Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK. This advanced outdoor lighting solution features a 180° motion sensor, multiple lighting modes, adjustable color temperature, and rotatable light heads for optimal illumination and security.
Imaj: The ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK, shown with its packaging. This image illustrates the product's design and included components.
Enfòmasyon sou Sekirite
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury. Keep this manual for future reference.
- Sekirite elektrik: Toujou koupe kouran an nan disjonktè a anvan ou enstale oswa fè antretyen sou aparèy la. Asire w ke tout koneksyon fil yo byen fèm epi yo konfòm ak kòd elektrik lokal yo.
- Atè: Aparèy la dwe byen konekte atè pou anpeche yon chòk elektrik.
- Elektrisyen ki kalifye: Si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an, konsilte yon elektrisyen kalifye.
- Tanperati operasyon: Do not operate the fixture outside its specified temperature range.
- Kote mouye yo: This fixture is rated IP65 for wet locations, but ensure all seals and connections are properly secured during installation to maintain this rating.
Enstalasyon ak Enstalasyon
Follow these steps for proper installation of your flood light. Ensure power is OFF at the circuit breaker before proceeding.
1. Prepare pou Enstalasyon
- Depake aparèy la epi enspekte li pou wè si li pa domaje.
- Ensure all necessary mounting hardware is present.
- Koupe kouran an nan disjonktè prensipal la.
2. Monte aparèy la
- Tache bracket aliye a nan bwat junction la lè l sèvi avèk vis yo bay yo.
- Feed the electrical wires from the junction box through the gasket and into the fixture's wiring compartment.
- Tache aparèy la nan bracket la aliye.
3. Koneksyon fil elektrik
- Konekte a nwa fil soti nan aparèy la rive nan la black (live) fil ki soti nan ekipman pou pouvwa a.
- Konekte a blan fil soti nan aparèy la rive nan la white (neutral) fil ki soti nan ekipman pou pouvwa a.
- Konekte a green (ground) fil soti nan aparèy la rive nan la green or bare copper (ground) fil ki soti nan ekipman pou pouvwa a.
- Ensure all connections are secured with wire nuts and tucked neatly into the junction box.
4. Adjusting Light Heads
The light heads are rotatable 150° side-to-side and 180° up-and-down. Adjust them to cover your desired illumination area.
Imaj: Illustration showing the 180° up-and-down and 150° side-to-side rotation capabilities of the flood light heads, allowing for precise light direction.
Imaj: Detailed product specification diagram showing dimensions (10-1/4" L x 4-7/16" W x 6-13/16" H) and key features like motion sensor, photocell, 20W power, 5CCT, 2045lm brightness, and IP65 wet location rating.
Enstriksyon Operasyon
Your ASD LED Flood Light offers versatile operation modes and customizable settings.
1. Selecting Lighting Modes
Use the control dial on the motion sensor to select one of three operating modes:
- A LÈ: The light functions as a standard lamp, staying on continuously without motion sensing.
- DUSK TO DAWN (D2D): The light automatically turns on at dusk and off at dawn, based on ambient light levels detected by the photocell.
- OTO: The light turns on and off based on motion detection and your selected lux requirement settings (L - Low sensitive / M - Middle sensitive / H - High sensitive).
Imaj: Diagram illustrating the control dial for selecting ON TIME, D2D (Dusk to Dawn), and AUTO modes, with visual examples of how the light behaves in each setting.
Imaj: The flood light operating at night, demonstrating the built-in dusk-to-dawn photocell functionality which automatically activates the light when ambient light levels drop.
2. Motion Sensor Settings
The integrated 180° motion sensor has a detection range of up to 60 feet. In AUTO mode, you can adjust the sensitivity:
- L (Low Sensitive): Less sensitive to movement, ideal for areas with minimal activity.
- M (Middle Sensitive): Sansiblite estanda pou itilizasyon jeneral.
- H (High Sensitive): Most sensitive to movement, suitable for high-traffic areas or enhanced security.
You can also adjust the 'Hold Time' (how long the light stays on after motion is detected) and 'Ambient Light' (lux level at which the sensor becomes active) settings using the respective dials on the sensor unit.
Imaj: A person walking in front of a garage, demonstrating the 180° detection angle of the high-sensitive motion sensor, which activates the flood light.
Imaj: Diagram showing the flexible settings for the motion sensor, including Ambient Light (less than 10 lux), Hold Time (10 seconds to 10 minutes), and Detection Motion Speed (0.6-1.5 m/s), with a visual representation of the 60ft detection distance.
3. Color Temperature (CCT) Adjustment
The fixture offers 5 selectable color temperatures, ranging from warm to daylight. To change the CCT, locate the CCT switch on the fixture and slide it to your desired setting:
- 2700K: Mou blan
- 3000K: Blan cho
- 3500K: Net Blan
- 4000K: Cool Blan
- 5000K: Lajounen
Imaj: Visual representation of the 5 CCT options (2700K, 3000K, 3500K, 4000K, 5000K) and how they appear when the flood light is active, allowing users to select their preferred light ambiance.
Antretyen
Antretyen regilye asire pèfòmans optimal ak lonjevite limyè inondasyon ou an.
- Netwayaj: Netwaye aparèy la detanzantan avèk yon twal mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske yo ka domaje fini an oswa konpozan elektrik yo.
- Enspeksyon: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten connections as needed.
- Lantiy Capteur: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
Depanaj
Si w gen pwoblèm ak limyè inondasyon w lan, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | No power, faulty wiring, incorrect mode setting, photocell detecting too much light. | Check circuit breaker. Verify wiring connections. Ensure mode is set to AUTO or ON TIME. Cover photocell to test if it's detecting light. |
| Limyè rete limen kontinyèlman. | Mode set to ON TIME or D2D, constant motion detected, sensor sensitivity too high. | Switch mode to AUTO. Reduce motion sensor sensitivity (L setting). Check for constant heat sources or movement in detection zone. |
| Capteur mouvman an pa detekte mouvman. | Sensor obstructed, sensitivity too low, incorrect ambient light setting. | Clean sensor lens. Increase sensor sensitivity (H setting). Adjust ambient light setting on the sensor. Ensure sensor is aimed correctly. |
| Limyè flickers oswa dim. | Loose wiring, voltage fluctuations, incompatible dimmer (if applicable). | Check and tighten all wiring connections. Consult an electrician for voltage issues. This fixture is not designed for use with dimmers. |
Espesifikasyon pwodwi
- Mak: ASD
- Non modèl: SFL A-SFL-20BK
- Nimewo Pati: A-SFL-20BK
- Koulè: Black with Motion Sensor
- Materyèl: Aliminyòm, polikarbonat
- Style: Modèn
- Fòm aparèy limyè: Floodlight
- Kalite chanm: Espas Deyò
- Dimansyon pwodwi: 10.24"L x 4.45"L x 6.81"H
- Itilizasyon espesifik pou pwodwi: Deyò
- Itilizasyon anndan/deyò: Deyò
- Sous pouvwa: Fil elektrik
- Kalite enstalasyon: Flush Mount
- Karakteristik espesyal: 180° 3 Modes Motion Sensor and Photocell, 5 Color Temperature Options, Beam Angle 100°, Rotatable Light Heads for Directional Light Control, Wet Locations Rated (IP65)
- Metòd kontwòl: Remote (referring to sensor adjustments, not a physical remote)
- Kalite sous limyè: dirije
- Voltage: 120 Volts
- Metòd ekleraj: Reglabl
- Pwa atik: 1 liv
- Wattage: 20 wat
- Konte inite: 1.0 Konte
- Kalite montaj: Mi mòn
- Kalite aparèy: Ki pa Detachable
- UPC: 810128113458
- Sètifikasyon: UL, DLC Premium
- Viv lavi: 145,000 èdtan
Enfòmasyon sou Garanti
This ASD LED Motion Sensor Outdoor Flood Light (Model A-SFL-20BK) is covered by a 5-ane garanti limite apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Li pa kouvri domaj ki soti nan move enstalasyon, aksidan, move itilizasyon, abi, oswa modifikasyon san otorizasyon.
For warranty claims or further details, please retain your proof of purchase and contact customer support.
Sipò pou Kliyan
If you have any questions, require technical assistance, or need to report an issue with your ASD LED Motion Sensor Outdoor Flood Light, please contact our customer support team.
Please visit the official ASD website for the most current contact information, including phone numbers, email addresses, and online support resources.
Resous sou entènèt: Visit the ASD Store on Amazon
