Thermalright TL-C12B-S V3 X3 120mm ARGB Case Fan Instruction Manual

1. Entwodiksyon

This manual provides essential information for the proper installation, operation, and maintenance of your Thermalright TL-C12B-S V3 X3 120mm ARGB Case Fan. Please read this guide thoroughly before proceeding with installation to ensure optimal performance and longevity of your product.

2. Pwodwi Features

• 120mm ARGB Fan: Designed for efficient cooling with customizable Addressable RGB lighting.
• Kote yo pote: S-FDB Features a Fluid Dynamic Bearing with magnetic design for stable, low-friction, and low-noise operation, extending fan lifespan.
• Kontwòl PWM: 4-pin PWM connector allows for precise fan speed control, balancing cooling performance and noise levels.
• ARGB Mirror Light Effect: Provides a unique visual experience with unlimited mirror ARGB aperture lighting effects.
• High Airflow & Static Pressure: Optimized 9-blade design delivers up to 66.17 CFM airflow at 1500 RPM and 1.53mm H2O air pressure.
• Absòpsyon Vibrasyon: Equipped with soft-touch rubber pads on corners to reduce noise and vibration.
• Konstriksyon dirab: Fan blades and frame are made from industrial-grade PBT+PC material for strength and stability.
• Aplikasyon versatile: Suitable for PC cases, CPU air coolers, and water cooling radiators.

3. Espesifikasyon

4. Pake kontni

• Thermalright TL-C12B-S V3 X3 120mm ARGB Case Fan (Quantity as per kit)
• Montaj Vis
• Adhesive Nails

Note: The fan wire is made of flame-retardant compiled mesh-wrapped wire for added safety.

5. Gid Enstalasyon

Follow these steps to properly install your Thermalright TL-C12B-S V3 X3 ARGB Case Fan. For a visual guide, please refer to the embedded video below.

5.1. Video Installation Guide

5.2. Connecting Fan Power (PWM)

1. Identify the 4-pin PWM fan power connector on your fan. This connector controls the fan speed.
   

   Image: Close-up of the 4-pin PWM fan power connector.

2. Connect the 4-pin PWM connector to an available 4-pin fan header on your motherboard. Ensure correct orientation.
   

   Image: A 4-pin PWM fan connector plugged into a motherboard fan header.

3. If installing multiple fans and wish to sync their speeds, use the provided PWM sharing connector to daisy-chain additional fans. Connect the additional fan's PWM connector to the sharing header.

5.3. Connecting ARGB Lighting

1. Locate the 3-pin +5V Addressable RGB (ARGB) connector on your fan. This connector controls the lighting effects.
   

   Image: Close-up of the 3-pin ARGB connector and details of the S-FDB bearing and rubber pads.

2. Connect the 3-pin ARGB connector to an available +5V ARGB header on your motherboard. Ensure correct pin alignment (do not connect to 12V RGB headers).
3. To synchronize ARGB lighting effects across multiple fans, use the provided ARGB sharing connector to daisy-chain additional fans. Connect the additional fan's ARGB connector to the sharing header.

5.4. Enstalasyon Fizik

1. Determine the desired airflow direction. For normal airflow design fans, the blade side typically indicates intake, and the frame side indicates exhaust. Install fans according to your PC case's airflow requirements.
   

   Image: Illustration of fan placement for optimal case airflow.
2. Position the fan in the desired mounting location (e.g., front, top, rear, bottom of the case, or on a CPU cooler/radiator).
   

   Imaj: Egzamples of fan installation for case airflow, air cooling, and water cooling radiators.

3. Secure the fan using the included mounting screws or adhesive nails, depending on your case and preference. Ensure the fan is firmly attached to prevent vibration.
4. Manage cables neatly to avoid interference with other components and to maintain good airflow within the case.

6. Operasyon Enstriksyon

Once installed, the fan's operation is controlled via your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.

• Kontwòl vitès fanatik (PWM): Access your motherboard's BIOS/UEFI or fan control software to adjust the fan speed curve. This allows you to set fan speeds based on CPU or system temperatures, optimizing for either quiet operation or maximum cooling.
• Kontwòl ekleraj ARGB: Use your motherboard's ARGB control software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization with other ARGB components.

Image: Thermalright TL-C12B-S V3 X3 ARGB fan showcasing its mirror light effect.

7. Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje lavi fanatik ou an.

• Netwayaj: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft brush. Ensure the PC is powered off and unplugged before cleaning.
• Portant: The S-FDB bearing is designed for maintenance-free operation. Do not attempt to disassemble the fan for lubrication or repair, as this may void the warranty.

NAN. Depanaj

9. Garanti ak sipò

Pwodwi Thermalright yo fabrike selon estanda kalite siperyè. Pou enfòmasyon sou garanti, sipò teknik, oswa demann sèvis, tanpri al gade paj ofisyèl Thermalright la. websit la oubyen kontakte distribitè lokal ou a. Kenbe prèv acha ou pou reklamasyon garanti.