EZVALO 14.5-inch Rechargeable Motion Sensor Under Cabinet LED Light Manual

Entwodiksyon

Thank you for choosing the EZVALO 14.5-inch Rechargeable Motion Sensor Under Cabinet LED Light. This manual provides essential information for the safe and efficient use of your new lighting solution. Please read these instructions carefully before installation and operation.

Ki sa ki nan bwat la

• 2 x 14.5-inch Motion Sensor Lights (Gun Gray)
• 4 x Adhesive Iron Sheets
• 1 x USB-C chaje kab
• Manyèl Enstriksyon

Karakteristik pwodwi

• Capteur Mouvman: Automatically detects movement within a 10 ft / 120° range.
• Multiple Work Modes: Includes Always On, Always Off, Day Mode (motion activated day or night), and Night Mode (motion activated in dark environments only).
• Tanperati koulè reglabl: Choose from Warm Light (3000K), Natural Light (4200K), and White Light (6500K).
• Dimmable Klate: Three brightness levels available: Low (15%), Medium (60%), and High (100%).
• Batri rechargeable: Ekipe ak yon batri 3200mAh pou itilizasyon pwolonje.
• Enstalasyon fasil: Magnetic attachment with included adhesive iron plates for versatile mounting.

Image: EZVALO motion sensor light installed under a kitchen cabinet, demonstrating hands-free automatic illumination upon detecting movement.

Enstalasyon

Etap enstalasyon:

1. Prepare sifas la: Clean the desired installation surface thoroughly to ensure it is smooth, dry, and free of dust or grease.
2. Attach Adhesive Iron Plates: Peel off the protective film from the adhesive iron plates. Place them near the laser-engraved markings on the back of the light bar. Ensure the plates are securely pressed onto the surface.
3. Monte limyè a: Align the magnetic back of the EZVALO light with the installed iron plates. The light will snap into place magnetically. This allows for easy removal for charging.

Nòt enpòtan: To ensure proper motion sensing, maintain a minimum installation distance of 20 inches between two lights when installing multiple units in "AUTO" mode. Placing them too close may cause mutual interference.

Image: Diagram illustrating the easy magnetic installation process, showing the light bar attaching to adhesive iron plates.

Image: Visual guide showing suitable surfaces for installation, including ceramic tile, metal, wood, glass, refrigerators, and metal racks.

Image: Detailed steps for installing the adhesive iron plate: 1. Clean smooth surface. 2. Stick pads & peel. 3. Press to secure. Also shows minimum installation distance of 20 inches between lights.

Enstriksyon Operasyon

Bouton kontwòl:

The light features intuitive control buttons for power, mode selection, brightness, and color temperature adjustments.

Image: Diagram showing the control panel with buttons for Dimming Switch, 3 Color Temperatures, PIR Motion Sensor, Power Off, Night Mode, Day Mode, Always-on Mode, and Charging Indicator.

Mòd travay:

• Mòd Toujou Aktif: The light remains continuously on until the battery is depleted or manually turned off.
• Always Off Mode: Limyè a rete etenn.
• Day Mode (AUTO): The motion sensor activates the light when movement is detected, day or night. The light turns off after 20 seconds of no movement.
• Night Mode (AUTO): The motion sensor activates the light only in dark environments when movement is detected. The light turns off after 20 seconds of no movement.

Image: Visual representation of the three work modes: Always On (non-stop lighting), Day Mode (automatically turns on whenever motion is detected), and Night Mode (automatically turns on when motion is detected at dark environment only).

Ajiste klète ak tanperati koulè:

• Klate: Single press the brightness button to cycle through Low (15%), Medium (60%), and High (100%) brightness levels.
• Tanperati koulè: Single press the color temperature button to switch between Warm Light (3000K), Natural Light (4200K), and White Light (6500K).

Image: Illustration showing the three color temperatures (3000K, 4200K, 6500K) and adjustable brightness levels (15%, 60%, 100%).

Chaje

The EZVALO light is equipped with a 3200mAh rechargeable battery. Please charge the device before first use.

• Connect the provided USB-C charging cable to the charging port on the light.
• Branche lòt bout kab la nan yon sous kouran USB konpatib (pa egzanp, yon adaptè miray, yon pò USB òdinatè).
• Yon limyè endikatè wouj ap limen pandan chaj la.
• Limyè endikatè a ap vire vèt lè batri a konplètman chaje.

A full charge typically takes approximately 2 hours. In AUTO mode, the battery can last 10-30 days with 10-20 activations daily. In Always-On mode, it can provide up to 8.5 hours of illumination at maximum brightness.

Image: Details of the 3200mAh rechargeable battery, showing 8.5 hours in Always On mode, 10-30 days in Auto mode, and 2 hours for fast charging. A USB-C cable is shown connected to the light.

Antretyen

• Netwayaj: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Swen batri: To prolong battery life, avoid fully discharging the battery frequently. Recharge when the light output diminishes.
• Depo: If storing the light for an extended period, charge it fully and store in a cool, dry place. Recharge every 3-6 months to prevent deep discharge.

Depanaj

• Limyè pa limen:
  • Tcheke si batri a chaje.
  • Ensure the light is not in "Always Off" mode.
  • In AUTO modes, verify there is sufficient motion within the sensor range.
  • In Night Mode, ensure the environment is dark enough for activation.
• Motion sensor not working correctly:
  • Asire w ke Capteur a pa bloke.
  • Check the distance between multiple lights if installed in AUTO mode (minimum 20 inches recommended).
  • Verify the selected work mode (Day Mode or Night Mode).
• Pwodiksyon limyè a fèb:
  • Rechaje batri a.
  • Adjust the brightness level using the control buttons.

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official EZVALO websit. Kenbe resi acha ou pou reklamasyon garanti.