer to Figure 2) to temporarily silence the alarm for approximately 9 minutes. The alarm will reactivate after this period.
5.4 Kijan pou kanpe alam lan
To stop an active alarm, press any button other than the Snooze/Limyè button. The alarm will then reset for the next scheduled activation.
5.5 Adjusting Vibration Intensity
The alarm clock offers three levels of vibration intensity: Low, Middle, and High.
- While the alarm is not active, press the Vibration button (refer to Figure 2).
- Each press will cycle through the intensity levels. The display may indicate the current level.
Figi 5: Illustration of the three vibration intensity levels: Low, Middle, and High.
5.6 Ekspozisyon klète
Peze a Limyè button (often combined with Snooze, refer to Figure 2) to cycle through different display brightness levels.
6. Antretyen
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Pa ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite twòp.
- Ensure the charging port remains free of dust and debris to maintain proper connection.
- When storing the device for extended periods, keep it in a cool, dry environment.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Revèy la pa limen. | Batri ap vide. | Connect the device to a power source using the USB cable and allow it to charge fully. |
| Alarm does not sound or vibrate. | Alam lan pa aktive oswa li pa byen configuré. | Verify that the alarm time is set correctly and the desired alarm mode (Vibration, Buzzer, or both) is selected and activated (alarm icon visible on display). |
| Ekran an fèb oswa ou pa ka li li. | Brightness level is set too low. | Peze a Limyè button to increase the display brightness. |
| Bouton yo pa reponn. | Pwoblèm lojisyèl tanporè. | Try restarting the device by holding the Power button for 3 seconds. If the issue persists, allow the battery to fully deplete and then recharge. |
8. Espesifikasyon
- Modèl: CR1027
- Mak: Mesqool
- Kalite ekspozisyon: dirije
- Sous pouvwa: Batri Powered (Rechargeable)
- Kapasite batri: 3000mAh
- Dimansyon pwodwi: Apeprè 3.35" lajè x 3.35" wotè x 1.06" pwofondè
- Pwa atik: 7.4 ons
- Karakteristik espesyal: Adjustable Volume, Dual Alarms, Snooze Function, Vibration Alarm
9. Garanti ak sipò
Mesqool products are manufactured to high standards. For warranty information, technical assistance, or customer support, please refer to the contact details provided on the product packaging or visit the official Mesqool website. Please retain your purchase receipt as proof of purchase for warranty claims.
Figi 6: Product packaging, which typically includes manufacturer details and support contact information such as email (e.g., support-eu@mesqool.com) and website (e.g., http://www.mesqool.com).