Avenli 4-Person Inflatable Square Spa User Manual

1. Entwodiksyon

Thank you for choosing the Avenli 4-Person Inflatable Square Spa. This manual provides essential information for the safe and efficient use of your new spa. Please read all instructions carefully before setup and operation to ensure proper functionality and to prevent injury.

This inflatable spa offers a relaxing experience with a capacity for up to 4 people, heating water to a maximum of 104°F (40°C). Its portable design allows for quick setup and easy storage, making it ideal for various outdoor settings.

Figure 1.1: The Avenli Inflatable Square Spa in an outdoor setting.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Si ou pa swiv enstriksyon sekirite sa yo, sa ka lakòz blesi grav oswa lanmò.

• Always supervise children around the spa.
• Do not use the spa if the water temperature exceeds 104°F (40°C).
• Consult a physician before use if you are pregnant, have health conditions, or are on medication.
• Evite itilize spa a imedyatman apre fè egzèsis difisil.
• Do not consume alcohol or drugs before or during spa use.
• Ensure the spa is placed on a flat, level surface capable of supporting the spa's weight when filled (approximately 1,200 pounds / 544 kg) and occupants.
• Always connect the spa to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI).
• Do not operate the spa in temperatures below 39°F (4°C).
• Kenbe tout konpozan elektrik yo sèk epi lwen dlo.

3. Pake kontni

Verifye ke tout konpozan ki nan lis anba a yo prezan nan pake ou a:

Figure 3.1: All included components for the Avenli Inflatable Square Spa.

• Spa Liner
• Ponp Inite
• Kouvri tèt
• Twal Tè
• GFCI (Ground Fault Circuit Interrupter)
• Valv lè
• Inflating Hose
• Pump Unit Connectors (3)
• bouchon (2)
• Twous reparasyon
• Filtre katouch
• Filtration Cartridge Support

4. Enstalasyon

The Avenli Inflatable Square Spa is designed for quick and easy setup, typically taking less than 10 minutes for initial inflation.

4.1 Preparasyon Sit

• Choose a flat, level surface free of sharp objects or debris.
• Ensure the chosen location can support the weight of the filled spa and its occupants (approximately 1,200 lbs / 544 kg).
• Place the ground cloth on the prepared surface.

4.2 Enflasyon

• Unfold the spa liner onto the ground cloth.
• Connect the inflating hose to the pump unit and the spa's air valve.
• Plug in the pump unit and activate the inflation function. Inflate until the spa walls are firm to the touch but not over-inflated.
• Disconnect the hose and securely close the air valve.

Figure 4.1: The Avenli Inflatable Square Spa fully inflated with the pump unit connected.

4.3 Ranpli Dlo ak Koneksyon Ponp

• Fill the spa with water to the recommended fill line (approximately 148 gallons / 560 liters).
• Connect the pump unit to the spa's water inlet and outlet using the provided connectors. Ensure all connections are tight to prevent leaks.
• Plug the GFCI-protected power cord into a suitable electrical outlet (110-120V, 60Hz).

5. Operasyon Enstriksyon

The spa's functions are controlled via the intuitive LED display on the pump unit.

Figure 5.1: Avenli Spa LED Control Panel.

5.1 Fonksyon Panel Kontwòl

• Dirije ekspozisyon: Shows current water temperature and settings.
• Bouton Ogmante / Diminye Tanperati: Adjust the desired water temperature. The maximum temperature is 104°F (40°C).
• Bouton Chalè: Activates the heating system. The heater will maintain the set temperature.
• Bouton masaj: Activates the air jet massage system.
• Filtration Button: Controls the water filtration system.
• Bouton fèmen: Bloke oswa debloke panèl kontwòl la pou anpeche chanjman aksidan.
• Temperature Units Selector: Toggles between Celsius (°C) and Fahrenheit (°F).

5.2 Chofe Dlo a

Press the Heat Button to begin heating the water. The LED display will show the current water temperature. Once the desired temperature is reached, the heater will automatically turn off and on as needed to maintain it.

5.3 Activating Massage Jets

Press the Massage Button to activate the soothing air jets. Press again to turn them off.

Figure 5.2: The spa with active massage jets creating bubbles.

6. Antretyen

Regular maintenance is crucial for the longevity and hygiene of your spa.

6.1 Water Filtration and Cleaning

• Regularly check and clean the filter cartridge. Replace it every few weeks or when visibly dirty.
• Maintain proper water chemistry using appropriate spa chemicals (not included).
• Clean the spa liner periodically with a soft cloth and mild cleaner.

6.2 Drenaj ak Depo

• To drain the spa, use the convenient bottom drain plug. Ensure water is directed away from electrical components and property.
• Once drained, thoroughly dry the spa liner and pump unit.
• Deflate the spa completely for compact storage.
• When not in use, cover the spa with the included all-weather resistant cover to protect it from debris and UV exposure.

Figure 6.1: The spa covered with its all-weather resistant cover.

NAN. Depanaj

This section addresses common issues you might encounter with your Avenli spa.

If issues persist after attempting these solutions, please contact Avenli customer support.

8. Espesifikasyon

Detailed specifications for the Avenli 4-Person Inflatable Square Spa:

Figure 8.1: Key dimensions of the Avenli Inflatable Square Spa.

9. Garanti ak sipò

For warranty information, technical support, or to purchase replacement parts, please contact Avenli customer service directly. Refer to the contact information provided with your product packaging or visit the official Avenli websit.

Please have your model number (WSL17606US) and purchase date available when contacting support.