Entwodiksyon
The Futaba 4PM Plus is an advanced 4-channel radio system designed for precision control of radio-controlled cars and trucks. It offers a blend of ergonomic design, intuitive user interface, and high-speed response, making it suitable for both serious racers and hobbyists. This manual provides essential information for setting up, operating, and maintaining your Futaba 4PM Plus transmitter and R304SB receiver.
Kontni pake
- T4PM+ Transmitter
- R304SB/E Receiver
- Dry Battery Holder
- Mini tournevis
Figure 1: Futaba 4PM Plus Transmitter. This image shows the black Futaba 4PM Plus radio transmitter with its large LCD screen displaying model information, channel settings, and battery voltage. The transmitter features a steering wheel on the right side and a pistol grip handle, resting on its base.
Enstalasyon
1. Enstalasyon batri
The T4PM+ Transmitter requires four AA batteries (not included). Use the provided dry battery holder.
- Open the battery compartment cover on the bottom of the transmitter handle.
- Insert four AA batteries into the dry battery holder, ensuring correct polarity (+/-).
- Place the battery holder into the compartment and close the cover securely.
- For optimal performance, use high-quality alkaline or rechargeable NiMH batteries.
2. Receiver Binding (Linking)
To establish communication between the transmitter and receiver, they must be bound.
- Asire w ke transmetè a etenn.
- Connect the R304SB/E receiver to a power source (e.g., ESC with BEC or separate receiver battery).
- Press and hold the Link button on the receiver while turning on the receiver's power. The LED on the receiver will begin to flash.
- Turn on the T4PM+ transmitter.
- Navigate to the Link menu on the transmitter's LCD screen.
- Select the binding option. The receiver's LED should turn solid green, indicating a successful link.
- Turn off both the transmitter and receiver, then turn them back on to confirm the link.
Enstriksyon Operasyon
Kontwòl debaz yo
- Volan: Controls the left/right direction of your vehicle.
- Deklanche gaz: Controls forward/reverse movement. Pull for forward, push for reverse/brake.
- Ekran LCD: Displays current settings, battery voltage, model memory, and other vital information.
- Bouton Navigasyon: Used to navigate through menus and adjust settings on the LCD screen.
Karakteristik pwogramasyon avanse
The 4PM Plus offers extensive programming capabilities to fine-tune your vehicle's performance. Refer to the on-screen menus for detailed adjustments.
- Modèl memwa: Store settings for multiple vehicles. The transmitter supports various model memories.
- Dual Rate (D/R): Adjust the maximum steering angle.
- Exponential (EXP): Modify the sensitivity of steering and throttle around the center point.
- End Point Adjustment (EPA/ATL): Fikse kous maksimòm lan pou chak servo.
- Sub-Trim: Make fine adjustments to the servo neutral position.
- Ranvèse: Change the direction of servo movement.
- Fail-Safe (F/S): Program the receiver to move servos to a predetermined position in case of signal loss.
- Brake Fail-Safe (B-F/S): Specific fail-safe for brake function.
- ID: Unique identification for binding.
For detailed instructions on specific programming functions, consult the on-screen help or the comprehensive digital manual available on the Futaba websit.
Antretyen
Netwayaj
- Wipe the transmitter and receiver with a soft, dry cloth.
- Do not use solvents or abrasive cleaners, as they may damage the plastic or electronic components.
- Keep the LCD screen clean and free of dust.
Depo
- Store the transmitter and receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
- Retire pil yo nan transmetè a si ou pa pral itilize li pou yon peryòd tan pwolonje pou anpeche flit.
- Protect the antenna from bending or damage during storage.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Transmitter does not power on. | Pil ki mouri oswa ki mal enstale. | Tcheke polarite pil yo; ranplase yo ak pil nèf. |
| No response from vehicle. | Receiver not bound; power issue to receiver/ESC; incorrect servo connections. | Perform binding procedure; check all power connections; verify servo connections. |
| Erratic control or short range. | Interference; damaged antenna; low transmitter/receiver battery. | Operate in an open area away from other 2.4GHz devices; inspect antennas; replace/recharge batteries. |
| Servos move in the wrong direction. | Servo reverse setting is incorrect. | Adjust the servo reverse setting in the transmitter's menu. |
Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Modèl transmetè | T4PM+ |
| Modèl reseptè | R304SB/E |
| Sistèm | T-FHSS SR/T-FHSS/S-FHSS SYSTEM, Wheel Type, 4 Channels |
| Metòd kominikasyon | Bidirectional protocol; F/S, B-F/S, ID for safety |
| Maksimòm Range opere | 100m (Optimum condition, except MINIT system) |
| Pwa transmetè | 2.06 liv (apeprè 934g) |
| Dimansyon Transmetè (L x W x H) | 10.25 x 10.13 x 5.75 pous (apeprè 260 x 257 x 146 mm) |
| Frekans transmetè | 2.4 GHz bann |
| Antèn transmisyon | 1/2λ di-pole |
| RF pouvwa Sòti | 100mW EIRP |
| Dren Kouran | 150 mA oswa mwens |
| Receiver Size (L x W x H) | 35.1 mm x 23.2 mm x 12.5 mm |
| Pwa reseptè | 7.0 g |
Enfòmasyon sou Garanti
Futaba products are manufactured with high-quality components and undergo rigorous testing. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Futaba website. Generally, warranty covers manufacturing defects under normal use for a specified period from the date of purchase.
Tanpri kenbe prèv ou achte pou reklamasyon garanti.
Sipò
For technical assistance, spare parts, or further inquiries, please contact Futaba customer support.
- Ofisyèl Websit: www.futabarc.com (Tanpri tcheke ofisyèl la websit la pou jwenn enfòmasyon kontak ak resous sipò ki pi resan yo.)
- Resous sou entènèt: FAQs, downloadable manuals, and software updates may be available on the official support page.
When contacting support, please have your product model number (01004416-3) and a detailed description of the issue ready.