RecPro RV Speaker Switch 3-Position Control Panel User Manual

Entwodiksyon

Thank you for choosing the RecPro RV Speaker Switch 3-Position Control Panel. This manual provides essential information for the proper installation, operation, and maintenance of your speaker switch. This device allows you to easily switch between interior and exterior speakers, or play audio through both simultaneously, enhancing your RV audio experience. Its low-profile black design integrates seamlessly with most RV interiors.

Ki sa ki nan bwat la

• RecPro RV Speaker Switch (Model: RP-1802)

Pwodwi souview

The RecPro RV Speaker Switch features a simple, intuitive design for controlling your RV's audio output.

Figi 1: Devan view of the RecPro RV Speaker Switch, showing the labeled twist knob for speaker selection.

The front panel includes a single twist knob with three clearly marked positions:

• NAN: Directs audio to the interior speakers only.
• Tou de: Directs audio to both interior and exterior speakers simultaneously.
• SOTI: Directs audio to the exterior speakers only.

Figure 2: The speaker switch highlighting its easy-to-use design and ability to control interior, exterior, or both speaker zones.

Enstalasyon

Monte switch la

The RecPro RV Speaker Switch is designed for flush mounting. Ensure you have adequate space behind the mounting surface for wiring connections.

• Choose a suitable location in your RV, typically near your audio head unit.
• Refer to the dimensions below to create a rough opening for the switch.
• Insert the switch into the opening and secure it using appropriate fasteners (not included) through the mounting holes on the faceplate.

Figure 3: Detailed measurements for the RecPro RV Speaker Switch, including the rough opening dimensions for installation.

Enstriksyon fil elektrik

The speaker switch connects to your audio head unit and both sets of speakers (interior and exterior). It uses screw terminals for secure connections. Enpòtan: Disconnect all power to your audio system before beginning installation to prevent electrical shock or damage to components.

Figi 4: Dèyè view of the speaker switch, showing the pre-attached wiring harness for connection.

Refer to the wiring diagram below for correct connections. Each wire is color-coded and labeled for clarity.

Figure 5: Comprehensive wiring diagram for the RecPro RV Speaker Switch (Model RP-1802), illustrating connections for radio and both interior and exterior speakers.

1. Idantifye fil oratè yo: Your RV's audio system will have positive (+) and negative (-) wires for each speaker channel (Left and Right, Interior and Exterior).
2. Connect Radio Output:
   • Konekte a Orange (RADIO L+) wire from the switch to your radio's Left Positive (+) output.
   • Konekte a Black (RADIO L-) wire from the switch to your radio's Left Negative (-) output.
   • Konekte a Blue (RADIO R+) wire from the switch to your radio's Right Positive (+) output.
   • Konekte a Gray (RADIO R-) wire from the switch to your radio's Right Negative (-) output.
3. Connect Interior Speakers:
   • Konekte a Green (INSIDE L+) wire from the switch to your interior Left Positive (+) speaker wire.
   • Konekte a White (INSIDE L-) wire from the switch to your interior Left Negative (-) speaker wire.
   • Konekte a Yellow (INSIDE R+) wire from the switch to your interior Right Positive (+) speaker wire.
   • Konekte a Red (INSIDE R-) wire from the switch to your interior Right Negative (-) speaker wire.
4. Connect Exterior Speakers:
   • Konekte a Light Blue (OUTSIDE L+) wire from the switch to your exterior Left Positive (+) speaker wire.
   • Konekte a Teal (OUTSIDE L-) wire from the switch to your exterior Left Negative (-) speaker wire.
   • Konekte a Pink (OUTSIDE R+) wire from the switch to your exterior Right Positive (+) speaker wire.
   • Konekte a Brown (OUTSIDE R-) wire from the switch to your exterior Right Negative (-) speaker wire.
5. Koneksyon an sekirite: Ensure all connections are tight and properly insulated to prevent short circuits.
6. Retabli pouvwa: Once all connections are verified, restore power to your audio system.

Enstriksyon Operasyon

Using the RecPro RV Speaker Switch is straightforward. Simply turn the knob to select your desired audio output.

• IN Position: Rotate the knob to "IN" to play audio exclusively through your RV's interior speakers.
• BOTH Position: Rotate the knob to "BOTH" to play audio through both your interior and exterior speakers simultaneously.
• OUT Position: Rotate the knob to "OUT" to play audio exclusively through your RV's exterior speakers.

Adjust the volume using your RV's main audio head unit. The speaker switch does not control volume.

Antretyen

The RecPro RV Speaker Switch requires minimal maintenance.

• Kenbe aparèy la pwòp lè w siye l avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan.
• Periodically check wiring connections to ensure they remain secure, especially after long periods of travel or vibration.
• Ensure no moisture or liquids come into contact with the internal components.

Depanaj

Espesifikasyon

Enfòmasyon sou Garanti

For specific warranty details regarding your RecPro RV Speaker Switch, please refer to the warranty documentation included with your purchase or visit the official RecPro websit la. Kenbe prèv acha ou pou reklamasyon garanti.

Sipò pou Kliyan

If you have any questions, require technical assistance, or need to report an issue with your RecPro RV Speaker Switch, please contact RecPro customer support.

You can typically find contact information on the official RecPro websit: RecPro Store on Amazon.