Inkbird ITC-C216T Thermostat Instruction Manual

Entwodiksyon

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

Enfòmasyon sou Sekirite

• Ensure the thermostat is connected to a grounded power outlet.
• Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
• Keep the device away from water, except for the IP67 rated probe.
• Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte sèvis kliyan si gen pwoblèm.
• Toujou debranche aparèy la anvan w netwaye oswa fè antretyen.

Pwodwi souview

Eleman

Imaj: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

1. LCD with White Backlight: Displays current and set temperatures/times.
2. Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
3. Sòti: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
4. Tanperati sonde: 2m/79in long, IP67 waterproof for accurate temperature detection.
5. Antre: 100~240Vac 50/60Hz max 10A.
6. Ikon chofaj: Indicates heating operation.
7. Cooling Icon: Indicates cooling operation.
8. Timing Icon: Indicates timing function is active.
9. Icône Lock Timoun: Endike ke sekirite timoun lan angaje.
10. KÒMANSE: Displays start temperature or time.
11. SISPANN: Displays stop temperature or time.

Karakteristik kle

Imaj: The Inkbird ITC-C216T thermostat showcasing karakteristik prensipal li yo.

• Ekspozisyon LCD retroeklere: Easy to read current and set values, even in low light.
• Three Control Modes: Temperature, Cycle Time, and Countdown.
• Lajè ranje tanperati: Controls temperatures from -40°C to 100°C.
• Alam Tanperati Wo/Bò: Customizable alarm values with an option to mute the buzzer.
• Kalibrasyon Tanperati: Allows for fine-tuning temperature readings.
• Cooling Delay: Protects cooling equipment from short cycling.
• Verrouillage timoun: Anpeche chanjman aksidantèl nan paramèt yo.
• Fonksyon memwa: Retains all settings after a power interruption.
• Sond ki enpèmeyab IP67: Suitable for use in soil or submerged in water.

Enstalasyon

1. Dekonpoze: Carefully remove the thermostat and its components from the packaging.
2. Ploge nan: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
3. Konekte aparèy: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
4. Sond Pozisyon: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

Mòd fonksyònman

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Temperature Mode

Imaj: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

• Peze a MÒD button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
• Peze SET to enter setting mode. The START temperature will flash. Use the UP epi DESANN buttons to adjust the desired START temperature.
• Peze SET again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP epi DESANN.
• Peze SET one more time to save the settings and exit.
• If START temperature is lower than STOP temperature, the thermostat operates in mòd chofaj.
• If START temperature is higher than STOP temperature, the thermostat operates in mòd refwadisman.

2. Cycle Time Mode (P01)

Imaj: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

• Peze MÒD until P01 is displayed.
• Peze SET. The ON time will flash. Adjust using UP/DESANN.
• Peze SET. The OFF time will flash. Adjust using UP/DESANN.
• Peze SET to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

• P02: Countdown ON
  

  Imaj: Diagram explaining the Countdown ON Mode (P02).

  The device will turn ON after the set countdown period.
• P03: Countdown OFF
  

  Imaj: Diagram explaining the Countdown OFF Mode (P03).

  The device will turn OFF after the set countdown period.
• P04: Countdown ON & OFF
  

  Imaj: Diagram explaining the Countdown ON&OFF Mode (P04).

  The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

• Peze MÒD until P02, P03, or P04 is displayed.
• Peze SET. The countdown time(s) will flash. Adjust using UP/DESANN.
• Peze SET pou sove ak sòti.

Anviwònman avanse

Kalibrasyon Tanperati (CA)

Imaj: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

• Avèk aparèy la limen, peze epi kenbe bouton an SET button for approximately 3 seconds to enter the parameter settings.
• Sèvi ak la UP/DESANN buttons to navigate to the 'CA' (Calibration) setting.
• Peze SET, Lè sa a, sèvi ak UP/DESANN to adjust the calibration value (e.g., +0.5°C or -0.5°C).
• Peze SET pou konfime ak sòti.

Cooling Delay (Pt)

Imaj: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

• Enter parameter settings (press and hold SET pou 3 segonn).
• Navigate to 'Pt' (Cooling Delay).
• Adjust the delay time in minutes using UP/DESANN.
• Peze SET pou konfime ak sòti.

High/Low Temperature Alarms (AH/AL)

Imaj: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

• Enter parameter settings.
• Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
• Adjust the alarm temperature using UP/DESANN.
• Peze SET pou konfime.
• To mute the buzzer, press any button when the alarm sounds.

Timoun Lock

Imaj: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

• Peze epi kenbe la UP epi DESANN buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
• Repeat the action to unlock the device.

Fonksyon memwa & Reset faktori

• Fonksyon memwa: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
• Reset faktori: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

Aplikasyon

Imaj: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

• Reptile Terrariums and Aquariums
• Greenhouses and Plant Propagation
• Incubators for Eggs
• Home Brewing and Fermentation
• Controlling Freezers and Refrigerators
• Managing Heating Mats and other Home Appliances

Espesifikasyon

Depanaj

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

• Ekspozisyon pa limen: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
• Lekti tanperati ki pa egzak: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
• Aparèy la pa limen/etenn: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
• Alam lan sonnen kontinyèlman: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
• Paramèt yo pa anrejistre: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

Antretyen

• Netwayaj: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• Swen Sonde: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
• Depo: Si w ap sere aparèy la pou yon bon bout tan, asire w ke li pwòp epi sèk. Sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk.

Garanti ak sipò

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird websit la oubyen kontakte sèvis kliyan yo dirèkteman.

Ou ka jwenn plis enfòmasyon ak resous sipò lè w vizite Magazen Inkbird sou Amazon.