Orbit 55035 Nozzle Rack User Manual

1. Entwodiksyon

This manual provides essential information for the proper installation, operation, and maintenance of your Orbit 55035 Nozzle Rack. This product is designed to customize the performance of Orbit Saturn III/IV and Titan Gear-Drive Rotor Water Sprinklers, allowing for precise water distribution and efficiency. Please read these instructions thoroughly before proceeding with installation or adjustment.

2. Pwodwi souview

The Orbit 55035 Nozzle Rack contains a selection of replacement nozzles with varying precipitation rates. These nozzles are crucial for optimizing your sprinkler system's performance, minimizing runoff, and ensuring even water coverage across different soil types and conditions. The rack is specifically designed for compatibility with Generation 2 Saturn III sprinklers (manufactured starting 2021) and Titan Gear-Drive Rotors.

Image 2.1: The Orbit 55035 Nozzle Rack, displaying multiple nozzles with different Gallons Per Minute (GPM) ratings for flow customization.

2.1 Konpatibilite

It is important to identify the generation of your Saturn III sprinkler head to ensure proper nozzle selection. The 55035 Nozzle Rack is compatible with Generation 2 Saturn III sprinklers, which feature vertically aligned adjustment screws and the Orbit logo near the center of the sprinkler head. Generation 1 Saturn III sprinklers (made until 2021) require Orbit Product #55075 nozzles, identifiable by offset adjustment screws and the logo near the bottom.

Image 2.2: A visual guide illustrating the differences between Generation 1 and Generation 2 Orbit Saturn III sprinkler heads, and their corresponding nozzle rack compatibility (55075 for Gen 1, 55035 for Gen 2).

3. Enstalasyon ak Enstalasyon

The nozzles in the 55035 rack are designed for easy replacement in compatible Orbit gear-drive rotor sprinklers. Follow these steps to install or replace a nozzle:

1. Fèmen rezèv dlo a: Before beginning, ensure the water supply to the sprinkler system is completely shut off to prevent accidental activation.
2. Locate Sprinkler Head: Identify the Saturn III/IV or Titan gear-drive rotor sprinkler head where the nozzle needs to be replaced.
3. Access Nozzle: Use a flathead screwdriver to unscrew the built-in adjustment screw located on the top of the sprinkler head. This screw typically holds the nozzle in place.
4. Retire ansyen bouch la (si sa aplikab): Carefully pull out the existing nozzle from the sprinkler head. Note its orientation for reference.
5. Select New Nozzle: Choose the desired nozzle from the 55035 rack based on the required precipitation rate and spray pattern for your specific watering needs.
6. Insert New Nozzle: Align the new nozzle correctly and insert it into the sprinkler head. Ensure it sits flush and securely.
7. Secure Nozzle: Re-insert and tighten the adjustment screw with the flathead screwdriver. Do not overtighten.
8. Retabli rezèv dlo a: Relouvri tiyo dlo a epi tcheke si li fonksyone byen e si gen flit.

Imaj 3.1: Yon gwo plan view of a hand using a flathead screwdriver to access the adjustment mechanism on top of a sprinkler head, a key step in nozzle replacement.

4. Operasyon Enstriksyon

After installing the desired nozzle, you can fine-tune the sprinkler's performance to achieve optimal coverage and water efficiency. Orbit gear-drive rotors allow for adjustment of both the arc (rotation) and the throw distance.

4.1 Adjusting Arc (Rotation)

The arc can be adjusted from 40 to 360 degrees, allowing you to direct water precisely and avoid hardscape surfaces. Use a flathead screwdriver to turn the arc adjustment screw on the top of the sprinkler head. Turning the screw in one direction will increase the arc, while turning it in the other will decrease it.

4.2 Adjusting Throw Distance (Radius)

The throw distance can be adjusted from approximately 15 to 25 feet, depending on water pressure and the installed nozzle. Use a flathead screwdriver to turn the radius adjustment screw on the top of the sprinkler head. This adjustment helps ensure efficient watering for your specific needs.

Imaj 4.1: Yon imaj anwo-anba view of an Orbit sprinkler head, highlighting the distinct adjustment points for rotation (arc) and throw distance (radius) using a flathead screwdriver.

Image 4.2: An Orbit sprinkler head actively spraying water across a lawn, demonstrating its coverage capabilities after proper nozzle selection and adjustment.

5. Antretyen

Regular maintenance ensures the longevity and optimal performance of your sprinkler system and nozzles.

• Netwayaj filtè: The sprinkler head features a bottom inlet filter designed to prevent clogging. Periodically inspect and clean this filter to remove any debris that may accumulate and restrict water flow.
• Enspeksyon bouch: Occasionally check the installed nozzle for any signs of wear, damage, or blockages. A damaged nozzle can lead to uneven spray patterns or reduced performance. Replace if necessary.
• Winterization: In colder climates, ensure your sprinkler system is properly winterized to prevent damage from freezing temperatures. Consult your sprinkler system's main manual for detailed winterization procedures.

NAN. Depanaj

If you encounter issues with your sprinkler's performance after installing a new nozzle, consider the following common troubleshooting steps:

• Modèl espre inegal: This can be caused by a partially clogged nozzle, incorrect arc adjustment, or insufficient water pressure. Check the nozzle for debris and clean the inlet filter. Re-adjust the arc as needed.
• Reduced Throw Distance: Possible causes include low water pressure, a partially clogged nozzle, or incorrect radius adjustment. Verify water pressure, clean the nozzle and filter, and adjust the throw distance screw.
• No Water or Low Flow: Ensure the water supply is fully open. Check the inlet filter for severe clogging. Confirm the nozzle is correctly seated and the adjustment screw is not overtightened, which could restrict flow.
• Leaks at Sprinkler Head: Ensure the nozzle is properly installed and the adjustment screw is tightened. Check the sprinkler body for cracks or damage.

7. Espesifikasyon

8. Garanti ak sipò

For specific warranty information regarding your Orbit 55035 Nozzle Rack or compatible sprinkler heads, please refer to the documentation included with your original product purchase or visit the official Orbit website. For further assistance or technical support, please contact Orbit customer service.

You can find more information and products from Orbit by visiting their official store: Magazen Òbit sou Amazon.