Huskie Tools Robo Crimp 6 Ton Battery Powered Inline Latch Crimper (ECO-EZ558) User Manual

1. Entwodiksyon

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of the Huskie Tools Robo Crimp 6 Ton Battery Powered Inline Latch Crimper, model ECO-EZ558. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury or damage.

The ECO-EZ558 is a 6-ton streamline battery-powered compression tool designed for crimping commonly used service entrance connectors, lugs, sleeves, H-taps, and C-taps. Its compact design and swivel head allow for use in limited access areas. The tool features a built-in, factory pre-set 6-ton bypass cartridge to ensure complete compression with every use. It accepts "W", "O" or "X" type dies, and "D3" nest dies are included as standard.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Li tout avètisman sekirite, enstriksyon, ilistrasyon, ak espesifikasyon yo bay zouti elektrik sa a. Si w pa swiv tout enstriksyon ki endike anba la yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and protective clothing.
• Asire w ke zòn travay la pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan.
• Pa opere zouti elektrik nan atmosfè eksplozif, tankou nan prezans likid ki ka pran dife, gaz, oswa pousyè.
• Kenbe timoun yo ak moun ki t ap gade yo lwen pandan w ap opere yon zouti elektrik. Distraksyon ka lakòz ou pèdi kontwòl.
• Evite demaraj sanzatann. Asire w ke switch la nan pozisyon "off" anvan ou konekte l ak pake batri a, anvan ou ranmase l oswa anvan ou pote zouti a.
• Sèvi ak zouti ki kòrèk la pou aplikasyon w lan. Pa fòse zouti a.
• Dekonekte pake batri a nan zouti a anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Kenbe zouti elektrik ak Pwodwi pou Telefòn. Tcheke si gen move aliyman oswa mare pati k ap deplase yo, pati yo kase, ak nenpòt lòt kondisyon ki ka afekte operasyon zouti elektrik la.
• Sèvi ak zouti elektrik la, Pwodwi pou Telefòn, ak Bits zouti an akò ak enstriksyon sa yo, pran an konsiderasyon kondisyon yo travay ak travay la dwe fèt.
• Only use battery packs and chargers specified by the manufacturer.

3. Pake kontni

Verifye ke tout atik yo prezan epi yo pa domaje lè w ap debale yo:

• 1 x Huskie Tools Robo Crimp 6 Ton Battery Powered Inline Latch Crimper (ECO-EZ558)
• 2 x BP-82 Batteries
• 1 x batri Charger
• 1 x pote sak
• D3 Nest Dies (pre-installed or included separately)

4. Pwodwi souview

Familiarize yourself with the components of your ECO-EZ558 crimper.

Figi 1: Huskie Tools ECO-EZ558 Robo Crimp 6 Ton Battery Powered Inline Latch Crimper. This image shows the full tool, highlighting its compact design, red housing, and the crimping head at the top.

Figi 2: Fèmen view of the ECO-EZ558 crimping head. The image details the latching mechanism and the open jaws, ready for connector insertion. The head can rotate 180 degrees for optimal maneuverability.

Karakteristik kle:

• Latching Head: Features a 1.8-inch jaw opening for easy connector insertion and consistent, uniform crimps.
• 6 Ton Force: Provides powerful crimping capability.
• Die Compatibility: Accepts all "W", "X", and "O" type dies. Comes standard with D3 Nest Dies.
• Versatile Crimping: Capable of crimping #8 to 500 MCM Copper and #8 to 350 MCM Aluminum conductors.
• Aplikasyon: Suitable for commonly used service entrance connectors, lugs, sleeves, H-taps, and C-taps.
• Bypass Cartridge: A built-in, factory pre-set 6-ton bypass cartridge ensures complete compression every time.
• Konsepsyon ergonomique: Lightweight and compact for one-handed operation and maneuverability in tight spaces.

5. Enstalasyon

5.1 Chaje batri a

1. Konekte chargeur a nan yon priz elektrik estanda.
2. Insert the BP-82 battery into the charger. Ensure it is seated correctly.
3. Kite batri a chaje nèt. Gade limyè endikatè plato a pou wè eta chaj la.
4. Yon fwa li chaje, retire batri a nan plato a.

5.2 Enstale batri a

1. Ensure the tool's ON/OFF switch is in the OFF position.
2. Align the charged battery pack with the battery slot at the base of the tool.
3. Glise batri a nan fant lan jiskaske li fè yon klik byen fèm nan plas li.

5.3 Installing/Changing Dies

The ECO-EZ558 accepts "W", "X", and "O" type dies. D3 Nest Dies come standard.

1. Ensure the tool is powered off and the battery is removed.
2. Open the latching head jaws.
3. Carefully insert the appropriate crimping dies into their respective slots in the jaws. Ensure they are seated flush and securely.
4. Close the latching head.

6. Operasyon Enstriksyon

6.1 Preparing for Crimping

1. Select the correct crimping dies for the conductor and connector size.
2. Ensure the conductor is properly stripped to the recommended length for the connector.
3. Mete kondiktè a nan konektè a.

6.2 Performing a Crimp

1. With the battery installed and the correct dies in place, open the latching head jaws.
2. Position the connector and conductor assembly within the crimping dies. Ensure the connector is centered and fully seated in the dies.
3. Close the latching head securely around the connector. The 180-degree rotating head can be adjusted for optimal access in tight spaces.
4. Press the trigger to initiate the crimping cycle. The tool will apply 6 tons of force.
5. The built-in bypass cartridge will ensure a complete compression. The tool will automatically stop when the crimp is complete.
6. Release the trigger and open the latching head jaws to remove the crimped connector.
7. Inspect the crimp for proper formation and security.

Nòt: The tool is designed for one-handed operation due to its lightweight and ergonomic design.

7. Antretyen

Regular maintenance ensures the longevity and reliable performance of your crimper.

• Netwayaj: After each use, clean the tool, especially the crimping head and dies, to remove any debris, dirt, or residue. Use a clean, dry cloth. Do not use harsh chemicals or solvents.
• Lubrifikasyon: Periodically apply a light coat of machine oil to the moving parts of the crimping head and die slots to ensure smooth operation.
• Swen batri: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries regularly, even if not in use, to maintain their health.
• Enspeksyon: Regularly inspect the tool for any signs of wear, damage, or loose components. Check the dies for wear or deformation. Replace damaged parts immediately.
• Depo: Store the tool and accessories in the provided carrying bag in a dry, secure location, away from moisture and direct sunlight.

NAN. Depanaj

9. Espesifikasyon

Figi 3: Detailed specifications for the Huskie Tools ECO-EZ558 Robo Crimp tool, including crimp force, weight, size, jaw opening, and connector ranges.

10. Garanti ak sipò

For warranty information, technical support, or service inquiries, please contact Huskie Tools directly. Keep your purchase receipt as proof of purchase.

• Manifakti: Huskie Tools
• Websit: www.huskietools.com
• Enfòmasyon pou kontakte: Refer to the official Huskie Tools websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.

Pwodui sa a soti nan yon mak pou ti biznis. Sipòte ti biznis yo.

11. Enfòmasyon sou jete

Do not dispose of electrical appliances, batteries, or packaging materials with household waste. Please recycle where facilities exist. Check with your local authority for recycling advice.

• Batri: Lithium-ion batteries should be recycled or disposed of according to local regulations. Do not incinerate.
• Zouti: At the end of its service life, the tool should be returned to a designated collection point for the recycling of electrical and electronic equipment.