1. Entwodiksyon
Thank you for choosing the WORKPRO 7.2V Electric Pruning Shears. This manual provides essential information for the safe operation, maintenance, and care of your new tool. Please read it thoroughly before first use and retain it for future reference.
Imaj 1.1: Plis paseview of the WORKPRO 7.2V Electric Pruning Shears and its USB-C charging cable.
2. Enfòmasyon sou Sekirite
Toujou bay sekirite priyorite lè w ap itilize zouti elektrik. Si ou pa swiv enstriksyon sa yo, ou ka pran chòk elektrik, pran dife ak/oswa blesi grav.
Avètisman Sekirite Jeneral:
- Li tout enstriksyon yo: Familiarize yourself with the tool's operation and safety features.
- Kenbe Zòn Travay la Apwòp: Zòn ankonbre oswa nwa yo envite aksidan.
- Evite anviwònman danjere: Pa sèvi ak zouti elektrik nan damp oswa kote ki mouye, oswa ekspoze yo a lapli.
- Mete Ekipman Pwoteksyon Pèsonèl (EPI) ki Apwopriye: Always wear safety glasses, gloves, and sturdy footwear.
- Rete Alèt: Pay attention to what you are doing and use common sense. Do not operate the tool when tired or under the influence of drugs, alcohol, or medication.
- Fikse pyès travay la: Sèvi ak clamps oswa lòt fason pratik pou fikse pyès la sou yon platfòm ki estab.
- Pa depase: Kenbe bon pye ak balans tout tan.
- Store Idle Tools: When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.
- Antretyen zouti yo avèk swen: Kenbe zouti koupe yo byen file epi pwòp pou yon pi bon pèfòmans ak yon pi bon sekirite. Swiv enstriksyon yo pou wilaj ak chanje akseswa yo.
- Tcheke pou pati ki domaje: Anvan ou itilize yon lòt pyès pwoteksyon oswa yon lòt pati ki domaje, ou ta dwe tcheke avèk anpil atansyon si l ap fonksyone byen epi si l ap fè fonksyon li te dwe fè a.
Specific Pruner Safety:
- Blade Hazard: The blades are extremely sharp. Keep fingers and body parts away from the blades during operation.
- Dual Switch Operation: This tool features a dual-action switch for safety. Both the main trigger and the safety switch must be pressed simultaneously to operate the blades. Keep the switch pressed throughout the cutting operation.
- Deploge lè yo pa itilize: Always disconnect the charging cable when the tool is not in use, before servicing, or when changing accessories.
- Sekirite batri: Use only the specified charging method. Do not incinerate the battery or expose it to high temperatures.
3. Pwodwi souview ak Konpozan
The WORKPRO 7.2V Electric Pruning Shears are designed for efficient and effortless pruning tasks. Key features include:
- High-Quality SK5 Blades: Durable and sharp for clean cuts.
- Motè efikas: Provides powerful performance with reduced noise.
- Limyè ki ap dirije ki entegre: Illuminates the cutting area for improved visibility in low light.
- Konsepsyon ki lejè: Weighs approximately 1.9 pounds (0.86 kg) for comfortable, extended use.
- Dual Safety Switch: Anpeche aktivasyon aksidantèl.
- Maksimòm Koupe Kapasite: 20mm (0.8 inches) for fresh branches.
Imaj 3.1: Detaye view highlighting the maximum cutting capacity, special gear system, constant light, and safety protection features.
Image 3.2: Close-up of the SK5 blade, designed for smooth cuts without damaging bark.
Image 3.3: Illustration of the internal powerful motor, indicating high efficiency and strong load capacity.
4. Enstalasyon
Chaje batri a:
- Asire w ke sizay koupe yo etenn.
- Locate the Type-C charging port on the tool.
- Connect the provided USB-C charging cable to the port on the shears and plug the other end into a compatible USB power adapter (not included) or a USB port.
- The charging indicator light will show the charging status. A full charge typically takes 4-5 hours.
- Yon fwa konplètman chaje, dekonekte kab la chaje.
The tool is equipped with two 3.6V, 2000mAh Lithium-Ion batteries.
5. Operasyon Enstriksyon
Activating the Shears:
- Asire w ke batri a chaje.
- To activate the shears, first press the main trigger, then simultaneously press the safety switch located on the handle.
- Keep both switches depressed throughout the cutting operation. Releasing either switch will cause the blades to open immediately and the tool to stop.
Image 5.1: Proper hand placement for operating the dual safety switch, ensuring safe activation.
Pwosedi koupe:
- Mete branch ki pral koupe a ant lam ouvè yo.
- Ensure the branch diameter does not exceed 20mm (0.8 inches) for fresh branches. Attempting to cut thicker branches may damage the tool or result in an incomplete cut.
- Activate the shears as described above. The blades will close to make the cut.
- Release the switches to allow the blades to open for the next cut.
- For slightly thicker branches within the tool's capacity, multiple 'bites' can be taken to gradually cut through.
Image 5.2: Visual representation of the 20mm (0.8 inch) maximum cutting diameter for effective pruning.
Aplikasyon:
These electric pruning shears are suitable for a variety of gardening tasks, including:
- Pruning trees and shrubs
- Pruning fruit trees
- Pruning grapevines
- Pruning flowers and ornamental plants
- General garden and landscape maintenance
- Harvesting fruit
Imaj 5.3: Egzanpamples of multiple uses for the electric pruning shears in different gardening scenarios.
6. Antretyen
Regular maintenance ensures the longevity and optimal performance of your pruning shears.
- Netwayaj lam: After each use, wipe the blades clean with a damp cloth to remove sap, dirt, and debris. For stubborn residue, use a mild cleaning solution. Ensure blades are dry before storage.
- Lubrifikasyon lam: Periodically apply a light coat of machine oil or specialized blade lubricant to the cutting blades to prevent rust and ensure smooth operation.
- Depo: Store the pruning shears in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the safety switch is engaged and the blades are closed.
- Swen batri: Do not store the tool with a completely discharged battery. Recharge the battery periodically if the tool is not used for extended periods.
NAN. Depanaj
If you encounter issues with your WORKPRO Electric Pruning Shears, refer to the following common troubleshooting steps:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Shears do not turn on/operate | Batri egzeyate Sekirite switch pa angaje Main trigger not pressed | Chaje batri a konplètman Ensure both main trigger and safety switch are pressed simultaneously Check charging cable connection |
| Blades do not cut cleanly or get stuck | Lam yo mat oswa sal Koupe branch ki twò epè Sap or debris buildup | Clean and lubricate blades; consider professional sharpening if severely dull Ensure branch diameter is within 20mm (0.8 inches) capacity Clean blades thoroughly after each use |
| Tool stops unexpectedly (freezes up) | Pwoteksyon Surcharge aktive Batri ki ba Pwoblèm entèn | Release switches, allow tool to cool, then restart. Avoid forcing cuts on overly thick branches. Rechaje batri. Si pwoblèm nan pèsiste, kontakte sèvis kliyan. |
| Batri pa chaje | Kab chaje a oswa adaptè a gen pwoblèm Pò chaje a sal Pwoblèm batri | Eseye yon lòt kab USB-C ak adaptè kouran. Clean charging port gently Contact customer support if battery is suspected to be faulty |
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | WORKPRO |
| Nimewo Modèl | W159049AE |
| Sous pouvwa | Batri Powered |
| Voltage | 7.2 Volts |
| Wattage | 7.4 Watt-èdtan |
| Kalite batri | 2 pil ityòm-ion (enkli) |
| Materyèl lam | SK5 Metal |
| Manch Materyèl | Plastik, Nilon |
| Max Koupe Dyamèt | 20 mm (0.8 Inches) |
| Pwa atik | 1.9 liv (apeprè 0.86 kg) |
| Port chaje | Kalite-C |
| UPC | 820909605089 |
9. Garanti ak sipò
WORKPRO is committed to providing a positive customer experience. If you have any questions, concerns, or require assistance with your WORKPRO tools, please contact our customer support. Refer to your purchase documentation for specific warranty details and contact information.
For further assistance, please visit the official WORKPRO websit la oubyen kontakte vandè a dirèkteman.
