1. Entwodiksyon
Seri Calex Spot On an ofri ekleraj pwisan, san fil pou divès sifas. Limyè kontra enfòmèl ant sa aamp is designed for ease of use and efficient illumination in areas without direct power access. Its slim profile and integrated sensors make it a versatile lighting solution for your home.
Image: A single Calex Spot On wireless wall lamp, highlighting its compact and sleek design with the motion sensor visible in the center.
2. Karakteristik kle
- Konvenyans san fil: Operates on 3x AAA batteries, eliminating the need for power outlets. Ideal for locations without mains power.
- Mens konsepsyon: Only 10mm thick, ensuring a discreet and stylish appearance.
- Enstalasyon fasil: Simple to attach to various surfaces using the included 3M Tape and Magnet.
- Efficient Day/Night Sensor: Features a PIR sensor with a 60° range for automatic activation upon motion detection.
- Ekonomize enèji: Equipped with built-in timers to conserve energy and ensure long-lasting use without waste.
- Limyè reglabl: Focuses light where it is needed.
3. Enstalasyon ak Enstalasyon
Follow these steps to set up your Calex Spot On Wireless Wall Lamp:
- Depake kontni an: Carefully remove all items from the packaging. Ensure you have the three wall lamps, 3M adhesive tape, and magnets.
- Mete pil: Chak lamp requires 3x AAA batteries (not included). Locate the battery compartment on the back of the lamp, open it, and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.
- Chwazi Kote Montaj: Select a clean, dry, and flat surface for installation. Consider areas like staircases, hallways, closets, or dark corners where additional light is needed.
- Opsyon Montaj:
- Using 3M Adhesive Tape: Peel off the protective backing from the 3M adhesive tape and firmly press it onto the back of the lamp. Then, press the lamp firmly onto the desired surface for at least 30 seconds.
- Using Magnets: If mounting on a metallic surface, the integrated magnet allows for direct attachment. Alternatively, use the included metal plates (if provided) with adhesive backing to create a magnetic surface on non-metallic areas, then attach the lamp.
- Fonksyonalite tès: Once mounted, test the motion sensor and light activation. The lamp should illuminate when motion is detected within its range in low-light conditions.
Image: Calex Spot On lamp providing illumination on a staircase. The lamp is discreetly mounted on the wall, casting warm light downwards onto the steps, enhancing visibility and safety.
Imaj: Yon gwo plan view of the Calex Spot On lamp installed on a wall, demonstrating its light output. The warm light is directed downwards, highlighting the texture of the wall and the edge of the wooden staircase.
4. Operasyon Enstriksyon
The Calex Spot On lamp is designed for automatic operation based on ambient light and motion detection.
- Aktivasyon otomatik: The integrated Day/Night PIR sensor detects motion within a 60° range and up to 3.5 meters. The lamp will automatically turn on when motion is detected in low-light conditions.
- Dire Limyè: Once activated, the lamp will remain lit for approximately 20 seconds. If motion continues to be detected, the light will stay on. After 20 seconds of no motion, the lamp will turn off to conserve battery life.
- Energy Saving Timers: L laamp is equipped with internal timers to optimize battery usage. There are no user-adjustable settings for these timers.
Image: The Calex Spot On lamp providing subtle illumination in a dark bedroom setting. The light is cast onto the floor beside a bed, demonstrating its utility as a night light or for navigating in low-light conditions.
5. Antretyen
To ensure optimal performance and longevity of your Calex Spot On Wireless Wall Lamp, swiv gid antretyen senp sa yo:
- Netwayaj: Siye lamp gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
- Ranplasman batri: When the light output diminishes or the lamp stops activating, it's time to replace the batteries. Open the battery compartment, remove the old AAA batteries, and insert new ones, ensuring correct polarity. Dispose of old batteries responsibly.
- Zòn Capteur: Keep the motion sensor lens clean and free from dust or obstructions to ensure accurate detection.
- Depo: Si sere lamp for an extended period, remove the batteries to prevent leakage and potential damage.
NAN. Depanaj
If you encounter issues with your Calex Spot On Wireless Wall Lamp, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Lamp pa limen. |
|
|
| Limyè a fèb oswa li ap tranble. | Ba pouvwa batri. | Ranplase tout pil ak nouvo. |
| Lamp turns off too quickly. | No continuous motion detected. | Ensure continuous motion within the sensor's range if prolonged illumination is desired. The lamp is designed to turn off after 20 seconds of no motion. |
| Lamp activates without apparent motion. |
|
|
7. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | CALEX |
| Nimewo Modèl | 4001000100-3 |
| Dimansyon pwodwi | 92 x 27 x 79 mm (approx. 9.2L x 9.2W x 7.9H cm) |
| Pwa | 65 Grams (per lamp) |
| Kantite | Mete 3 |
| Koulè | Blan |
| Materyèl | Plastik |
| Fini Kalite | Poli |
| Kalite sous limyè | dirije |
| Flux lumineux | 30 Lumen |
| Tanperati Koulè | 2700 Kelvin (Blan Cho) |
| Voltage | 4.5 Volts |
| Sous pouvwa | Battery (3x AAA per lamp) |
| Chanje style | Motion Detector and Day/Night Sensor |
| Ranje deteksyon mouvman | Jiska 3.5 mèt |
| Capteur Angle | 60° |
| Dire ekleraj | 20 seconds (after last detected motion) |
| Kalite enstalasyon | Surface Mounted (3M Tape & Magnet) |
| Itilizasyon espesifik | Home, Stairs, Dark Corners |
| Andedan kay la / Deyò Itilizasyon | Andedan kay la |
8. Garanti ak sipò
Pou enfòmasyon sou garanti a ak sipò kliyan, tanpri al gade paj ofisyèl CALEX la. websit la oubyen kontakte revandè w la. Kenbe prèv acha w la pou nenpòt reklamasyon sou garanti a.
Pou plis asistans oswa kesyon teknik, tanpri vizite CALEX Store on Amazon or the official CALEX websit.
