1. Entwodiksyon
This user manual provides essential information for the safe and efficient operation of your Anern 4200W Hybrid Solar Inverter. This all-in-one pure sine wave inverter integrates solar energy storage and charging, capable of producing stable AC sine waves. It features a 120A MPPT solar charge controller with optimized MPPT technology for up to 98% efficiency. Please read this manual thoroughly before installation and use.
Figure 1: Anern 4.2KW Hybrid Solar Inverter, showing the main unit and included Wi-Fi module.
2. Karakteristik kle
- Tout-an-yon konsepsyon: Integrates solar energy storage, charging, and AC output functions.
- Kontwolè MPPT ki gen gwo efikasite: Li gen yon kontwolè chaj solè MPPT 120A ak yon efikasite jiska 98%.
- Pi bon kalite pwodiksyon vag sinis: Provides stable and high-quality AC power suitable for various household and office loads, including sensitive electronics.
- Siveyans Adistans: Equipped with an LCD screen and 4 LED indicators for dynamic system data display. Supports Wi-Fi/GPRS remote monitoring (Wi-Fi module included).
- Mòd chaje miltip: Offers 4 optional charging modes: Solar, Solar & Utility, Solar First.
- Mòd Sòti Fleksib: Provides 3 output modes: Solar First, Utility First, SBU mode.
- Smart Battery Charger: Designed with an intelligent battery charger to optimize battery performance and extend battery life.
- Pwoteksyon konplè: Includes protection against overcharge, overheating, short circuits, overcurrent, low voltage, ak Surcharge.
- Lajè konpatibilite: Compatible with various battery types and generator power.
Figure 2: Illustration of the inverter's multiple protection features, including overcurrent, low voltage, short circuit, overheating, and overload protection.
Figure 3: The inverter supports Wi-Fi monitoring, allowing system operation to be controlled and viewed via a mobile phone (iOS/Android).
Figure 4: The inverter supports various battery types including GEL, AGM, FLD, and Lithium. Note: The inverter can be used without batteries. If using a lithium battery, ensure it is configured as "User-defined" in program 05. It can only connect to a BMS PACE, not BMS from other manufacturers. The inverter cannot communicate with other battery brands.
Figure 5: The inverter offers three charge modes (Solar Priority, Solar + Utility, Solar-Battery) and two output modes (Solar First, Utility First) to meet diverse user application requirements.
3. Enstalasyon ak Enstalasyon
3.1 Prekosyon sekirite
- Ensure all connections are secure and correct before powering on the unit.
- Enstalasyon ta dwe fèt pa pèsonèl kalifye.
- Do not expose the inverter to rain, snow, spray, or any liquids.
- Asire bon vantilasyon toutotou envèstisè a pou anpeche li chofe twòp.
- Always disconnect all power sources (PV, battery, AC) before performing any maintenance or wiring.
3.2 Pwodwi souview ak Koneksyon
Familiarize yourself with the inverter's components and connection points.
Figi 6: Pwodwi souview showing the front and rear panels with labeled components:
- LCD Display
- Ekspozisyon estati
- Endikatè chaj
- Endikatè Erè
- Kle fonksyon
- On/Off switch
- AC antre
- Pwodiksyon prensipal la
- Dezyèm pwodiksyon
- Antre batri
- Antre PV
- Twous anti-pousyè
- RS-232 communication Connection / Wi-Fi connection
3.3 Dyagram fil elektrik
The following diagrams illustrate the recommended wiring for the inverter with solar panels, batteries, and AC loads.
Figure 7: Detailed connection diagram for the hybrid solar inverter. This diagram shows connections for solar panels (PV input), battery bank (24V), AC input (230V), and AC output (230V) to household appliances. Recommended cable sizes and fuse ratings are indicated.
- Kalite batri: Lead-acid / Lithium 24V
- Recommended Cable & Terminal Size: 2 AWG / Cable: 25mm²
- Fusible Rekòmande: 150A
- PV pouvwa: 4200W
- Max PV Open Circuit Voltage: 500VDC
- MPPT Voltage Range: 90VDC ~ 450VDC
- Kòmanse Voltage (Initial Charging): 120VDC
- Recommended PV Cable: 10 AWG / 6mm² (It is recommended to connect solar modules in series.)
- Antre AC: 230V AC
- Max AC Antre Voltage: 300V AC
- Max AC Charging Current: 160A
- Recommended AC Input Cable: 10 AWG / 6mm²
- Disjonktè Antre AC Rekòmande: 63A
- AC Sòti Pouvwa: 4200W
- AC Sòti Voltage: 220V / 230V
- Recommended AC Output Cable: 10 AWG / 6mm²
- Disjonktè Sòti AC Rekòmande: 63A
- REMAK: The output of the inverter is 230V. You can add a converter (not included) for 110V devices.
Figure 8: System diagram illustrating the integration of the Anern AN-SCI-ECO-4200 hybrid inverter with solar panels, external battery packs, utility grid/generator, and various home appliances. The diagram also shows the Wi-Fi monitoring capability via the PVguarder APP or Web koòdone.
4. Operasyon Enstriksyon
4.1 Limen/Etenyen
- To power on, ensure all connections are correct, then switch on the AC input breaker (if connected), followed by the battery breaker, and finally the inverter's ON/OFF switch.
- To power off, reverse the sequence: turn off the inverter's ON/OFF switch, then the battery breaker, and finally the AC input breaker.
4.2 Ekran LCD ak kle fonksyon
The LCD display provides real-time operational data. Use the function keys (refer to Figure 6, item 5) to navigate through menus and adjust settings.
- Ekspozisyon LCD: Shows system parameters such as input voltage, pwodiksyon voltage, estati batri, chaj percenttage, ak kòd erè.
- Status Indicators (LEDs): Provide quick visual cues for operational status.
- Kle Fonksyon: Used for menu navigation, setting adjustments, and confirming selections.
4.3 Operating Modes Configuration
The inverter supports various charging and output modes, configurable via the LCD display settings.
- Mòd Chaj:
- Priyorite Solè: Solar power is prioritized for charging batteries and powering loads.
- Solar + Utility: Both solar and utility power are used for charging and powering loads.
- Solar-Battery: Solar power charges the battery, and the battery powers the loads.
- Mòd pwodiksyon:
- Solè An Premye: Solar power is prioritized for loads.
- Itilite An Premye: Utility power is prioritized for loads.
- Mòd SBU (Solè-Batri-Itilite): Solar power is prioritized, then battery, then utility.
4.4 Wi-Fi Monitoring Setup
The included Wi-Fi module allows for remote monitoring and control. Refer to the separate Wi-Fi module manual for detailed setup instructions, including connecting to the PVguarder APP or Web koòdone.
5. Antretyen
- Netwayaj regilye: Keep the inverter clean and free from dust. Use a dry cloth to wipe the exterior. Ensure ventilation openings are not blocked.
- Enspeksyon koneksyon: Tcheke tout koneksyon elektrik yo detanzantan pou wè si yo sere epi si gen siy korozyon.
- Sante batri: Siveye batri voltage and performance regularly. Follow battery manufacturer's guidelines for maintenance.
- Kondisyon anviwònman: Asire w ke envèstisè a ap fonksyone nan limit tanperati ak imidite espesifye yo.
NAN. Depanaj
This section provides solutions to common issues. For problems not listed here, please contact customer support.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Envèstisè a pa limen. | Pa gen koneksyon batri, volim batri a batage, AC input not connected, or ON/OFF switch off. | Tcheke koneksyon batri ak voltage. Ensure AC input is connected and breakers are on. Turn on the inverter's ON/OFF switch. |
| Pa gen pwodiksyon AC. | Overload, short circuit, low battery, or incorrect output mode setting. | Reduce load. Check for short circuits in wiring. Recharge battery. Verify output mode settings on LCD. |
| PV charging not working. | Insufficient solar input, PV connection error, or MPPT controller fault. | Check solar panel connections and ensure adequate sunlight. Verify PV input voltage sou LCD. |
| Inverter making unusual noise. | Normal fan operation under load, or potential internal fault. | Some fan noise is normal. If noise is excessive or unusual, power off the unit and contact support. |
7. Espesifikasyon teknik
| Paramèt | Valè |
|---|---|
| Mak | Anern |
| Non modèl | AN-SCI-ECO-4200W with WIFI |
| Koulè | Orange |
| Pouvwa | 4.2 KW |
| Kapasite batri | 120 Amp-hours (Charge Controller) |
| Sous pouvwa | Solè ak pil mache |
| Itilizasyon Rekòmande | Lakay |
| Konpozan ki enkli | Modil Wi-Fi |
| Dimansyon pwodwi (L x W x H) | 52L x 45W x 21.5H cm (apeprè 20.5L x 17.7W x 8.5H pous) |
| Plòg pouvwa total | 1 |
| Max PV Open Circuit Voltage | 450VDC |
| Max PV pouvwa | 6200W |
| Volim maksimòm PV san chajtage | 500VDC |
| Maksimòm kouran chaj PV | 120A |
| Rated pwodiksyon aktyèl | 44.3A |
Figure 9: Product dimensions, showing height (420mm / 16.5"), width (350mm / 13.77"), and depth (110mm / 4.33").
8. Garanti ak sipò
Pwodwi sa a vini ak yon Garanti 1 an kont domaj manifakti. For any issues, technical support, or warranty claims, please contact the seller directly. Ensure you have your purchase details and product model number ready when contacting support.
Pou plis asistans, ou ka vizite tou Magazen Anern sou Amazon.
