1. Entwodiksyon
Thank you for choosing the Midea MDG09EH80/1 Heat Pump Tumble Dryer. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your appliance. Please read it thoroughly before use and keep it for future reference.
This heat pump tumble dryer is designed for domestic use to dry laundry after it has been washed and spun. It features an 8 kg capacity, 16 drying programs, automatic drying, anti-crease function, and a delayed start option.
2. Enfòmasyon sou Sekirite
For your safety and to ensure correct usage, please observe the following precautions:
- Asire ke aparèy la byen mete latè.
- Do not install the dryer in a damp environment or where it may be exposed to water.
- Kenbe timoun ak bèt kay lwen aparèy la pandan operasyon an.
- Pa seche atik ki pa lave nan seche rad la.
- Items soiled with oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes, or wax removers should be washed thoroughly in hot water with an extra amount of detergent before being dried in the tumble dryer.
- Always clean the lint filter after each use.
- Pa bloke ouvèti vantilasyon yo.
- Deploge aparèy la anvan netwaye oswa antretyen.
3. Pwodwi souview
Familiarize yourself with the main components of your Midea tumble dryer.
Imaj 3.1: Devan view of the Midea MDG09EH80/1 Heat Pump Tumble Dryer, showing the control panel, drum door, and Midea branding.
Imaj 3.2: Close-up of the control panel, featuring the program selection dial, digital display, and touch buttons for various functions like Delay, Time, Anti-Crease, Intensity, and Start/Pause.
Karakteristik panèl kontwòl:
- Rele pwogram: Selects the desired drying program.
- Ekspozisyon: Montre tan ki rete a, kòd erè yo, ak opsyon ki chwazi yo.
- Bouton reta: Sets a delayed start time.
- Bouton Tan: Adjusts drying time for certain programs.
- Anti-Crease Button: Activates or deactivates the anti-crease function.
- Bouton entansite: Adjusts drying intensity (e.g., standard, extra dry).
- Bouton kòmanse/poz: Starts or pauses the drying cycle.
4. Enstalasyon ak Enstalasyon
Proper installation is crucial for the performance and longevity of your dryer.
4.1 Debake
Carefully remove all packaging materials. Check for any damage during transit. Report any damage to your retailer immediately.
4.2 Plasman
- Mete seche rad la sou yon planche ki plat e ki fèm.
- Ensure adequate ventilation around the appliance. Do not block the air intake at the front or the exhaust at the rear.
- Avoid placing the dryer near heat sources or in direct sunlight.
- The dimensions of the dryer are approximately 59.5 cm (width) x 60 cm (depth) x 84.5 cm (height). Ensure sufficient space for installation and door opening.
Imaj 4.1: Side view of the Midea MDG09EH80/1 dryer, illustrating its dimensions (845mm height, 600mm depth, 595mm width).
4.3 Nivelman
Adjust the feet at the bottom of the dryer to ensure it is perfectly level. A level appliance reduces vibration and noise during operation.
4.4 Koneksyon elektrik
Connect the power cord to a properly earthed electrical outlet. Ensure the voltage ak frekans lan koresponn ak espesifikasyon ki sou plak karakteristik aparèy la.
4.5 Drain Hose Installation (Optional)
The dryer collects condensed water in a tank. For continuous drainage, you can connect a drain hose to an external drain. Refer to the detailed instructions in the full user manual for this procedure.
5. Operasyon Enstriksyon
Follow these steps for effective and safe drying.
5.1 Prepare Lesiv
- Triye lesiv selon kalite twal ak kondisyon siye.
- Close zippers, hooks, and fastenings.
- Pòch vid.
- Ensure laundry is thoroughly spun to reduce drying time and energy consumption.
5.2 Chaje seche rad la
Open the dryer door and load the laundry into the drum. Do not overload the dryer; ensure there is enough space for clothes to tumble freely. The maximum load capacity is 8 kg.
5.3 Chwazi yon Pwogram
Turn the program dial to select one of the 16 available drying programs. The display will show the default settings for the chosen program. Examples of programs include:
- Koton: For cotton items like towels, sheets, and underwear.
- Sentetik: Pou twal sentetik tankou chemiz, kòsaj, ak rad espò.
- Delika: Pou bagay delika ki bezwen siye dousman.
- Lenn: Specific program for wool items (check garment care labels).
- Rafrechi: To air out clothes and remove odors without heat.
- Jeans: Pou atik denim.
- Dra kabann: For larger items like duvet covers and sheets.
5.4 Adjusting Drying Levels and Options
The dryer features an automatic drying system that detects the drying state of your clothes, preventing over-drying and protecting fabrics.
Imaj 5.1: Visual representation of the three drying levels: Low (lightly damp for easy ironing), Medium (fully dry for immediate wear), and High (moisture-proof storage).
You can select from 3 drying levels:
- Standard Dry: For general drying, suitable for most items.
- Fè sèk: Kite rad yon ti kras damp pou pi fasil planch.
- Siplemantè sèk: For items requiring complete dryness, such as towels or thick fabrics.
Additional functions can be selected using the touch buttons:
- Anti-pli: This function periodically rotates the drum after the drying cycle to prevent wrinkles from setting in, especially if you cannot remove clothes immediately.
- Kòmanse reta: Set a time for the drying cycle to begin, up to 24 hours.
- Limyè tanbou: The interior light illuminates when the door is opened, ensuring no items are left behind.
Imaj 5.2: Depiction of the Smart Continuous Rotation feature, which rotates the drum periodically after drying to prevent wrinkles.
Imaj 5.3: Visual showing the Refresh function, which uses low-temperature air wash to remove musty odors and refresh fabrics.
5.5 Kòmanse Sik la
Peze a Kòmanse/Poz button to begin the drying cycle. The display will show the estimated remaining time.
5.6 Fen Sik
Once the cycle is complete, the dryer will beep, and the display will indicate 'End'. Open the door and remove your laundry. Remember to clean the lint filter and empty the water tank after each use.
6. Antretyen
Antretyen regilye asire pèfòmans optimal epi pwolonje dire lavi seche rad ou a.
6.1 Netwaye Filtè Pousye a
The lint filter is located inside the door opening. It must be cleaned after every drying cycle to maintain drying efficiency and prevent fire hazards.
- Louvri pòt la seche rad.
- Pull the lint filter upwards to remove it.
- Open the filter and remove all accumulated lint by hand or with a soft brush.
- Rense filtè a anba dlo k ap koule si sa nesesè, epi asire w ke li byen sèk anvan ou mete l tounen.
- Place the clean filter back into its housing until it clicks into place.
6.2 Vide tank dlo a
The condensed water is collected in a tank, usually located at the top left of the control panel. This tank must be emptied after each drying cycle.
- Rale tank dlo a dousman.
- Vide dlo ki ranmase a nan yon lavabo.
- Push the water tank back into its position until it is securely seated.
6.3 Cleaning the Heat Exchanger/Condenser
The heat exchanger (condenser) should be cleaned periodically (e.g., every few months or as indicated by the appliance) to ensure efficient operation. Refer to the full manual for detailed instructions on accessing and cleaning this component, typically located behind a lower access panel.
6.4 Netwayaj jeneral
- Siye eksteryè seche rad la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Clean the interior of the drum with a damp twal si sa nesesè.
NAN. Depanaj
Anvan ou kontakte sèvis kliyan, tanpri tcheke pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Seche rad pa kòmanse | Pa gen kouran; Pòt la pa byen fèmen; Bouton Start/Poz la pa peze. | Check power plug and fuse; Close the door firmly; Press Start/Pause. |
| Rad yo pa sèk | Lint filter blocked; Water tank full; Incorrect program selected; Overloaded dryer. | Clean lint filter; Empty water tank; Select appropriate program; Reduce load size. |
| Twòp bri/Vibration | Seche rad la pa nivo; gen objè etranje nan tanbou a. | Ajiste pye nivelman yo; Tcheke tanbou a pou wè si gen bagay ki lach. |
| Dlo ap koule | Water tank not properly inserted; Drain hose (if connected) loose or blocked. | Reinsert water tank correctly; Check drain hose connection and clear any blockages. |
If the problem persists after checking these points, please refer to the complete troubleshooting guide in the full user manual or contact Midea customer support.
8. Espesifikasyon
Technical data for the Midea MDG09EH80/1 Heat Pump Tumble Dryer.
Imaj 8.1: Energy label for the Midea MDG09EH80/1, showing A++ energy efficiency, 235 kWh/annum consumption, 8.0 kg capacity, and 65 dB noise level.
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | Midea |
| Nimewo Modèl | MDG09EH80/1 |
| Kalite | Ponp Chalè Seche rad |
| Loading Kalite | Chaj devan |
| Kapasite | 8 Kilogram |
| Klas efikasite enèji | A++ |
| Konsomasyon enèji chak ane | 235 Kilowat-èdtan |
| Nivo bri | 65 Desibèl |
| Dimansyon (W x P x H) | 59.5 x 60 x 84.5 cm |
| Pwa | 41 Kilogram |
| Materyèl | Asye pur, plastik ABS |
| Voltage | 240 Volts |
| Kantite Pwogram yo | 16 |
9. Garanti ak sipò
Your Midea MDG09EH80/1 Heat Pump Tumble Dryer comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the duration and coverage.
For technical assistance, spare parts, or warranty claims, please contact Midea customer support. You can find contact information on the Midea official websit la oubyen nan dokimantasyon ki vini ak aparèy ou an.
Please have your model number (MDG09EH80/1) and purchase date ready when contacting support.
