EGLO Priddy 1-Light Pendant Instruction Manual

1. Entwodiksyon

Mèsi pou acha aasing the EGLO Priddy 1-Light Pendant. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

2. Enfòmasyon sou Sekirite

• AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan disjonktè a oswa bwat fizib la anvan enstalasyon oswa antretyen.
• Tout koneksyon elektrik yo dwe fèt an akò ak kòd lokal yo, òdonans yo, oswa Kòd Elektrik Nasyonal la (NEC). Konsilte yon elektrisyen kalifye si ou pa abitye ak koneksyon fil elektrik ki kòrèk yo.
• Asire w ke sifas kote w ap monte aparèy la ka sipòte pwa li.
• Pa konekte aparèy sa a ak yon sistèm elektrik ki pa gen koneksyon ak tè.
• Pa depase wat maksimòm lantage espesifye pou anpoul la.
• Manyen aparèy la avèk prekosyon pou evite domaj.

3. Pake kontni

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.

• Priddy 1-Light Pendant (Black Exterior, White Interior Metal Shade)
• Twous pyès ki nan konpitè aliye
• Manyèl Enstriksyon

Image 1: EGLO Priddy 1-Light Pendant, showcasing its black exterior and white interior metal shade.

4. Enstalasyon ak Enstalasyon

Yo rekòmande enstalasyon pwofesyonèl pou pwodui sa a.

4.1 Preparasyon pou Enstalasyon

1. Fèmen kouran nan disjoncteurs a oswa bwat fusible.
2. Clear the work area and ensure you have all necessary tools (screwdriver, wire strippers, etc.).

4.2 Monte aparèy la

1. Attach the mounting bracket to the junction box in the ceiling using the provided screws.
2. Connect the fixture's ground wire (usually bare copper or green) to the ground wire from the junction box.
3. Connect the fixture's white wire to the white (neutral) wire from the junction box.
4. Connect the fixture's black wire to the black (hot) wire from the junction box.
5. Secure all wire connections with wire nuts.
6. Ak anpil atansyon mete tout fil nan bwat junction la.
7. Attach the fixture canopy to the mounting bracket, securing it with the provided screws or nuts.

4.3 Adjusting Hanging Length

The pendant features an adjustable hanging length via its black cable. To adjust, loosen the cable grip at the canopy, pull the cable to the desired length, and then tighten the grip securely. Ensure the fixture hangs level.

Image 2: The EGLO Priddy Pendant installed in a dining room, demonstrating its adjustable hanging length.

4.4 Enstalasyon anpoul

1. Insert one E26 Medium base LED compatible bulb (not included) into the socket.
2. Pa depase wat maksimòm lantage nan 60 wat.

5. Operasyon Enstriksyon

Once installed and a bulb is inserted, restore power at the circuit breaker. The pendant light can then be operated using a standard wall switch connected to the fixture's circuit. The fixture is LED compatible, allowing for energy-efficient lighting.

6. Antretyen

6.1 Netwayaj

To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.

6.2 Ranplasman anpoul

Before replacing the bulb, turn off power at the circuit breaker and allow the bulb to cool. Unscrew the old bulb and screw in a new E26 Medium base LED compatible bulb, ensuring it does not exceed 60 watts.

NAN. Depanaj

• Limyè pa limen:
  • Check that the power is on at the circuit breaker.
  • Asire w ke anpoul la byen enstale epi li pa gen pwoblèm.
  • Verifye tout koneksyon fil yo an sekirite.
• Limyè k ap flache:
  • Asire w ke anpoul la byen vise nan priz la.
  • Tcheke pou koneksyon fil ki lach.
  • If using an LED bulb, ensure it is compatible with your dimmer switch (if applicable).

8. Espesifikasyon

9. Garanti ak sipò

This EGLO Priddy 1-Light Pendant is covered by a Garanti manifakti 1 zan apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Li pa kouvri domaj ki soti nan move enstalasyon, aksidan, move itilizasyon, abi, oswa modifikasyon san otorizasyon.

For warranty claims or technical support, please contact EGLO customer service. Refer to the EGLO official websit pou detay kontak.

10. Videyo pwodwi ofisyèl la