1. Entwodiksyon
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Sunco 4ft LED Shop Light
2. Enfòmasyon sou Sekirite
Pou diminye risk lanmò, blesi pèsonèl, oswa domaj materyèl ki soti nan dife, chòk elektrik, pyès ki tonbe, koupe, fwotman, ak lòt danje, tanpri li tout avètisman ak enstriksyon ki enkli nan bwat aparèy la epi ki sou li ansanm ak tout etikèt aparèy la.
- AVÈTISMAN: Risk pou chòk elektrik. Disconnect power at the fuse or circuit breaker before installation or servicing.
- AVÈTISMAN: Risk pou dife. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
- WARNING: Risk of Injury. Mete linèt sekirite ak gan pandan enstalasyon ak sèvis.
- Aparèy sa a fèt pou itilize andedan kay la sèlman. Do not use in wet locations or where directly exposed to water.
- Enstalasyon sa a se ki pa dimmable. Do not connect to a dimmer switch.
- Pa modifye aparèy la. Nenpòt modifikasyon ka anile garanti a epi kreye danje pou sekirite.
- Asire rezèv la voltage is compatible with the fixture (120V-277V).
3. Pake kontni
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Enstalasyon ak Enstalasyon
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Prepare Kote pou Monte a: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Enstale pyès ki nan konpitè pou monte yo: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Konekte fil yo: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Aparèy sekirite: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Image 4.1: Installation Steps
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.
Image 4.2: Daisy Chain Connection Point
5. Operasyon Enstriksyon
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.
Image 5.1: Selectable CCT Options
6. Antretyen
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Netwayaj: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- Poul: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
NAN. Depanaj
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen | Pa gen ekipman pou pouvwa Fil elektrik ki pa kòrèk CCT switch not set | Tcheke disjonktè a ak switch miray la. Verify all wire connections are secure and correct. Ensure the CCT switch is set to a valid color temperature. |
| Limyè flickers | Ekipman pou pouvwa enstab Koneksyon fil elektrik ki lach | Asire w ke ekipman pou pouvwa a estab epi li nan limit vòltaj espesifye a.tage ranje. Tcheke tout koneksyon fil yo pou wè si yo byen sere. |
| Limyè pa klere jan yo espere | Anrejistreman CCT ki pa kòrèk Dust or debris on lens | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Espesifikasyon
| Mak | Sunco ekleraj |
| Nimewo Modèl | WR_PR8-WH-4060K-2PK |
| Dimansyon pwodwi | 48"L x 8.58"L x 2.56"H |
| Wattage | 60W |
| Klète | 7200 Lumen |
| Efikasite | 118 LM/W |
| Tanperati Koulè (CCT) | Selectable 4000K, 5000K, 6000K |
| Voltage | 120V-277V |
| Dimmable | Non |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la sèlman |
| Kalite enstalasyon | Flush Mount |
| Karakteristik espesyal | Koneksyon |
| Kalite sous limyè | dirije |
| Materyèl | Alloy Steel, Polycarbonate |
| Mwayèn lavi | 50,000 èdtan |
| Sètifikasyon | ETL, FCC, RoHS |
| Kantite Atik | 2 (Pake) |
9. Garanti ak sipò
Sunco Lighting stands behind the quality of its products.
- Garanti: Pwodui sa a apiye pa yon 3-ane garanti apati dat acha a. Tanpri konsève prèv acha ou pou reklamasyon garanti.
- Sipò Kliyan: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.
