Makerfire Digital Thermostat Temperature Controller User Manual

1. Entwodiksyon

The Makerfire Digital Thermostat Temperature Controller is a versatile plug-in device designed for precise temperature management. It features an external temperature sensor, supports both heating and cooling modes, and includes advanced functions such as a programmable timer, temperature alarms, and multiple operating modes. This device helps maintain optimal temperatures for various applications while promoting energy efficiency.

The controller operates on AC230V 50HZ and has a maximum output of 16A 3680W.

Imaj 1.1: Devan view of the Makerfire Digital Thermostat Temperature Controller with its external temperature probe.

2. Pwodwi souview

2.1 Karakteristik kle

• Detèktè Tanperati ekstèn: Accurately detects and controls temperature.
• Heating and Cooling Control: Supports both heating and cooling equipment.
• Programmable Timer Function: Divide the day into 3 time periods with distinct temperature settings.
• Fonksyon alam: High and low-temperature alarms with buzzer and backlight flashing alerts.
• Mòd operasyon miltip: Includes TC Mode (temperature control), TC + Time Mode (timer and temperature control), Time Mode (timer only), and Alarm Mode.
• Kalibrasyon Tanperati: Allows for precise adjustment of temperature readings.
• Celsius/Fahrenheit Switchable: Chanje ant inite tanperati yo fasilman.
• Lajè konpatibilite: Suitable for greenhouses, reptile enclosures, incubators, aquariums, freezers, refrigerators, fermentation, and more.

Image 2.1: Visual representation of the controller's key features, including heating/cooling, timing, alarm, and calibration.

2.2 Eleman

Image 2.2: Diagram illustrating the main components of the temperature controller, including the display, control buttons (MODE, SET, UP/CLK, DOWN), power outlet, and external sensor probe.

• Ekspozisyon ekran: Shows measured temperature, set temperatures, time, and mode indicators.
• Bouton MODE: Cycles through operating modes and confirms settings.
• SET bouton: Enters setting mode for parameters.
• UP/CLK Button: Increases values, adjusts clock, and mutes alarms.
• DESANN bouton: Decreases values.
• Priz pouvwa: Connects to heating or cooling devices. Features a safety protection door.
• Sond Capteur: External probe for accurate temperature measurement.
• Limyè Endikatè: Li limen pou montre eta operasyon an.

3. Enstalasyon

3.1 Koneksyon Inisyal

1. Insert the external temperature sensor probe into the designated port on the side of the controller.
2. Plug the temperature controller into a standard AC230V 50HZ power outlet.
3. Connect your heating or cooling device (e.g., heater, fan) to the power outlet on the front of the controller.

Note: Some users have reported that the 3-pin plug may not fit all Japanese 2-pin outlets. An adapter may be required. The product is rated for 230V, but some reviews suggest it supports a wider range (100-250V). Please verify compatibility with your local power supply before use.

3.2 Temperature Unit Selection (Celsius/Fahrenheit)

The device supports switching between Celsius (°C) and Fahrenheit (°F). Refer to the operating instructions for specific button combinations to change the unit.

3.3 Kalibrasyon Tanperati

To ensure accurate temperature readings, you can calibrate the sensor:

1. Peze epi kenbe la MÒD button for 4 seconds to enter calibration mode.
2. Sèvi ak la UP/CLK epi DESANN buttons to adjust the temperature value.
3. Peze epi kenbe la MÒD button for 4 seconds again to exit calibration mode and save the setting.

Image 3.1: Illustration of the temperature calibration process using the MODE, UP/CLK, and DOWN buttons.

4. Operasyon Enstriksyon

The controller offers four distinct operating modes: TC Mode, TC+Timer Mode, Timer Mode, and Alarm Mode. Press the MÒD bouton pou chanje mòd sa yo.

Imaj 4.1: Plis paseview of the four operating modes: TC Mode, TC+Timer Mode, Timer Mode, and Alarm Mode.

4.1 TC Mode (Temperature Control)

This mode controls the temperature based on a set start and stop temperature. It displays the current measured temperature, the temperature to start adjustment, and the temperature to stop adjustment.

Image 4.2: Display and setting method for TC Mode, showing current, start, and stop temperatures.

Metòd Anviwònman:

• Peze SET: The value to be adjusted will flash.
• Sèvi ak UP/CLK epi DESANN: Increase or decrease the value.
• Peze MÒD: Setting complete.

4.2 TC + Timer Mode (Temperature Control with Timer)

This mode combines temperature control with a timer function, allowing for temperature adjustments across three distinct time periods within a day. The display shows current temperature/time in sequence, the temperature to start adjustment, and the temperature to stop adjustment.

Image 4.3: Display and setting method for TC+Timer Mode, supporting three time-based temperature controls.

Metòd Anviwònman:

• Peze SET: Cycles through setting items (TC1 Time, TC1 Temperature; TC2 Time, TC2 Temperature; TC3 Time, TC3 Temperature).
• Sèvi ak UP/CLK epi DESANN: Increase or decrease the values.
• Peze MÒD: Confirms the current setting and automatically moves to the next setting.

This mode divides the day into three periods. The start time of TC2 is the end time of TC1. The start time of TC3 is the end time of TC2. The start time of TC1 is the end time of TC3. (If no time is set for TC3, the start time of TC1 becomes the end time of TC2).

4.3 Mòd revèy

This mode functions as a standalone timer, allowing you to set specific ON and OFF times for connected devices. It displays the current time, the start time for timing, and the stop time for timing.

Image 4.4: Display and setting method for Timer Mode, showing current time, ON time, and OFF time.

Metòd Anviwònman:

• Peze SET: The value to be adjusted will flash.
• Sèvi ak UP/CLK epi DESANN: Increase or decrease the value.
• Peze MÒD: Setting complete.

Alarm Mute Function:

If an alarm sounds, press the UP/CLK button to silence the buzzer for 15 minutes.

Current Time Calibration:

Peze epi kenbe la UP/CLK button for 3 seconds to calibrate the current time.

4.4 mòd alam

This mode allows you to set high and low-temperature alarm thresholds. If the measured temperature exceeds these thresholds, an alarm will activate. The display shows the current temperature, the high-temperature alarm setting, and the low-temperature alarm setting. Initial values are 0°C and 40°C.

Image 4.5: Display and setting method for Alarm Mode, showing current temperature, high alarm, and low alarm settings.

Metòd Anviwònman:

• Peze SET: The value to be adjusted will flash.
• Sèvi ak UP/CLK epi DESANN: Increase or decrease the value.
• Peze MÒD: Setting complete.

Alarm Mute Function:

If an alarm sounds, press the UP/CLK button to silence the buzzer for 15 minutes.

5. Antretyen

5.1 Netwayaj

To clean the device, wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the device is unplugged before cleaning.

5.2 Reyajiste Fonksyon

If the product's display or operation is abnormal, you can reset it to factory default settings:

• Locate the small reset button on the device.
• Use a matching reset tool (e.g., a thin pin) to press the RESET bouton.
• The system will reset all parameters to their initial default values.

Image 5.1: Illustration showing the location of the reset button and the use of a reset tool.

NAN. Depanaj

• Aparèy pa soumen: Ensure the controller is securely plugged into a functional power outlet. Check the power source.
• Tanperati a pa chanje: Verify that the heating or cooling device is properly connected to the controller's outlet and is functioning correctly. Check the set temperatures and mode.
• Alam lan sonnen sanzatann: Review the high and low-temperature alarm settings in Alarm Mode. Ensure they are appropriate for your application. Press the UP/CLK button to temporarily mute the alarm.
• Lekti tanperati ki pa egzak: Perform a temperature calibration as described in Section 3.3. Ensure the sensor probe is correctly positioned and not damaged.
• Plug compatibility issues: If the 3-pin plug does not fit your local outlet, a suitable adapter may be required.
• Display or function abnormalities: Use the reset function (Section 5.2) to restore default settings.

7. Espesifikasyon

Image 7.1: Detailed dimensions of the temperature controller and its sensor probe.

8. Garanti ak sipò

Warranty information for this product is not provided in the available data. For details regarding warranty coverage, please refer to the product packaging or contact the manufacturer directly.

For technical support, troubleshooting assistance, or any inquiries about the product, please contact Makerfire customer service or the seller from whom you purchased the device.