Manyèl Itilizatè Rapporteur Dijital SPI 31-040-9 PRO3600

1. Entwodiksyon

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

Karakteristik kle:

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. Pwodwi souview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. Enstalasyon

3.1 Enstalasyon batri

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Locate the battery compartment cover, typically on the underside or side of the unit.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. Fèmen kouvèti lòj batri a byen.

3.2 Premye pouvwa sou

Apre enstalasyon pil la, peze bouton an ON/OFF button to power on the device. The LCD display should illuminate and show a reading.

4. Operasyon Enstriksyon

4.1 Power On/Off

• Pou vire inite a ON, peze la ON/OFF bouton.
• Pou vire inite a OFF, peze la ON/OFF bouton ankò.
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. Peze a ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO bouton ankò.

4.3 Holding a Reading

To freeze the current reading on the display:

• Peze a KENBE button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the KENBE bouton ankò.

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Measuring Angles

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. Antretyen

5.1 Netwayaj

• Siye aparèy la avèk yon twal mou epi sèk.
• Pou pousyè tè ki difisil pou retire, yon ti kras damp Ou ka itilize yon twal ak savon dou, epi siye l touswit.
• Pa sèvi ak pwodui netwayaj abrazif, solvan, epi pa plonje aparèy la nan dlo.

5.2 Depo

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• Si w ap sere l pou yon bon bout tan, retire pil yo pou anpeche l koule.

NAN. Depanaj

• Aparèy la pa limen: Tcheke enstalasyon pil yo epi asire w pil yo pa fin itilize. Ranplase yo si sa nesesè.
• Lekti ki pa egzak: Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Unit shuts off unexpectedly: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• Ekspozisyon an fèb oswa siyman: Pil yo ka fèb. Ranplase yo.

7. Espesifikasyon

8. Garanti ak sipò

8.1 Enfòmasyon sou Garanti

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 Sipò pou Kliyan

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official websit entènèt la oubyen magazen kote ou te achte pwodwi a.