Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Antec A30 Pro CPU Air Cooler. Designed for efficient cooling of Intel and AMD CPUs, the A30 Pro features a 90mm blue LED fan and a robust heat dissipation system. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
Karakteristik kle:
- Blue LED design for enhanced aesthetics.
- Large heat dissipation fin for effective cooling.
- Low noise level of 35 dB(A).
- Equipped with 2 copper heat pipes and aluminum fins.
Enfòmasyon sou Sekirite
Please observe the following safety guidelines to prevent damage to the product or injury:
- Asire w ke sistèm òdinatè w la etenn epi debranche li nan priz miray la anvan enstalasyon oswa antretyen.
- Handle the cooler and its components with care to avoid bending fins or damaging heat pipes.
- Kenbe soti nan atenn timoun yo.
- Do not attempt to modify the cooler. Unauthorized modifications may void your warranty and pose safety risks.
- Wear anti-static gloves or use proper grounding techniques when handling internal computer components to prevent electrostatic discharge (ESD).
Kontni pake
Verifye ke tout atik yo prezan nan pakè a:
- Antec A30 Pro CPU Cooler (with integrated 90mm fan)
- Mounting Hardware Kit (for Intel and AMD sockets)
Enstalasyon ak Enstalasyon
The Antec A30 Pro CPU Air Cooler is compatible with various Intel and AMD CPU sockets. The installation process may vary slightly depending on your specific motherboard and CPU socket type. Refer to your motherboard's manual for specific CPU cooler mounting instructions if needed.
Etap Jeneral Enstalasyon:
- Prepare CPU a: Ensure your CPU is properly seated in its socket. Clean any old thermal paste from the CPU surface and the cooler's base using isopropyl alcohol and a lint-free cloth.
- Aplike keratin tèmik: Apply a small, pea-sized amount of thermal paste to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
- Tache Parantèz Montaj: Depending on your CPU socket (Intel or AMD), attach the appropriate mounting brackets to the cooler's base or motherboard as per the included hardware kit instructions.
- Mete glasyè a an pozisyon: Carefully align the cooler over the CPU, ensuring the mounting holes or clips match.
- Fikse glasyè a: Gently press down and secure the cooler using the provided screws or clips. Tighten screws in a diagonal pattern to ensure even pressure. Do not overtighten.
- Konekte kab vantilatè a: Locate the CPU_FAN header on your motherboard and connect the 3-pin fan cable from the Antec A30 Pro cooler.
Image: Antec A30 Pro CPU Air Cooler. This image displays the Antec A30 Pro CPU Air Cooler, featuring a 90mm blue LED fan, aluminum fins, and two copper heat pipes extending from the base. The mounting brackets are visible at the bottom.
Enstriksyon Operasyon
Once installed, the Antec A30 Pro CPU Air Cooler operates automatically. The fan speed is typically controlled by the motherboard's BIOS/UEFI settings based on CPU temperature, ensuring optimal cooling performance while minimizing noise.
- Pouvwa sou: After installation, power on your computer. The blue LED fan should illuminate and begin spinning.
- Anviwònman BIOS/UEFI yo: You can access your motherboard's BIOS/UEFI settings during startup to monitor CPU temperatures and adjust fan curves if desired. Consult your motherboard manual for specific instructions.
- Siveyans: Use system monitoring software to keep track of CPU temperatures, especially during demanding tasks, to ensure the cooler is functioning effectively.
Antretyen
Antretyen regilye ede asire lonjevite ak pèfòmans optimal radyatè CPU ou a.
- Retire pousyè: Periodically (every 3-6 months, or more frequently in dusty environments) clean dust from the fan blades and heatsink fins. Use compressed air or a soft brush. Ensure the fan is held stationary while cleaning with compressed air to prevent over-spinning and potential damage.
- Pat tèmik: If you remove the cooler for any reason, it is recommended to clean off the old thermal paste and apply new thermal paste before reinstallation.
- Enspeksyon: Occasionally inspect the fan for any signs of wear or damage, and ensure the mounting hardware remains secure.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fan not spinning / No LED | Fan cable not connected or loose. | Check the 3-pin fan cable connection to the CPU_FAN header on the motherboard. Ensure it is securely seated. |
| High CPU temperatures | Improper thermal paste application; Cooler not seated correctly; Excessive dust on heatsink/fan. | Reapply thermal paste; Re-seat the cooler, ensuring even pressure; Clean the heatsink and fan thoroughly. Verify fan is spinning. |
| Excessive fan noise | Dust accumulation; Fan bearing issue; Fan hitting cables. | Clean the fan blades. Ensure no cables are obstructing the fan. If noise persists, the fan may require replacement. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 0-761345-77752-0 |
| Dimansyon pwodwi | 4.53 x 3.54 x 5.43 pous |
| Pwa atik | 3.53 ons |
| Mak | Antec |
| Pouvwa Connector Kalite | 3-Pin |
| Voltage | 12 Vòlt (DC) |
| Wattage | 3 wat |
| Metòd refwadisman | Air |
| Aparèy konpatib | Desktop CPUs (Intel/AMD) |
| Nivo bri | 35 Decibels (dB(A)) |
| Materyèl | Aluminum (fins), Copper (heat pipes) |
| Maksimòm vitès wotasyon | 1800 RPM |
| UPC | 761345777520 |
Garanti ak sipò
Antec products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please visit the official Antec websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe prèv acha ou pou reklamasyon garanti.
Ofisyèl Antec Websit: www.antec.com
