Entwodiksyon
This manual provides instructions for the safe installation, operation, and maintenance of your Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight, Model MRL-S20803SBW. This fixture is designed for residential and commercial indoor applications, offering adjustable color temperature and dimming capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Enfòmasyon sou Sekirite
WARNING: RISK OF ELECTRIC SHOCK. DISCONNECT POWER AT THE CIRCUIT BREAKER BEFORE INSTALLATION OR SERVICING.
- Tout koneksyon elektrik yo dwe an akò avèk estanda lokal yo ak Kòd Elektrik Nasyonal la (NEC). Konsilte yon elektrisyen kalifye si ou pa abitye avèk koneksyon fil elektrik ki kòrèk yo.
- This fixture is intended for installation in ceilings only.
- Do not modify the fixture or use it for purposes other than its intended use.
- Asire rezèv la voltage se 120VAC.
- This product is IC Rated, suitable for direct contact with insulation.
- Aparèy sa a se Damp Rated, suitable for use in bathrooms and kitchens where moisture may be present.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- 1 x Maxxima 2-inch Square LED Downlight Fixture (White Trim, Black Baffle)
- 1 x Remote Junction Box with Integrated CCT Selectable Switch
- 1 x Foam Gasket (pre-attached or included)
This image displays the complete Maxxima 2-inch square LED downlight unit, including the main fixture with its white trim and deep-set black baffle, and the connected external junction box.
Enstalasyon ak Enstalasyon
Swiv etap sa yo pou enstalasyon apwopriye:
Zouti obligatwa:
- Fil retire rad sou ou
- Tournevis (Phillips ak Flathead)
- Hole Saw or Template (2.5-inch diameter)
- Mezire tep
Etap enstalasyon:
- Etenn pouvwa: Locate the circuit breaker controlling the area where the downlight will be installed and turn off the power. Verify power is off using a voltage tèsteur.
- Prepare Ceiling Opening: Using a 2.5-inch hole saw or template, cut a circular opening in the ceiling at the desired location. Ensure there are no obstructions (e.g., joists, pipes) behind the cutting area.
- Access Junction Box: Open the cover of the remote junction box.
- Koneksyon fil elektrik: Connect the household electrical wires to the junction box wires. Use appropriate wire connectors (not included) to secure the connections:
- Connect the black (Live) wire from the supply to the black wire of the junction box.
- Connect the white (Neutral) wire from the supply to the white wire of the junction box.
- Connect the green or bare copper (Ground) wire from the supply to the green wire of the junction box.
This image displays the interior of the junction box with its cover open, revealing the wiring terminals for electrical connections (black, white, green) and the prominent 5 CCT selector switch.
- Chwazi Tanperati Koulè (CCT): Before closing the junction box, use the switch located on the side of the junction box to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
Yon agrandi view of the 5 CCT switch on the side of the junction box, clearly showing the selectable color temperature options: 2700K, 3000K, 3500K, 4000K, and 5000K.
This image illustrates the key feature of 5 CCT (Correlated Color Temperature) selection. It shows the downlight fixture alongside a magnified view of the switch located on the junction box, indicating options for 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight).
- Bwat Koneksyon Ansekirite: Close the junction box cover and secure it. Place the junction box into the ceiling cavity, ensuring it is not pinched or stressed.
- Konekte aparèy la nan bwat koneksyon an: Connect the male connector from the downlight fixture to the female connector on the junction box's installation cord. Ensure a secure connection.
- Insert Downlight Fixture: Gently push the spring-loaded clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling opening. Release the clips to secure the fixture flush against the ceiling. The foam gasket will help create a tight seal.
Do a view of the Maxxima 2-inch square LED downlight, revealing the heat sink fins for thermal management and the spring-loaded clips used for securing the fixture in the ceiling.
- Retabli pouvwa: Yon fwa aparèy la byen enstale, retabli kouran an nan disjonktè a.
A lifestyle image demonstrating several Maxxima 2-inch square LED downlights seamlessly integrated into the ceiling of a contemporary kitchen and living space, providing ambient lighting.
Enstriksyon Operasyon
Your Maxxima LED Downlight is designed for simple operation:
- Limen/Etenyen: The downlight is controlled by a standard wall switch connected to the electrical circuit.
- Dimming: This fixture is compatible with most standard LED dimmers, allowing for a dimmable range of 20% to 100%. Ensure your dimmer is compatible with LED lighting for optimal performance.
- Seleksyon Tanperati Koulè: The color temperature (CCT) is set using the switch on the junction box during installation. It cannot be changed without accessing the junction box.
A detailed close-up of the Maxxima 2-inch square LED downlight after installation, showing the white trim flush with the ceiling and the black baffle housing the illuminated LED.
Antretyen
The Maxxima LED Downlight requires minimal maintenance:
- Netwayaj: Pou netwaye aparèy la, asire w ou pa gen kouran. Siye sifas la ak yon twal mou, sèk, oubyen yon ti kras mouye.amp twal. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki agresif, paske sa yo ka domaje fini an oswa konpozan elektrik yo.
- Pa gen okenn pati itilizatè yo ka fè sèvis: Sous limyè LED la entegre epi ou pa ka ranplase li. Pa eseye ouvri oswa repare aparèy la.
Depanaj
Si ou rankontre pwoblèm ak downlight ou a, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Pa gen pouvwa nan aparèy la. Koneksyon fil elektrik ki lach. Incorrect CCT switch setting. | Tcheke disjonktè a ak switch miray la. Verify all wire connections in the junction box are secure (ensure power is off first). Confirm CCT switch on junction box is set to a valid position. |
| Limyè a tranble oswa li diminye yon fason ki pa konsistan. | Entèriptè gradatè ki pa konpatib. Koneksyon fil elektrik ki lach. | Asire w ke w ap itilize yon gradateur ki konpatib ak LED. Tcheke tout koneksyon fil yo (lè kouran an etenn). |
| Tanperati koulè ki pa kòrèk. | Switch CCT a pa byen regle. | Access the junction box (power off) and adjust the CCT selection switch to the desired setting. |
Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | Maxxima |
| Nimewo Modèl | MRL-S20803SBW |
| Konsomasyon pouvwa | 9 Watts |
| Klète | 500 Lumen |
| Antre Voltage | 120VAC |
| Tanperati Koulè (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| Endèks rann koulè (CRI) | 90 |
| Ranje gradyasyon | 20% - 100% (with compatible LED dimmer) |
| Dimansyon Aparèy Enstalasyon (L x W x H) | 3.16" x 3.16" x 2.6" |
| Junction Box Dimensions (H x W x D) | 1.25" x 3.4" x 3.4" |
| Recommended Hole Cutout | 2.5 pous |
| Materyèl | Aliminyòm |
| Fini | White Trim, Black Baffle |
| Sètifikasyon | Lis ETL, Rated IC |
| Anviwònman Rating | Damp Rated (Indoor Use) |
| Gaye Kwaze | 36° |
| Pwa atik | 10.72 ons |
A technical diagram illustrating the physical dimensions of the Maxxima 2-inch square LED downlight, with measurements of 3.16 inches in length, 3.16 inches in width, and 2.6 inches in height.
Garanti ak sipò
This Maxxima LED Downlight is backed by a 3-ane garanti apati dat acha a, ki kouvri domaj nan materyèl ak nan atizan konn fè anba itilizasyon nòmal.
For technical assistance, warranty claims, or product inquiries, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima websit pou jwenn enfòmasyon kontak aktyèl.
