Entwodiksyon
The AK Interactive Real Colors Grey FS 36081 is a high-quality lacquer-based paint designed for model building and various artistic applications. Its advanced chemical formula ensures color accuracy and smooth application. This paint flows efficiently through an airbrush, adheres well to surfaces, and dries with a durable, soft finish, making it suitable for subsequent weathering effects. This manual provides essential information for proper use, maintenance, and safety.
Pwodwi souview
This image shows a 17 ml bottle of AK Interactive Real Colors Grey FS 36081 lacquer paint, ready for use in model building and other artistic applications.
Enstalasyon ak preparasyon
- Souke byen: Before each use, thoroughly shake the paint bottle for at least one minute to ensure pigments are evenly mixed.
- Preparasyon sifas: Ensure the surface to be painted is clean, dry, and free of dust, grease, or other contaminants. A primer is recommended for optimal adhesion and color vibrancy.
- Dilution: This lacquer-based paint may require dilution for airbrush application. Use AK Interactive RC701/RC702 High Compatibility Thinner or other thinners specifically designed for lacquer-based paints. Start with a 1:1 paint-to-thinner ratio and adjust as needed for desired consistency and flow. For brush application, dilution may not be necessary, or only minimal thinning might be required.
- Vantilasyon: Work in a well-ventilated area or use appropriate respiratory protection, as lacquer paints emit fumes.
Enstriksyon Operasyon
Airbrush Application
- Presyon: Recommended air pressure typically ranges from 15-25 PSI (1.0-1.7 bar), depending on the airbrush nozzle size and desired paint flow.
- Distans: Hold the airbrush approximately 5-10 cm (2-4 inches) from the surface.
- Coats: Apply paint in thin, even coats. Allow each coat to become touch-dry before applying the next to prevent pooling or runs. Multiple thin coats yield a smoother, more durable finish than one thick coat.
Bwòs aplikasyon
- Kalite bwòs: Use high-quality synthetic or natural hair brushes suitable for lacquer paints.
- Aplikasyon: Apply paint smoothly and evenly. Avoid overworking the paint, as lacquer paints dry quickly.
- Coats: Apply thin coats, allowing adequate drying time between layers.
Tan seche
- Manyen sèk: Approximately 5-15 minutes, depending on humidity and temperature.
- Handling Dry: Apeprè 30-60 minit.
- Gerizon konplè: Up to 24 hours for complete hardness and resistance to handling and weathering products.
Antretyen ak Depo
Zouti netwayaj
- Airbrush: Immediately after use, clean your airbrush thoroughly with lacquer thinner or a dedicated airbrush cleaner. Disassemble and clean components as necessary to prevent clogging.
- Bwòs: Clean brushes immediately after use with lacquer thinner. Rinse thoroughly and reshape bristles before storing.
Depo
- Store paint bottles upright in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure caps are tightly sealed to prevent evaporation and drying of the paint.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Airbrush Clogging | Insufficient dilution, paint drying in nozzle, dirty airbrush. | Increase dilution, clean airbrush thoroughly, flush with thinner between colors. |
| Pòv adezyon / dekole | Improper surface preparation (grease, dust), incompatible primer. | Clean surface thoroughly, use appropriate primer for lacquer paints. |
| Uneven / Grainy Finish | Paint applied too thick, incorrect air pressure, paint drying too fast. | Apply thinner coats, adjust air pressure, work in a less dry environment or use a retarder if compatible. |
| Slow Drying Time | High humidity, low temperature, paint applied too thick. | Ensure proper ventilation, maintain optimal room temperature, apply thinner coats. |
Espesifikasyon
- Mak: AK entèaktif
- Nimewo Modèl: amz-AK-RC912 (RC912)
- Koulè: Grey FS 36081
- Volim atik: 17 Mililit (0.58 Fl Oz)
- Kalite penti: Lacquer-based
- Fòm atik: Likid
- Itilizasyon anndan/deyò: Andedan kay la, deyò
- Manifakti: AK-Interactive
Enfòmasyon sou Sekirite
AVÈTISMAN: This product contains chemicals known to cause cancer and birth defects or other reproductive harm. Always read and follow safety instructions on the product label. Use in a well-ventilated area. Wear appropriate personal protective equipment, including gloves and a respirator. Keep out of reach of children. Do not ingest. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice.
For detailed safety data sheets (SDS), please refer to the manufacturer's official websit.
Sipò
For further assistance, technical support, or inquiries regarding AK Interactive products, please visit the official AK Interactive website or contact their customer service department. Please have your product model number (amz-AK-RC912) available when contacting support.
Websit: www.ak-interactive.com
