NETVIP 300Mbps WiFi Repeater User Manual

1. Entwodiksyon

The NETVIP 300Mbps WiFi Repeater is designed to extend the coverage of your existing wireless network, eliminating Wi-Fi dead zones and providing a strong, reliable connection throughout your home or office. This device supports both Repeater Mode for extending an existing Wi-Fi signal and AP (Access Point) Mode for creating a new Wi-Fi network from a wired connection. It is compatible with all standard Wi-Fi routers (IEEE 802.11n/g/b) and features a convenient WPS function for easy setup.

Figure 1.1: NETVIP WiFi Repeater plugged into a wall outlet, showing its compact design and indicator lights.

2. Pake kontni

• 1 x NETVIP WiFi Repeater
• 1 x Kab Rezo RJ45
• 1 x manyèl itilizatè

3. Enstalasyon

3.1 Enstalasyon Fizik

Plug the NETVIP WiFi Repeater into a standard electrical outlet in the area where you want to extend your Wi-Fi coverage. Ensure the device is within range of your existing router's Wi-Fi signal for optimal performance in Repeater Mode.

Figure 3.1: The NETVIP WiFi Repeater being plugged into a wall socket, ready for operation.

3.2 WPS One-Touch Setup (Repeater Mode)

The WPS (Wi-Fi Protected Setup) function allows for a quick and easy connection to your existing router without manual configuration.

1. Plug the Repeater into a power outlet. Wait for the power indicator light to stabilize.
2. Peze bouton WPS la sou routeur lame ou a.
3. Within 2 minutes, press the WPS button on the NETVIP WiFi Repeater. The WPS indicator light on the repeater will flash.
4. Wait for 1-2 minutes for the connection to establish. The signal strength indicator lights on the repeater will illuminate, indicating a successful connection.

Figure 3.2: Visual guide for WPS one-touch connection, illustrating the steps to connect the repeater to your router.

3.3 Manual Setup via Web Entèfas

If your router does not support WPS, or for advanced configuration, you can set up the repeater via its web koòdone.

1. Plug the Repeater into a power outlet.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (e.g., "Wireless-N" or "NETVIP_XXXX"). No password is required initially.
3. Louvri a web navigatè a epi antre adrès IP pa defo a (anjeneral 192.168.10.1) or the default web address (check the included manual for specifics, often ap.setup or repeater.setup).
4. Konekte avèk non itilizatè ak modpas default la (anjeneral admin/admin).
5. Follow the on-screen wizard to select your desired mode (Repeater or AP).
6. For Repeater Mode: Select your existing Wi-Fi network from the list, enter its password, and optionally change the repeater's SSID (network name) and password.
7. For AP Mode: Connect an Ethernet cable from your main router to the repeater's RJ45 port. Then, configure a new Wi-Fi network name (SSID) and password for the repeater.
8. Save the settings and wait for the repeater to restart. Your devices can now connect to the extended or new Wi-Fi network.

Figure 3.3: Explanation of Repeater Mode (extending existing Wi-Fi) and AP Mode (creating new Wi-Fi from wired connection).

4. Opere Aparèy la

4.1 Endikatè ki ap dirije

The repeater features several LED indicators to show its status:

• Pouvwa dirije: Endike si aparèy la limen.
• WPS dirije: Flashes during WPS setup, solid when WPS connection is active.
• Wi-Fi/Signal LED: Indicates Wi-Fi activity and signal strength. Multiple lights usually mean a stronger signal.
• LAN dirije: Endike aktivite sou pò Ethernet la.

4.2 Konekte Aparèy

Once the repeater is set up, you can connect your wireless devices (smartphones, tablets, laptops, smart TVs, gaming consoles, etc.) to the extended Wi-Fi network. The network name (SSID) will be either the same as your main router (if you chose to keep it) or a new one you configured during setup.

Figure 4.1: The repeater supports connection for up to 20 devices, including phones, pads, laptops, smart bulbs, smart plugs, and smart cameras.

4.3 Plasman Optimal

For best performance, place the repeater halfway between your router and the area where you need improved Wi-Fi coverage. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.

Figure 4.2: Illustration of how the repeater extends Wi-Fi coverage throughout a multi-story home, showing signal ampzòn lifikasyon yo.

5. Antretyen

5.1 Netwayaj

To maintain optimal performance, periodically clean the exterior of the repeater with a soft, dry cloth. Do not use liquid cleaners or aerosols.

5.2 Reyajiste Aparèy la

If the device is not functioning correctly or you wish to revert to factory settings, you can perform a factory reset. Locate the small "Reset" button (often recessed) on the device. Use a paperclip or a thin object to press and hold the button for approximately 5-10 seconds until the indicator lights flash, then release. The device will restart with factory default settings.

NAN. Depanaj

7. Espesifikasyon

• Mak: NETVIP
• Modèl: B0CTLS6ZBT
• Estanda kominikasyon san fil: 802.11n
• Pousantaj transfè done: 300 Megabits per Second
• Gwoup Frekans: 2.4 GHz
• Karakteristik espesyal: WPS, AP Mode, Fast Ethernet Port (RJ45)
• Koulè: Nwa
• Pwa atik: 170 gram
• Dimansyon: Approximately 12.6 x 9.6 x 7.4 cm (Packaging)

8. Garanti ak sipò

NETVIP products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official NETVIP websit la. Tanpri konsève prèv acha ou a pou reklamasyon garanti.

Pou plis asistans, ou ka kontakte tou magazen kote ou te achte pwodwi a.