XBrand 3-Tier Water Fountain (Model HD400) Instruction Manual

1. Entwodiksyon

Thank you for choosing the XBrand 3-Tier Water Fountain, Model HD400. This elegant freestanding water feature is designed to enhance your outdoor living space with the soothing sounds of flowing water. Constructed from durable fiber resin, this 51-inch tall fountain features a classic design with a pineapple top and an integrated auto shut-off pump for convenience and safety. This manual provides essential information for the proper setup, operation, and care of your new fountain.

Figure 1: The XBrand 3-Tier Water Fountain in brown, showcasing its design and water flow.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before installing and operating your fountain. Failure to follow these instructions may result in electric shock, injury, or property damage.

• Sekirite elektrik: Ensure the fountain is connected to a properly grounded outlet. Do not modify the plug or use an adapter. Keep the electrical cord and connections dry. Disconnect power before performing any maintenance or cleaning.
• Sekirite dlo: Use clean, fresh water. Do not allow children or pets to play with or drink from the fountain.
• Plasman: Place the fountain on a stable, level surface to prevent tipping and ensure proper water flow. Avoid placing it near electrical outlets or other sensitive equipment where splashing could cause damage.
• Manyen: The fountain is made of fiber resin. Handle with care during assembly and relocation to prevent damage.
• Operasyon: Never operate the pump without sufficient water, as this can damage the pump. The auto shut-off feature is a safety measure, but regular water level checks are recommended.

3. Pake kontni

Carefully unpack all components and inspect them for any damage. If any parts are missing or damaged, please contact XBrand customer support.

• Fountain Body (Base, Middle Tier, Top Tier with Pineapple Finial)
• Water Pump with Auto Shut-Off Sensor
• Kawoutchou
• Electrical Cord with Adapter

Figi 2: Eksploze view diagram showing the fountain's main components: hose, auto-shut-off pump, water tank, and electrical cord with adapter.

4. Asanble ak Enstalasyon

Follow these steps to assemble and set up your XBrand 3-Tier Water Fountain:

1. Chwazi Kote: Select a level, stable outdoor location for your fountain, ensuring it is within reach of a grounded electrical outlet.
2. Assemble Tiers: Carefully stack the fountain tiers, starting with the largest base, then the middle tier, and finally the top tier with the pineapple finial. Ensure they are securely seated.
3. Konekte ponp: Attach the provided hose to the outlet of the water pump.
4. Pozisyon Ponp: Place the pump inside the water tank located in the lowest basin of the fountain. Route the electrical cord out of the fountain through the designated opening, ensuring it does not interfere with water flow or stability.
5. Ranpli ak dlo: Fill the lowest basin of the fountain with clean, distilled water until the pump is fully submerged. Do not overfill.
6. Konekte pouvwa: Plug the electrical cord into a grounded outdoor outlet. The pump will begin circulating water, and the fountain will start flowing.

Figure 3: The auto shut-off pump and easy-to-connect electrical plug for simple setup.

5. Operasyon Enstriksyon

Once assembled and filled with water, operating your fountain is straightforward:

• Kòmanse Fontèn nan: Plug the electrical cord into a grounded outlet. The pump will activate, and water will begin to flow through the tiers.
• Nivo dlo: Regularly check the water level in the lowest basin. Due to evaporation and splashing, water levels will decrease over time. Refill as needed to ensure the pump remains fully submerged.
• Karakteristik fèmen otomatik: The integrated pump includes an auto shut-off sensor. If the water level drops too low, the pump will automatically turn off to prevent damage. If this occurs, unplug the fountain, refill with water, and then plug it back in to resume operation.
• Ajiste koule a: Gen kèk ponp ki ka gen yon switch pou ajiste vitès koule dlo a. Si genyen, ajiste l selon debi dlo ou vle a.

Figi 4: Close-up view of the pineapple top tier of the XBrand water fountain, with water gently cascading.

6. Antretyen

Regular maintenance will ensure the longevity and optimal performance of your fountain.

• Chak jou/Chak semèn: Tcheke nivo dlo a epi ranpli li jan sa nesesè.
• Chak mwa: Disconnect power. Drain old water and clean the fountain basins with warm water and a soft cloth to remove any algae, dirt, or mineral deposits. Avoid harsh chemicals. Refill with clean water.
• Netwayaj ponp: Periodically clean the pump impeller and intake screen to prevent blockages and maintain efficient water flow. Refer to the pump's specific instructions for detailed cleaning.
• Winterization: In areas with freezing temperatures, drain all water from the fountain and pump. Clean the fountain thoroughly and store it indoors in a dry, protected area to prevent damage from ice expansion.

Figi 5: Detaye view of water flowing into one of the basins of the XBrand 3-Tier Water Fountain.

NAN. Depanaj

If you encounter issues with your fountain, refer to the following common problems and solutions:

8. Espesifikasyon

• Modèl: HD400
• Mak: XBrand
• Materyèl: Fiber Resin
• Koulè: Brown
• Dimansyon pwodwi: 22.8"L x 22.8"L x 51"H
• Pwa atik: 32 liv
• Sous pouvwa: Elektrik (Kòd)
• Pousantaj koule ponp: 450 L/h (99 GPH)
• Karakteristik espesyal: Ponp Auto Shut-Off
• UPC: 728990744574

Figure 6: Diagram illustrating the dimensions of the 51-inch tall XBrand 3-Tier Water Fountain.

9. Garanti ak sipò

XBrand products are manufactured with quality and durability in mind. For specific warranty information or technical support, please refer to the warranty card included with your purchase or visit the official XBrand websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.

For further assistance, please contact XBrand customer service.