Memphis Audio PRX1000.1V2 Monoblock Subwoofer AmpManyèl itilizatè lifier

1. Enfòmasyon sou Sekirite

Please read all instructions carefully before installing and operating your Memphis Audio PRX1000.1V2 amplifizè. Si ou pa swiv direktiv sa yo, ou ka domaje li. amplifier, speakers, or vehicle, and may void your warranty.

• Enstalasyon pwofesyonèl rekòmande: For optimal performance and safety, professional installation by an authorized Memphis Audio dealer is highly recommended.
• Sous pouvwa: Asire w ke batri machin nan dekonekte anvan ou fè nenpòt koneksyon kouran pou evite kouran kout.
• Fil elektrik: Use appropriate gauge wiring for power, ground, and speaker connections as specified in this manual. Improper wiring can lead to overheating and damage.
• Montaj: Monte la amplifier securely in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate airflow around the amplifier.
• Nivo volim: Prolonged exposure to high volume levels can cause hearing damage. Always listen at moderate levels.
• Atè: A proper ground connection is crucial for amplifier stability and performance. Connect the ground wire directly to the vehicle's chassis, ensuring a clean, paint-free metal-to-metal contact.

2. Pwodwi souview

The Memphis Audio PRX1000.1V2 is a high-performance monoblock subwoofer amplifier designed to deliver powerful and precise bass. This amplifier is engineered for efficient power delivery, enhancing low-frequency performance in your vehicle's audio system. Its robust design is optimized for driving subwoofers effectively.

Figi 2.1: Top view of the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier. This image shows the sleek black casing with the illuminated Memphis logo.

2.1. Karakteristik kle

• Monoblock subwoofer ampkonsepsyon lifier.
• 1000 Watts RMS x 1 at 1-ohm for powerful and precise bass output.
• Optimized for efficient subwoofer driving.
• Efficient power delivery for enhanced low-frequency performance.
• Ideal for dedicated, high-powered subwoofer setups.

2.2. Pake kontni

Lè w ap debale, tanpri asire w ke tout bagay yo la:

• Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier
• Manyèl Itilizatè (dokiman sa a)
• Materyèl pou monte (vis, elatriye)
• Remote Bass Level Control (if included with your model)

3. Gid Enstalasyon

Proper installation is critical for the performance and longevity of your ampSi ou pa sèten sou nenpòt etap, konsilte yon enstalatè pwofesyonèl.

3.1. Kote aliye

Chwazi yon kote pou monte ki:

• Li sèk e li pa gen imidite.
• Allows for adequate airflow around the amplifier pou anpeche surchof.
• Li an sekirite epi pwoteje kont domaj fizik.
• Is not exposed to direct sunlight or excessive heat.

Common locations include under a seat, in the trunk, or behind a panel.

3.2. Koneksyon fil elektrik

Anvan ou fè nenpòt koneksyon, dekonekte tèminal negatif batri machin nan.

Figi 3.1: View of the power and speaker output terminals on the Memphis Audio PRX1000.1V2 amplifier. This side features connections for GND (Ground), REM (Remote Turn-On), +12V (Power), and Speaker Out.

1. Koneksyon pouvwa (+12V):

   Connect a heavy-gauge power wire (e.g., 4 AWG or larger, depending on total system power) directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an appropriate fuse holder (rated for the amplifier's current draw) within 18 inches (45 cm) of the battery.
2. Koneksyon tè (GND):

   Connect a heavy-gauge ground wire (same gauge as the power wire) from the GND terminal on the amplifier to a clean, solid metal point on the vehicle's chassis. Ensure the contact point is free of paint, rust, or dirt for an effective ground. The ground wire should be as short as possible, ideally less than 3 feet (1 meter).

3. Aktivite a distans (REM):

   Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output (usually a blue/white wire) to the REM terminal on the amplifizè. Fil sa a siyalize amplimen epi etenn ak inite prensipal ou a.

4. Speaker Output (SPEAKER OUT):

   Connect your subwoofer(s) to the SPEAKER OUT terminals. This is a monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to present a 1-ohm load for maximum power. Ensure correct polarity (+ to + and - to -) for all speaker connections.

Figi 3.2: View of the input and control panel on the Memphis Audio PRX1000.1V2 amplifier. This side includes RCA Input/Output, REM/DC/Audio switch, Input Level control, and Remote bass control port.

5. RCA Input (INPUT):

   Connect RCA cables from your head unit's subwoofer pre-out (or full-range pre-out if no dedicated subwoofer output is available) to the RCA INPUT terminals on the amplifier.
6. RCA Output (OUTPUT):

   The RCA OUTPUT terminals allow you to pass the audio signal to another amplifier nan yon milti-ampkonfigirasyon lifier.

7. Remote Bass Control (REMOTE):

   Connect the included remote bass level control to the REMOTE port. This allows for convenient adjustment of the subwoofer level from the driver's seat.

4. Operasyon Enstriksyon

4.1. Premye Limen

Apre tout koneksyon yo fin fèt epi verifye, rekonekte tèminal negatif batri machin nan. Limen inite prensipal ou a. amplifier should power on, indicated by an illuminated logo or power indicator.

4.2. Adjusting Input Level (Gain)

The INPUT LEVEL control (often referred to as gain) matches the ampsansiblite antre limifikatè a ak nivo pwodiksyon inite prensipal ou a. Se pa yon kontwòl volim.

1. Vire a amplifier's INPUT LEVEL control to its minimum (fully counter-clockwise) setting.
2. Mete volim inite prensipal ou a sou apeprè 75-80% nan nivo maksimòm li.
3. Play a dynamic piece of music with strong bass content.
4. Slowly increase the INPUT LEVEL control on the amplifier until you hear distortion, then back it off slightly until the sound is clean.
5. Avoid setting the gain too high, as this can lead to clipping and damage to your subwoofers.

4.3. REM/DC/Audio Switch

This switch controls how the amplifier turns on:

• REM: La amplifier turns on via the remote turn-on wire from the head unit. This is the standard and recommended method.
• DC: La amplifier senses a DC offset on the speaker-level inputs (if using a line output converter or high-level input) and turns on automatically.
• Odyo: La amplifier senses an audio signal on the RCA inputs and turns on automatically.

For most installations with an aftermarket head unit, set this switch to REM.

4.4. Remote Bass Level Control

The remote bass control allows you to adjust the subwoofer output level conveniently from the driver's position without needing to access the amplifier dirèkteman.

5. Antretyen

The Memphis Audio PRX1000.1V2 ampLififier a mande mwens antretyen pou asire pèfòmans alontèm.

• Netwayaj: Siye detanzantan ampNetwaye deyò aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Koneksyon: Annually check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can cause intermittent performance or damage.
• Vantilasyon: Asire w ke amplifier's cooling fins are not obstructed by debris or other objects to maintain proper heat dissipation.

6. Gid Depanaj

Si ou gen pwoblèm ak ou amplifier, refer to the following common issues and solutions before contacting technical support.

7. Espesifikasyon

Key technical specifications for the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier:

• Modèl: PRX1000.1V2
• Kalite: Monoblock Subwoofer Amplifier
• Sorti pouvwa RMS: 1000 Watts x 1 at 1-Ohm
• Pwa atik: 4.9 liv
• Dimansyon pake: 10.8 x 7.6 x 4.2 pous
• Manifakti: Memphis Audio
• ASIN: B0CX9YJMT7
• Dat premye disponib: 27 fevriye 2024

8. Garanti ak sipò

8.1. Enfòmasyon sou Garanti

The Memphis Audio PRX1000.1V2 amplifier vini ak yon 1-ane garanti manifakti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear.

For specific warranty terms and conditions, please refer to the documentation included with your product or contact Memphis Audio directly.

8.2. Sipò teknik

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Memphis Audio customer support or your authorized Memphis Audio dealer. You can typically find contact information on the manufacturer's official websit.

When contacting support, please have your product model number (PRX1000.1V2) and proof of purchase readily available.