ATTACK SHARK X3PRO 4K/8K Lightweight Wireless Gaming Mouse User Manual

1. Pwodwi souview

The ATTACK SHARK X3PRO is a high-performance lightweight wireless gaming mouse designed for precision and responsiveness. It features a Pixart PAW3395 optical sensor, Kailh GM8.0 switches, and offers tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.2).

2. Pake kontni

• ATTACK SHARK X3PRO Wireless Gaming Mouse
• USB-C USB-A chaje kab
• 2.4G USB Receiver (located on the bottom of the mouse)
• Adaptè Kalite-C pou USB-A
• Manyèl itilizatè

3. Enstriksyon Enstalasyon

3.1 Identifying Mouse Components

Familiarize yourself with the mouse components:

• Bouton DPI: Located on the bottom, used to cycle through DPI settings.
• Bouton switch mòd: Located on the bottom, allows switching between 2.4G, OFF, and BT modes.
• Limyè Endikatè Mòd: Provides visual feedback on the current connection mode and battery status.
• Reseptè USB: Stored in a compartment on the bottom of the mouse. Open the cover to access it.
• Flexible Paracord Cable: For wired connection and charging.
• Type-C to USB-A Adapter: For connecting the USB-C cable to a standard USB-A port.

3.2 Konekte Sourit la

The X3PRO supports three connection modes:

3.2.1 Mòd san fil 2.4GHz

1. Locate the USB receiver on the bottom of the mouse by opening its cover.
2. Mete reseptè USB 2.4G la nan yon pò USB ki disponib sou òdinatè w la.
3. Slide the mode switch on the bottom of the mouse to the '2.4G' position. The mode indicator light will illuminate.
4. Sourit la ta dwe konekte otomatikman ak òdinatè w la.

3.2.2 Mòd Bluetooth 5.2

1. Slide the mode switch on the bottom of the mouse to the 'BT' position. The mode indicator light will flash, indicating pairing mode.
2. Sou òdinatè w la, ouvri paramèt Bluetooth yo epi chèche nouvo aparèy.
3. Select 'ATTACK SHARK X3PRO' from the list of available devices to pair.
4. The mode indicator light will become solid once connected. The mouse supports connecting up to 4 devices simultaneously via Bluetooth.

3.2.3 Mòd Filaire

1. Connect the USB-C end of the charging cable to the front port of the mouse.
2. Connect the USB-A end of the cable (or via the Type-C to USB-A adapter) to your computer's USB port.
3. Slide the mode switch on the bottom of the mouse to the 'OFF' position. The mouse will operate in wired mode and charge simultaneously.

3.3 Driver Installation (Optional)

For full customization of the 5 programmable buttons, DPI settings, polling rate, LOD, and macros, download and install the official ATTACK SHARK X3PRO driver software from the manufacturer's website. The 8K wired and 4K wireless modes are plug-and-play for basic functionality.

4. Operasyon Enstriksyon

4.1 DPI Ajisteman

The mouse features 6 adjustable DPI levels. Press the DPI button on the bottom of the mouse to cycle through the preset DPI settings (800/1600/2400/3200/5000/26000). The mode indicator light may change color or flash to indicate the current DPI level, depending on the driver settings.

4.2 Pousantaj Sondaj

The X3PRO supports a wireless polling rate of up to 4000Hz and a wired polling rate of up to 8000Hz. A higher polling rate reduces input delay, providing a more responsive experience.

Polling Rate Requirement: For optimal 4K/8K polling rate performance, an Intel Core i5 or higher CPU / AMD Ryzen 5 or higher CPU and a USB 3.0 or higher port are recommended.

4.3 Jesyon batri

The X3PRO mouse can provide up to 68 hours of continuous game time on a full charge. When the battery is low, the mode indicator light will typically flash red. Connect the mouse using the USB-C cable to charge it. The mouse can be used in wired mode while charging.

5. Antretyen

5.1 Netwayaj

To maintain optimal performance, regularly clean your mouse. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the internal components. Avoid harsh chemicals or abrasive materials.

5.2 Mèt PTFE

The mouse is equipped with 100% virgin grade PTFE feet for a consistent glide. Keep the feet clean and free of debris to ensure smooth movement. If the feet become worn, replacement feet can be purchased from authorized retailers.

NAN. Depanaj

• Sourit la pa reponn:
  Ensure the mouse is charged. Check the mode switch on the bottom of the mouse to confirm it is set to the correct connection mode (2.4G, BT, or OFF for wired). For 2.4G, ensure the USB receiver is securely plugged in. For Bluetooth, verify pairing in your computer's settings. For wired mode, ensure the USB-C cable is properly connected.
• 2.4GHz Wireless Dongle Missing:
  The 2.4G USB receiver is located in a compartment on the bottom of the mouse. Open the small cover to access it. If it is genuinely missing from the package, contact customer support.
• DPI or Polling Rate issues:
  Ensure the mouse driver software is installed for advanced settings. Verify your computer meets the minimum requirements for 4K/8K polling rates (Intel Core i5/AMD Ryzen 5 or higher CPU, USB 3.0 port).
• Bouton yo pa fonksyone jan yo te espere a:
  If you have customized button functions, ensure the driver software is running and the settings are correctly applied. Reset the mouse to factory defaults via the software if necessary.
• Koneksyon tanzantan:
  Move the mouse closer to the receiver/computer. Avoid sources of interference (e.g., other wireless devices, large metal objects). Ensure the mouse is fully charged.

7. Espesifikasyon

8. Videyo pwodwi ofisyèl la

9. Garanti ak sipò

For warranty information and technical support, please refer to the documentation included with your product or visit the official ATTACK SHARK websit la. Kenbe prèv acha ou pou reklamasyon garanti.