Craftmade Eos 52" Ceiling Fan Instruction Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Craftmade Eos 52" Ceiling Fan with LED Lights. Please read thoroughly before beginning installation to ensure safe and proper use of the product. Keep this manual for future reference.

2. Enfòmasyon enpòtan sou sekirite

Always disconnect power at the main fuse box or circuit breaker before beginning installation, cleaning, or making any repairs. Failure to do so could result in electrical shock or serious injury.

All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring procedures, consult a qualified electrician.

Ensure the ceiling structure is capable of supporting the weight of the fan (approximately 17.2 pounds) and that the outlet box used for mounting is specifically listed for ceiling fan support.

Pwodui sa a gen pwodui chimik Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt domaj repwodiktif. Lave men w apre w fin manyen w.

3. Pake kontni

Verifye ke tout konpozan ki nan lis anba a yo enkli nan pake ou a:

• Fan Motè Asanble
• 5 Custom Eos Blades
• Integrated Light Kit with 4 x 4W 3000 CCT Dimmable LED Bulbs
• 4 Clear Glass Shades
• Tij anba 6 pous
• Mounting Bracket
• Pake pyès ki nan konpitè (vis, rondelles, boulon fil, elatriye)
• Chenn rale (pou vitès vantilatè ak kontwòl limyè)

4. Enstalasyon ak Enstalasyon

The Craftmade Eos ceiling fan is designed for dual mounting, allowing installation on either a flat ceiling or an angled ceiling up to 23 degrees.

4.1. Etap Pre-Enstalasyon yo

• Fèmen kouran nan disjoncteurs a oswa bwat fusible.
• Depake tout konpozan yo ak anpil atansyon epi mete yo sou yon sifas pwòp e mou pou evite reyur.
• Identify all parts using the package contents list.

4.2. Enstalasyon Vantilatè a

1. Securely attach the mounting bracket to the ceiling joist or a suitable electrical outlet box rated for ceiling fan support. Use appropriate hardware for your ceiling type.
2. Assemble the downrod to the fan motor assembly, ensuring all screws are tightened.
3. Leve asanblaj vantilatè a avèk prekosyon epi pann li nan sipò montaj la.

4.3. Koneksyon fil elektrik

Connect the fan's electrical wires to the household wiring according to the provided wiring diagram in the separate wiring instructions. Ensure all connections are secure using wire nuts and that no loose strands of wire are exposed.

4.4. Atache lam yo ak twous limyè a

1. Attach the five custom Eos blades to the blade arms, then secure the blade arms to the motor housing. Ensure all screws are firmly tightened.
2. Install the integrated light kit to the bottom of the fan motor assembly.
3. Screw in the four dimmable LED bulbs into the light kit sockets.
4. Attach the clear glass shades over the bulbs.

Imaj: Yon plen view of the Craftmade Eos 52" Ceiling Fan, showcasing its brushed polished nickel finish, five light wood-grain blades, and four clear glass light shades with exposed LED bulbs. Two pull chains are visible below the light kit.

5. Operasyon Enstriksyon

5.1. Kontwòl vitès fanatik

The fan is equipped with a standard pull chain for speed control. Pull the chain once to turn the fan on at high speed. Subsequent pulls will cycle through medium speed, low speed, and off.

• Pull 1: Gwo vitès
• Pull 2: Vitès Mwayen
• Pull 3: Vitès ki ba
• Pull 4: Off

5.2. Reversible Motor Function

The fan features a reversible motor for year-round comfort. A switch on the motor housing allows you to change the direction of blade rotation.

• Warm Weather (Counter-clockwise rotation): Mete switch la nan pozisyon ki fè lam yo vire nan sans kontrè zegwi mont lan. Sa kreye yon koule lè anba, ki pwodui yon ti van fre.
• Cool Weather (Clockwise rotation): Set the switch to the position that causes the blades to rotate clockwise. This creates an upward airflow, circulating warm air trapped near the ceiling without creating a direct draft.

Toujou etenn vantilatè a epi tann jiskaske lam yo sispann nèt anvan ou chanje direksyon wotasyon an.

5.3. Operasyon Limyè LED

The integrated LED light kit is controlled by a separate pull chain. Pull the chain to turn the lights on or off. The LED bulbs are dimmable, and brightness can be adjusted by holding the pull chain (if supported by the light kit's dimmer function, refer to specific light kit instructions).

5.4. Optional Remote Control

Optional remote controls are available and sold separately for convenient operation. If you purchase a remote control, refer to its specific manual for pairing and usage instructions.

6. Antretyen

Antretyen regilye ap ede prolonje lavi ak pèfòmans fanatik plafon ou a.

• Netwayaj: Netwaye lam vantilatè yo ak lojman motè a detanzantan avèk yon twal mou,amp twal. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki agresif, paske sa yo ka domaje fini an oswa konpozan elektrik yo.
• Ranfòse Fastener: Check all connections and screws periodically (at least twice a year) to ensure they remain secure. Loose connections can cause noise or wobbling.
• Lubrifikasyon: Motè vantilatè a grese pou tout tan e li pa bezwen plis wilaj.
• Anpoul: Replace LED bulbs only with the specified type (4 x 4W 3000 CCT Dimmable LED) to ensure proper function and dimming capabilities.

NAN. Depanaj

Si w gen pwoblèm ak vantilatè plafon w lan, gade pwoblèm ak solisyon komen sa yo:

7.1. Fan Does Not Operate

• Pa gen pouvwa: Check that power is supplied to the fan at the circuit breaker or fuse box.
• Koneksyon ki lach: Ensure all wire connections are secure within the canopy and switch housing.
• Pull Chain Position: Verify the fan pull chain is in the "on" position.

7.2. Fanatik tranble

• Loose Blades/Arms: Check that all blade screws and blade arm screws are tightened.
• Unbalanced Blades: Ensure blades are balanced. A blade balancing kit (often sold separately) can be used to correct wobbling.
• Montaj ki lach: Verify the mounting bracket is securely fastened to the ceiling joist or outlet box.
• Downrod Issues: Ensure the downrod is properly seated and secured in the mounting bracket and motor housing.

7.3. Lights Do Not Work

• Bulb Issues: Check if the LED bulbs are properly screwed in or if they need replacement.
• Light Kit Wiring: Ensure the wiring connections to the light kit are secure.
• Pull Chain Position: Verify the light pull chain is in the "on" position.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, technical support, or to purchase replacement parts, please contact Craftmade customer service directly. Refer to your product's packaging or the official Craftmade websit la pou jwenn enfòmasyon kontak ki pi resan yo.

You can also visit the official Craftmade store for additional resources and product information: Craftmade Store on Amazon